Body bolts
#2
Guest
Posts: n/a
Re: Body bolts
I wish you luck.....
Not one came out of my old CJ7's body... Got lucky and snapped a few,
but the rest spun and I had to grind the heads off the bolts. Tried a
sawsall through the mount, but the rubber ruined the blades too fast.
I am just thankful I got to toss the old body in the trash....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Not one came out of my old CJ7's body... Got lucky and snapped a few,
but the rest spun and I had to grind the heads off the bolts. Tried a
sawsall through the mount, but the rubber ruined the blades too fast.
I am just thankful I got to toss the old body in the trash....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
#3
Guest
Posts: n/a
Re: Body bolts
I wish you luck.....
Not one came out of my old CJ7's body... Got lucky and snapped a few,
but the rest spun and I had to grind the heads off the bolts. Tried a
sawsall through the mount, but the rubber ruined the blades too fast.
I am just thankful I got to toss the old body in the trash....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Not one came out of my old CJ7's body... Got lucky and snapped a few,
but the rest spun and I had to grind the heads off the bolts. Tried a
sawsall through the mount, but the rubber ruined the blades too fast.
I am just thankful I got to toss the old body in the trash....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
#4
Guest
Posts: n/a
Re: Body bolts
I wish you luck.....
Not one came out of my old CJ7's body... Got lucky and snapped a few,
but the rest spun and I had to grind the heads off the bolts. Tried a
sawsall through the mount, but the rubber ruined the blades too fast.
I am just thankful I got to toss the old body in the trash....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Not one came out of my old CJ7's body... Got lucky and snapped a few,
but the rest spun and I had to grind the heads off the bolts. Tried a
sawsall through the mount, but the rubber ruined the blades too fast.
I am just thankful I got to toss the old body in the trash....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Lovs2fly wrote:
>
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
#5
Guest
Posts: n/a
Re: Body bolts
Yep good luck! After having several jeeps and doing restorations and
repairs I took every body bolt out of my 04TJ put anti-seize on the threads
and put them all back and I mean every body bolt.
Coasty
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4422FDEE.CCF99E32@sympatico.ca...
>I wish you luck.....
>
> Not one came out of my old CJ7's body... Got lucky and snapped a few,
> but the rest spun and I had to grind the heads off the bolts. Tried a
> sawsall through the mount, but the rubber ruined the blades too fast.
>
> I am just thankful I got to toss the old body in the trash....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Lovs2fly wrote:
>>
>> I about to lift the body off the frame of my 93 wrangler. But three bolts
>> will not move.
>> Two are just plain tight the other is spinning. I can not get to the
>> nuts/plates to stop them from spinning. Any suggestions or help?
>>
>> Thanks,
>> Dennis
repairs I took every body bolt out of my 04TJ put anti-seize on the threads
and put them all back and I mean every body bolt.
Coasty
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4422FDEE.CCF99E32@sympatico.ca...
>I wish you luck.....
>
> Not one came out of my old CJ7's body... Got lucky and snapped a few,
> but the rest spun and I had to grind the heads off the bolts. Tried a
> sawsall through the mount, but the rubber ruined the blades too fast.
>
> I am just thankful I got to toss the old body in the trash....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Lovs2fly wrote:
>>
>> I about to lift the body off the frame of my 93 wrangler. But three bolts
>> will not move.
>> Two are just plain tight the other is spinning. I can not get to the
>> nuts/plates to stop them from spinning. Any suggestions or help?
>>
>> Thanks,
>> Dennis
#6
Guest
Posts: n/a
Re: Body bolts
Yep good luck! After having several jeeps and doing restorations and
repairs I took every body bolt out of my 04TJ put anti-seize on the threads
and put them all back and I mean every body bolt.
Coasty
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4422FDEE.CCF99E32@sympatico.ca...
>I wish you luck.....
>
> Not one came out of my old CJ7's body... Got lucky and snapped a few,
> but the rest spun and I had to grind the heads off the bolts. Tried a
> sawsall through the mount, but the rubber ruined the blades too fast.
>
> I am just thankful I got to toss the old body in the trash....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Lovs2fly wrote:
>>
>> I about to lift the body off the frame of my 93 wrangler. But three bolts
>> will not move.
>> Two are just plain tight the other is spinning. I can not get to the
>> nuts/plates to stop them from spinning. Any suggestions or help?
>>
>> Thanks,
>> Dennis
repairs I took every body bolt out of my 04TJ put anti-seize on the threads
and put them all back and I mean every body bolt.
Coasty
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4422FDEE.CCF99E32@sympatico.ca...
>I wish you luck.....
>
> Not one came out of my old CJ7's body... Got lucky and snapped a few,
> but the rest spun and I had to grind the heads off the bolts. Tried a
> sawsall through the mount, but the rubber ruined the blades too fast.
>
> I am just thankful I got to toss the old body in the trash....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Lovs2fly wrote:
>>
>> I about to lift the body off the frame of my 93 wrangler. But three bolts
>> will not move.
>> Two are just plain tight the other is spinning. I can not get to the
>> nuts/plates to stop them from spinning. Any suggestions or help?
>>
>> Thanks,
>> Dennis
#7
Guest
Posts: n/a
Re: Body bolts
Yep good luck! After having several jeeps and doing restorations and
repairs I took every body bolt out of my 04TJ put anti-seize on the threads
and put them all back and I mean every body bolt.
Coasty
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4422FDEE.CCF99E32@sympatico.ca...
>I wish you luck.....
>
> Not one came out of my old CJ7's body... Got lucky and snapped a few,
> but the rest spun and I had to grind the heads off the bolts. Tried a
> sawsall through the mount, but the rubber ruined the blades too fast.
>
> I am just thankful I got to toss the old body in the trash....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Lovs2fly wrote:
>>
>> I about to lift the body off the frame of my 93 wrangler. But three bolts
>> will not move.
>> Two are just plain tight the other is spinning. I can not get to the
>> nuts/plates to stop them from spinning. Any suggestions or help?
>>
>> Thanks,
>> Dennis
repairs I took every body bolt out of my 04TJ put anti-seize on the threads
and put them all back and I mean every body bolt.
Coasty
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4422FDEE.CCF99E32@sympatico.ca...
>I wish you luck.....
>
> Not one came out of my old CJ7's body... Got lucky and snapped a few,
> but the rest spun and I had to grind the heads off the bolts. Tried a
> sawsall through the mount, but the rubber ruined the blades too fast.
>
> I am just thankful I got to toss the old body in the trash....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Lovs2fly wrote:
>>
>> I about to lift the body off the frame of my 93 wrangler. But three bolts
>> will not move.
>> Two are just plain tight the other is spinning. I can not get to the
>> nuts/plates to stop them from spinning. Any suggestions or help?
>>
>> Thanks,
>> Dennis
#8
Guest
Posts: n/a
Re: Body bolts
Lovs2fly wrote:
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Real Jeepers, simply hold the new nut to the inside of the channel
frame like the big boys still use:
http://www.commtruck.ford.com/ctw/default.asp
God Bless America
DOH! My God. I'm starting to sound like Bill - I've been reading this
newsgroup too long
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Real Jeepers, simply hold the new nut to the inside of the channel
frame like the big boys still use:
http://www.commtruck.ford.com/ctw/default.asp
God Bless America
DOH! My God. I'm starting to sound like Bill - I've been reading this
newsgroup too long
#9
Guest
Posts: n/a
Re: Body bolts
Lovs2fly wrote:
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Real Jeepers, simply hold the new nut to the inside of the channel
frame like the big boys still use:
http://www.commtruck.ford.com/ctw/default.asp
God Bless America
DOH! My God. I'm starting to sound like Bill - I've been reading this
newsgroup too long
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Real Jeepers, simply hold the new nut to the inside of the channel
frame like the big boys still use:
http://www.commtruck.ford.com/ctw/default.asp
God Bless America
DOH! My God. I'm starting to sound like Bill - I've been reading this
newsgroup too long
#10
Guest
Posts: n/a
Re: Body bolts
Lovs2fly wrote:
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Real Jeepers, simply hold the new nut to the inside of the channel
frame like the big boys still use:
http://www.commtruck.ford.com/ctw/default.asp
God Bless America
DOH! My God. I'm starting to sound like Bill - I've been reading this
newsgroup too long
> I about to lift the body off the frame of my 93 wrangler. But three bolts
> will not move.
> Two are just plain tight the other is spinning. I can not get to the
> nuts/plates to stop them from spinning. Any suggestions or help?
>
> Thanks,
> Dennis
Real Jeepers, simply hold the new nut to the inside of the channel
frame like the big boys still use:
http://www.commtruck.ford.com/ctw/default.asp
God Bless America
DOH! My God. I'm starting to sound like Bill - I've been reading this
newsgroup too long