Bored over?
02-25-2004, 05:23 PM
#1
Guest
Posts: n/a
Bored over?
I just got through talking with a local parts store trying to scope out
rings for this piston and the parts guys said there should be a number on
top of the piston that would indicate whether it was bored over or not.
All I can see is an arrow pointing to the direction of install. This would
mean the pistons are all stock? I can take a closer look when I get home
but if I can see the arrow should I not be able to see the bore number?
Thanks,
Bill
http://members.bigvalley.net/wuji/je.../cylinder2.jpg
http://members.bigvalley.net/wuji/je.../cylinder3.jpg
http://members.bigvalley.net/wuji/je.../cylinder4.jpg
rings for this piston and the parts guys said there should be a number on
top of the piston that would indicate whether it was bored over or not.
All I can see is an arrow pointing to the direction of install. This would
mean the pistons are all stock? I can take a closer look when I get home
but if I can see the arrow should I not be able to see the bore number?
Thanks,
Bill
http://members.bigvalley.net/wuji/je.../cylinder2.jpg
http://members.bigvalley.net/wuji/je.../cylinder3.jpg
http://members.bigvalley.net/wuji/je.../cylinder4.jpg
02-25-2004, 05:34 PM
#2
Guest
Posts: n/a
Re: Bored over?
The over sized number has always been obvious to me. And would be a
very big disappointment.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I just got through talking with a local parts store trying to scope out
> rings for this piston and the parts guys said there should be a number on
> top of the piston that would indicate whether it was bored over or not.
>
> All I can see is an arrow pointing to the direction of install. This would
> mean the pistons are all stock? I can take a closer look when I get home
> but if I can see the arrow should I not be able to see the bore number?
>
> Thanks,
>
> Bill
>
> http://members.bigvalley.net/wuji/je.../cylinder2.jpg
> http://members.bigvalley.net/wuji/je.../cylinder3.jpg
> http://members.bigvalley.net/wuji/je.../cylinder4.jpg
very big disappointment.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I just got through talking with a local parts store trying to scope out
> rings for this piston and the parts guys said there should be a number on
> top of the piston that would indicate whether it was bored over or not.
>
> All I can see is an arrow pointing to the direction of install. This would
> mean the pistons are all stock? I can take a closer look when I get home
> but if I can see the arrow should I not be able to see the bore number?
>
> Thanks,
>
> Bill
>
> http://members.bigvalley.net/wuji/je.../cylinder2.jpg
> http://members.bigvalley.net/wuji/je.../cylinder3.jpg
> http://members.bigvalley.net/wuji/je.../cylinder4.jpg
02-25-2004, 05:34 PM
#3
Guest
Posts: n/a
Re: Bored over?
The over sized number has always been obvious to me. And would be a
very big disappointment.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I just got through talking with a local parts store trying to scope out
> rings for this piston and the parts guys said there should be a number on
> top of the piston that would indicate whether it was bored over or not.
>
> All I can see is an arrow pointing to the direction of install. This would
> mean the pistons are all stock? I can take a closer look when I get home
> but if I can see the arrow should I not be able to see the bore number?
>
> Thanks,
>
> Bill
>
> http://members.bigvalley.net/wuji/je.../cylinder2.jpg
> http://members.bigvalley.net/wuji/je.../cylinder3.jpg
> http://members.bigvalley.net/wuji/je.../cylinder4.jpg
very big disappointment.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I just got through talking with a local parts store trying to scope out
> rings for this piston and the parts guys said there should be a number on
> top of the piston that would indicate whether it was bored over or not.
>
> All I can see is an arrow pointing to the direction of install. This would
> mean the pistons are all stock? I can take a closer look when I get home
> but if I can see the arrow should I not be able to see the bore number?
>
> Thanks,
>
> Bill
>
> http://members.bigvalley.net/wuji/je.../cylinder2.jpg
> http://members.bigvalley.net/wuji/je.../cylinder3.jpg
> http://members.bigvalley.net/wuji/je.../cylinder4.jpg
02-25-2004, 05:34 PM
#4
Guest
Posts: n/a
Re: Bored over?
The over sized number has always been obvious to me. And would be a
very big disappointment.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I just got through talking with a local parts store trying to scope out
> rings for this piston and the parts guys said there should be a number on
> top of the piston that would indicate whether it was bored over or not.
>
> All I can see is an arrow pointing to the direction of install. This would
> mean the pistons are all stock? I can take a closer look when I get home
> but if I can see the arrow should I not be able to see the bore number?
>
> Thanks,
>
> Bill
>
> http://members.bigvalley.net/wuji/je.../cylinder2.jpg
> http://members.bigvalley.net/wuji/je.../cylinder3.jpg
> http://members.bigvalley.net/wuji/je.../cylinder4.jpg
very big disappointment.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I just got through talking with a local parts store trying to scope out
> rings for this piston and the parts guys said there should be a number on
> top of the piston that would indicate whether it was bored over or not.
>
> All I can see is an arrow pointing to the direction of install. This would
> mean the pistons are all stock? I can take a closer look when I get home
> but if I can see the arrow should I not be able to see the bore number?
>
> Thanks,
>
> Bill
>
> http://members.bigvalley.net/wuji/je.../cylinder2.jpg
> http://members.bigvalley.net/wuji/je.../cylinder3.jpg
> http://members.bigvalley.net/wuji/je.../cylinder4.jpg
02-25-2004, 06:10 PM
#5
Guest
Posts: n/a
Re: Bored over?
Like the disappointment this guy must have felt, knowing the blocks
useless except maybe as a boat anchor:
http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"L.W.(ßill) ------ III" wrote:
>
> The over sized number has always been obvious to me. And would be a
> very big disappointment.
useless except maybe as a boat anchor:
http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"L.W.(ßill) ------ III" wrote:
>
> The over sized number has always been obvious to me. And would be a
> very big disappointment.
02-25-2004, 06:10 PM
#6
Guest
Posts: n/a
Re: Bored over?
Like the disappointment this guy must have felt, knowing the blocks
useless except maybe as a boat anchor:
http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"L.W.(ßill) ------ III" wrote:
>
> The over sized number has always been obvious to me. And would be a
> very big disappointment.
useless except maybe as a boat anchor:
http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"L.W.(ßill) ------ III" wrote:
>
> The over sized number has always been obvious to me. And would be a
> very big disappointment.
02-25-2004, 06:10 PM
#7
Guest
Posts: n/a
Re: Bored over?
Like the disappointment this guy must have felt, knowing the blocks
useless except maybe as a boat anchor:
http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"L.W.(ßill) ------ III" wrote:
>
> The over sized number has always been obvious to me. And would be a
> very big disappointment.
useless except maybe as a boat anchor:
http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"L.W.(ßill) ------ III" wrote:
>
> The over sized number has always been obvious to me. And would be a
> very big disappointment.
02-25-2004, 06:29 PM
#8
Guest
Posts: n/a
Re: Bored over?
Why is that Bill? Because it's been bored to it's last possible bore and
the engine is needing another?
I can't make out the number on the cylinder. Is that a 5?
Thanks,
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:403D2B7E.6C6F99FC@***.net...
> Like the disappointment this guy must have felt, knowing the blocks
> useless except maybe as a boat anchor:
> http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "L.W.(ßill) ------ III" wrote:
> >
> > The over sized number has always been obvious to me. And would be a
> > very big disappointment.
the engine is needing another?
I can't make out the number on the cylinder. Is that a 5?
Thanks,
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:403D2B7E.6C6F99FC@***.net...
> Like the disappointment this guy must have felt, knowing the blocks
> useless except maybe as a boat anchor:
> http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "L.W.(ßill) ------ III" wrote:
> >
> > The over sized number has always been obvious to me. And would be a
> > very big disappointment.
02-25-2004, 06:29 PM
#9
Guest
Posts: n/a
Re: Bored over?
Why is that Bill? Because it's been bored to it's last possible bore and
the engine is needing another?
I can't make out the number on the cylinder. Is that a 5?
Thanks,
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:403D2B7E.6C6F99FC@***.net...
> Like the disappointment this guy must have felt, knowing the blocks
> useless except maybe as a boat anchor:
> http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "L.W.(ßill) ------ III" wrote:
> >
> > The over sized number has always been obvious to me. And would be a
> > very big disappointment.
the engine is needing another?
I can't make out the number on the cylinder. Is that a 5?
Thanks,
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:403D2B7E.6C6F99FC@***.net...
> Like the disappointment this guy must have felt, knowing the blocks
> useless except maybe as a boat anchor:
> http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "L.W.(ßill) ------ III" wrote:
> >
> > The over sized number has always been obvious to me. And would be a
> > very big disappointment.
02-25-2004, 06:29 PM
#10
Guest
Posts: n/a
Re: Bored over?
Why is that Bill? Because it's been bored to it's last possible bore and
the engine is needing another?
I can't make out the number on the cylinder. Is that a 5?
Thanks,
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:403D2B7E.6C6F99FC@***.net...
> Like the disappointment this guy must have felt, knowing the blocks
> useless except maybe as a boat anchor:
> http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "L.W.(ßill) ------ III" wrote:
> >
> > The over sized number has always been obvious to me. And would be a
> > very big disappointment.
the engine is needing another?
I can't make out the number on the cylinder. Is that a 5?
Thanks,
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:403D2B7E.6C6F99FC@***.net...
> Like the disappointment this guy must have felt, knowing the blocks
> useless except maybe as a boat anchor:
> http://www.off-road.com/jeep/tech/en...eadconv/14.jpg
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "L.W.(ßill) ------ III" wrote:
> >
> > The over sized number has always been obvious to me. And would be a
> > very big disappointment.