Bobbing TJ front fenders
Guest
Posts: n/a
Bobbing TJ front fenders
I understand there exists somewhere, good directions on how to bob the front
fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
right place I'd appreciate it.
tia Dale White dalewhite@aol.com
fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
right place I'd appreciate it.
tia Dale White dalewhite@aol.com
Guest
Posts: n/a
Re: Bobbing TJ front fenders
Dalewhite did pass the time by typing:
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to
> the right place I'd appreciate it.
> tia Dale White
overkill http://www.pollakstj.com/flatfender.html
http://azbackcountry.com/Tech/View.asp?ID=5
The site where the jeeper used tubes and sheet steel to build
flatfenders appears to be gone. :/ Mebby someone else here
knows where it went?
--
DougW
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to
> the right place I'd appreciate it.
> tia Dale White
overkill http://www.pollakstj.com/flatfender.html
http://azbackcountry.com/Tech/View.asp?ID=5
The site where the jeeper used tubes and sheet steel to build
flatfenders appears to be gone. :/ Mebby someone else here
knows where it went?
--
DougW
Guest
Posts: n/a
Re: Bobbing TJ front fenders
Dalewhite did pass the time by typing:
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to
> the right place I'd appreciate it.
> tia Dale White
overkill http://www.pollakstj.com/flatfender.html
http://azbackcountry.com/Tech/View.asp?ID=5
The site where the jeeper used tubes and sheet steel to build
flatfenders appears to be gone. :/ Mebby someone else here
knows where it went?
--
DougW
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to
> the right place I'd appreciate it.
> tia Dale White
overkill http://www.pollakstj.com/flatfender.html
http://azbackcountry.com/Tech/View.asp?ID=5
The site where the jeeper used tubes and sheet steel to build
flatfenders appears to be gone. :/ Mebby someone else here
knows where it went?
--
DougW
Guest
Posts: n/a
Re: Bobbing TJ front fenders
Dalewhite did pass the time by typing:
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to
> the right place I'd appreciate it.
> tia Dale White
overkill http://www.pollakstj.com/flatfender.html
http://azbackcountry.com/Tech/View.asp?ID=5
The site where the jeeper used tubes and sheet steel to build
flatfenders appears to be gone. :/ Mebby someone else here
knows where it went?
--
DougW
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to
> the right place I'd appreciate it.
> tia Dale White
overkill http://www.pollakstj.com/flatfender.html
http://azbackcountry.com/Tech/View.asp?ID=5
The site where the jeeper used tubes and sheet steel to build
flatfenders appears to be gone. :/ Mebby someone else here
knows where it went?
--
DougW
Guest
Posts: n/a
Re: Bobbing TJ front fenders
http://www.metalfusionfab.com/tj_tube_fenders.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dalewhite wrote:
>
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
> right place I'd appreciate it.
> tia Dale White dalewhite@aol.com
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dalewhite wrote:
>
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
> right place I'd appreciate it.
> tia Dale White dalewhite@aol.com
Guest
Posts: n/a
Re: Bobbing TJ front fenders
http://www.metalfusionfab.com/tj_tube_fenders.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dalewhite wrote:
>
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
> right place I'd appreciate it.
> tia Dale White dalewhite@aol.com
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dalewhite wrote:
>
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
> right place I'd appreciate it.
> tia Dale White dalewhite@aol.com
Guest
Posts: n/a
Re: Bobbing TJ front fenders
http://www.metalfusionfab.com/tj_tube_fenders.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dalewhite wrote:
>
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
> right place I'd appreciate it.
> tia Dale White dalewhite@aol.com
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dalewhite wrote:
>
> I understand there exists somewhere, good directions on how to bob the front
> fenders of a TJ and fit a fabricated stiffener. If anyone can direct me to the
> right place I'd appreciate it.
> tia Dale White dalewhite@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
MUDEATER
Jeep & 4x4 Items For Sale
2
Aug 11, 2015 07:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)