Re: NV4500 into a 76 CJ-7 behind Chevy 350?
 

Hi Jim,
Neither do most of us, unless required to use electronic fuel
injection for SMOG purposes. We go so... much quicker with the Holley
850 double pumper: http://www.----------.com/holleySite.jpg
Or 750 CFM they chose to dyno this create motor:
http://www.sallee-chevrolet.com/Chev...s/safrzz4.html
God Bless America, ßill O|||||||O
mailto:--------------------

Drink wrote:
>
> Cool. I'm familiar with fuel injection but very little practical
> experience since, like many, "I don't do EFI". I read the Vette book and it
> all seems pretty simple now. Maybe the TPI book will discuss testing
> sensors or computer control. That's the next step for me. After making the
> darned thing run, of course:)
> Thanks much,
> Jim

Re: NV4500 into a 76 CJ-7 behind Chevy 350?
 

Hi Jim,
Neither do most of us, unless required to use electronic fuel
injection for SMOG purposes. We go so... much quicker with the Holley
850 double pumper: http://www.----------.com/holleySite.jpg
Or 750 CFM they chose to dyno this create motor:
http://www.sallee-chevrolet.com/Chev...s/safrzz4.html
God Bless America, ßill O|||||||O
mailto:--------------------

Drink wrote:
>
> Cool. I'm familiar with fuel injection but very little practical
> experience since, like many, "I don't do EFI". I read the Vette book and it
> all seems pretty simple now. Maybe the TPI book will discuss testing
> sensors or computer control. That's the next step for me. After making the
> darned thing run, of course:)
> Thanks much,
> Jim

Re: NV4500 into a 76 CJ-7 behind Chevy 350?
 

Well, I called Advance Adapters and the gear's on the way. They said that
I'd need to do "extensive" modifications. Possibly to the firewall and
floor pan. Does anybody have any experience with this? Will it fit without
a body lift? What are the options for modifications and what are they? How
about lowering the crossmember?
Jim
'76 CJ with (soon to be) Chevy V8/ Dodge NV4500/Dana300

"c" <c@me.org> wrote in message
news:Hrp_c.4516$6h7.2964@twister.rdc-kc.rr.com...
> Probably the best book on TPI swapping is the one sold at
> www.jagsthatrun.com. Their books are extremely detailed and informative. I
> have used the TPI book and the S-10 V8 Swap book. Both are great. The book
> will also answer a lot of your questions about which parts you need and
can
> use.
>
> HTH
> Chris
>
> "Drink" <drink@gnt.net> wrote in message
> news:chd2dh$ain$2@news.utelfla.com...
> > Hmmm. I guess I "played out" the field on this one:) Anyway, I
finally
> > found a Haynes manual which is the best I could do locally. Everybody
> tells
> > me that, "It's just impossible. There's NO WAY you can do what you're
> > talking about!" I'll take that challenge even just to prove that I'm
not
> as
> > crazy as they thought. Haha! Now, for the next step.
> > Anybody know anything about clutch/flywheel, shift linkage, tranny
> mounts
> > and driveshaft dimensions needed to put an NV4500 into my 76 CJ7 behind
a
> > Chevy V8 350?
> > Best Regards,
> > Jim
> > "Drink" <drink@gnt.net> wrote in message
> > news:cgsvrk$t3f$1@news.utelfla.com...
> > > Gents,
> > > I need some advice and figured you could help me. I've looked on
the
> > net
> > > and am overwhelmed with returns that don't give me the details I'm
> looking
> > > for. There's Gotta be a website that says, "Just get this and do that
> for
> > > the swap".
> > > I got an '89 V8 Vette engine with TPI injection. It should be a MAF
> > > system and I can scavenge "everything I need to make it work besides
the
> > > wiring harness" off the donor vehicle. I'll put it in the Jeep and
put
> an
> > > NV4500 behind it.
> > > What should I have besides the pieces I just mentioned? I don't
know
> > > about speed sensors to the tranny or solenoids to the purge canister,
> > > radiator, electric fan, Anti-Theft (VATS), etc. This will be great if
I
> > can
> > > make it work and want to avoid finding thing after thing that I didn't
> > get.
> > > P.S. I guess Chilton doesn't even make a manual for the '89 Vette and
> my
> > > hardcover manual doesn't address wiring schematics and TPI?!?
> > > Thanks for any help,
> > > Jim
> > > '76 CJ-7 258
> > >
> > >
> >
> >
>
>

Re: NV4500 into a 76 CJ-7 behind Chevy 350?
 

Well, I called Advance Adapters and the gear's on the way. They said that
I'd need to do "extensive" modifications. Possibly to the firewall and
floor pan. Does anybody have any experience with this? Will it fit without
a body lift? What are the options for modifications and what are they? How
about lowering the crossmember?
Jim
'76 CJ with (soon to be) Chevy V8/ Dodge NV4500/Dana300

"c" <c@me.org> wrote in message
news:Hrp_c.4516$6h7.2964@twister.rdc-kc.rr.com...
> Probably the best book on TPI swapping is the one sold at
> www.jagsthatrun.com. Their books are extremely detailed and informative. I
> have used the TPI book and the S-10 V8 Swap book. Both are great. The book
> will also answer a lot of your questions about which parts you need and
can
> use.
>
> HTH
> Chris
>
> "Drink" <drink@gnt.net> wrote in message
> news:chd2dh$ain$2@news.utelfla.com...
> > Hmmm. I guess I "played out" the field on this one:) Anyway, I
finally
> > found a Haynes manual which is the best I could do locally. Everybody
> tells
> > me that, "It's just impossible. There's NO WAY you can do what you're
> > talking about!" I'll take that challenge even just to prove that I'm
not
> as
> > crazy as they thought. Haha! Now, for the next step.
> > Anybody know anything about clutch/flywheel, shift linkage, tranny
> mounts
> > and driveshaft dimensions needed to put an NV4500 into my 76 CJ7 behind
a
> > Chevy V8 350?
> > Best Regards,
> > Jim
> > "Drink" <drink@gnt.net> wrote in message
> > news:cgsvrk$t3f$1@news.utelfla.com...
> > > Gents,
> > > I need some advice and figured you could help me. I've looked on
the
> > net
> > > and am overwhelmed with returns that don't give me the details I'm
> looking
> > > for. There's Gotta be a website that says, "Just get this and do that
> for
> > > the swap".
> > > I got an '89 V8 Vette engine with TPI injection. It should be a MAF
> > > system and I can scavenge "everything I need to make it work besides
the
> > > wiring harness" off the donor vehicle. I'll put it in the Jeep and
put
> an
> > > NV4500 behind it.
> > > What should I have besides the pieces I just mentioned? I don't
know
> > > about speed sensors to the tranny or solenoids to the purge canister,
> > > radiator, electric fan, Anti-Theft (VATS), etc. This will be great if
I
> > can
> > > make it work and want to avoid finding thing after thing that I didn't
> > get.
> > > P.S. I guess Chilton doesn't even make a manual for the '89 Vette and
> my
> > > hardcover manual doesn't address wiring schematics and TPI?!?
> > > Thanks for any help,
> > > Jim
> > > '76 CJ-7 258
> > >
> > >
> >
> >
>
>

Re: NV4500 into a 76 CJ-7 behind Chevy 350?
 

Well, I called Advance Adapters and the gear's on the way. They said that
I'd need to do "extensive" modifications. Possibly to the firewall and
floor pan. Does anybody have any experience with this? Will it fit without
a body lift? What are the options for modifications and what are they? How
about lowering the crossmember?
Jim
'76 CJ with (soon to be) Chevy V8/ Dodge NV4500/Dana300

"c" <c@me.org> wrote in message
news:Hrp_c.4516$6h7.2964@twister.rdc-kc.rr.com...
> Probably the best book on TPI swapping is the one sold at
> www.jagsthatrun.com. Their books are extremely detailed and informative. I
> have used the TPI book and the S-10 V8 Swap book. Both are great. The book
> will also answer a lot of your questions about which parts you need and
can
> use.
>
> HTH
> Chris
>
> "Drink" <drink@gnt.net> wrote in message
> news:chd2dh$ain$2@news.utelfla.com...
> > Hmmm. I guess I "played out" the field on this one:) Anyway, I
finally
> > found a Haynes manual which is the best I could do locally. Everybody
> tells
> > me that, "It's just impossible. There's NO WAY you can do what you're
> > talking about!" I'll take that challenge even just to prove that I'm
not
> as
> > crazy as they thought. Haha! Now, for the next step.
> > Anybody know anything about clutch/flywheel, shift linkage, tranny
> mounts
> > and driveshaft dimensions needed to put an NV4500 into my 76 CJ7 behind
a
> > Chevy V8 350?
> > Best Regards,
> > Jim
> > "Drink" <drink@gnt.net> wrote in message
> > news:cgsvrk$t3f$1@news.utelfla.com...
> > > Gents,
> > > I need some advice and figured you could help me. I've looked on
the
> > net
> > > and am overwhelmed with returns that don't give me the details I'm
> looking
> > > for. There's Gotta be a website that says, "Just get this and do that
> for
> > > the swap".
> > > I got an '89 V8 Vette engine with TPI injection. It should be a MAF
> > > system and I can scavenge "everything I need to make it work besides
the
> > > wiring harness" off the donor vehicle. I'll put it in the Jeep and
put
> an
> > > NV4500 behind it.
> > > What should I have besides the pieces I just mentioned? I don't
know
> > > about speed sensors to the tranny or solenoids to the purge canister,
> > > radiator, electric fan, Anti-Theft (VATS), etc. This will be great if
I
> > can
> > > make it work and want to avoid finding thing after thing that I didn't
> > get.
> > > P.S. I guess Chilton doesn't even make a manual for the '89 Vette and
> my
> > > hardcover manual doesn't address wiring schematics and TPI?!?
> > > Thanks for any help,
> > > Jim
> > > '76 CJ-7 258
> > >
> > >
> >
> >
>
>