Binding noise from the rear (TJ '01) - Update
04-11-2004, 01:06 PM
#41
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
my export TJ doesn't.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Robert Brace" <rlbrace@shaw.ca> wrote in message
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
> "TW" <a t t w @ w a v e . c o . n z> wrote in message
> news:c5bda4$4kv$1@news.wave.co.nz...
> >
> > "Cherokee-LTD" <spammenot@home.com> wrote in message
> > news:hgaec.85882$Bk31.31561@twister01.bloor.is.net .cable.rogers.com...
> > >
> > > "TW" <a t t w @ w a v e . c o . n z> wrote in message
> > > news:c5b9f9$1kg$2@news.wave.co.nz...
> > > : "Handywired" <handywired@aol.com> wrote in message
> > > : news:20040411014142.00534.00000147@mb-m29.aol.com...
> > > : > >
> > > : > > The rear axles must hang to gain access to those top bolts. Lift
> > the
> > > : > > vehicle and support the frame so that the axle hangs down as far
> as
> > > : > > possible.
> > > : >
> > > : > Nah! I got mine off without doing that.
> > > : >
> > > : > Unless his axle/differential is different than my D35c... in which
> > case
> > > I
> > > : > am wrong <g>.
> > > : >
> > > : > -jeff
> > > :
> > > : Mine is Dana 44, thus the problem. Its pumpkin is bigger in size.
> > > :
> > > Okay, now you're just bragging LOL
> > > -Brian
> > >
> >
> > Nah, they are all the same (bigger) size in NZ ;-). Just got lucky with
> > that or else that would have been another upgrade in the pipeline. I
have
> > put a ------sheet together to budget for everything and its being coded
> > based on priority (high / moderate / low) and timeframe desired (6 / 12
/
> > 18 months). I think the very first one would be switching to Old Man
Emu
> > suspension, then 32 inch mud terrains. I think I have mentally prepared
> my
> > wife that its a life long process of continuous improvement, so she
should
> > be brave and not question my sanity so frequently and regularly.
> >
> > TW
> >
>
>
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Robert Brace" <rlbrace@shaw.ca> wrote in message
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
> "TW" <a t t w @ w a v e . c o . n z> wrote in message
> news:c5bda4$4kv$1@news.wave.co.nz...
> >
> > "Cherokee-LTD" <spammenot@home.com> wrote in message
> > news:hgaec.85882$Bk31.31561@twister01.bloor.is.net .cable.rogers.com...
> > >
> > > "TW" <a t t w @ w a v e . c o . n z> wrote in message
> > > news:c5b9f9$1kg$2@news.wave.co.nz...
> > > : "Handywired" <handywired@aol.com> wrote in message
> > > : news:20040411014142.00534.00000147@mb-m29.aol.com...
> > > : > >
> > > : > > The rear axles must hang to gain access to those top bolts. Lift
> > the
> > > : > > vehicle and support the frame so that the axle hangs down as far
> as
> > > : > > possible.
> > > : >
> > > : > Nah! I got mine off without doing that.
> > > : >
> > > : > Unless his axle/differential is different than my D35c... in which
> > case
> > > I
> > > : > am wrong <g>.
> > > : >
> > > : > -jeff
> > > :
> > > : Mine is Dana 44, thus the problem. Its pumpkin is bigger in size.
> > > :
> > > Okay, now you're just bragging LOL
> > > -Brian
> > >
> >
> > Nah, they are all the same (bigger) size in NZ ;-). Just got lucky with
> > that or else that would have been another upgrade in the pipeline. I
have
> > put a ------sheet together to budget for everything and its being coded
> > based on priority (high / moderate / low) and timeframe desired (6 / 12
/
> > 18 months). I think the very first one would be switching to Old Man
Emu
> > suspension, then 32 inch mud terrains. I think I have mentally prepared
> my
> > wife that its a life long process of continuous improvement, so she
should
> > be brave and not question my sanity so frequently and regularly.
> >
> > TW
> >
>
>
04-11-2004, 03:35 PM
#42
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
Real Jeeps would:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
04-11-2004, 03:35 PM
#43
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
Real Jeeps would:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
04-11-2004, 03:35 PM
#44
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
Real Jeeps would:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
04-11-2004, 03:35 PM
#45
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
Real Jeeps would:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Robert Brace wrote:
>
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom of
> the pumpkin back from the pinion flange? If you want to simply replace the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
04-11-2004, 07:28 PM
#46
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
"Robert Brace" <rlbrace@shaw.ca> wrote in message
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
04-11-2004, 07:28 PM
#47
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
"Robert Brace" <rlbrace@shaw.ca> wrote in message
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
04-11-2004, 07:28 PM
#48
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
"Robert Brace" <rlbrace@shaw.ca> wrote in message
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
04-11-2004, 07:28 PM
#49
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
"Robert Brace" <rlbrace@shaw.ca> wrote in message
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
news:JNdec.75780$Pk3.18882@pd7tw1no...
> TW;
> If you have a Dana 44 rear, don't you have a drain plug in the bottom
of
> the pumpkin back from the pinion flange? If you want to simply replace
the
> fluid without dealing with the cover, this should do it for you. If your
> Dana44 is the same as my Dana44?
> Bob
>
It is a Dana 44, but no drain plugs. We live in a strange world. It might
be another Jeep thing!
TW
04-11-2004, 09:53 PM
#50
Guest
Posts: n/a
Re: Binding noise from the rear (TJ '01) - Update
There aren't enough real jeeps to go around!
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com <you know the drill
jegp 'at' hotmail.com < at is really @
---- I Love My O|||||||O TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40799DF6.E718C16B@***.net...
| Real Jeeps would:
|
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
| God Bless America, ßill O|||||||O
| mailto:-------------------- http://www.----------.com/
|
| Robert Brace wrote:
| >
| > TW;
| > If you have a Dana 44 rear, don't you have a drain plug in the
bottom of
| > the pumpkin back from the pinion flange? If you want to simply
replace the
| > fluid without dealing with the cover, this should do it for you.
If your
| > Dana44 is the same as my Dana44?
| > Bob
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com <you know the drill
jegp 'at' hotmail.com < at is really @
---- I Love My O|||||||O TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40799DF6.E718C16B@***.net...
| Real Jeeps would:
|
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
| God Bless America, ßill O|||||||O
| mailto:-------------------- http://www.----------.com/
|
| Robert Brace wrote:
| >
| > TW;
| > If you have a Dana 44 rear, don't you have a drain plug in the
bottom of
| > the pumpkin back from the pinion flange? If you want to simply
replace the
| > fluid without dealing with the cover, this should do it for you.
If your
| > Dana44 is the same as my Dana44?
| > Bob
