Before I ebay this
#11
Guest
Posts: n/a
Re: Before I ebay this
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F7B0023.9730DF87@***.net...
> One of the wheels, I use for a griner stand. Mount an old tire
> filled with water and an old axle.
Exactly... I've got the neatest little welding table, made from
the old rear drums off my '67 Chrysler 300. Took two
pieces of 3" angle, 3' long, and welded them to the sides,
not knowing, of course, that you aren't supposed to weld
cast. Worked fine... doubles as an arbor press, using
a 6ton bottle jack.
__
Steve
..
#12
Guest
Posts: n/a
Re: Before I ebay this
We used to weld pipe to them. They work great as bottoms for dock
stands/supports.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Stephen Cowell" <scowell@sbcglobal.net> wrote in message
news:aMKeb.2690$Cx2.933@newssvr23.news.prodigy.com ...
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:3F7B0023.9730DF87@***.net...
> > One of the wheels, I use for a griner stand. Mount an old tire
> > filled with water and an old axle.
>
> Exactly... I've got the neatest little welding table, made from
> the old rear drums off my '67 Chrysler 300. Took two
> pieces of 3" angle, 3' long, and welded them to the sides,
> not knowing, of course, that you aren't supposed to weld
> cast. Worked fine... doubles as an arbor press, using
> a 6ton bottle jack.
> __
> Steve
> .
>
>
stands/supports.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Stephen Cowell" <scowell@sbcglobal.net> wrote in message
news:aMKeb.2690$Cx2.933@newssvr23.news.prodigy.com ...
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:3F7B0023.9730DF87@***.net...
> > One of the wheels, I use for a griner stand. Mount an old tire
> > filled with water and an old axle.
>
> Exactly... I've got the neatest little welding table, made from
> the old rear drums off my '67 Chrysler 300. Took two
> pieces of 3" angle, 3' long, and welded them to the sides,
> not knowing, of course, that you aren't supposed to weld
> cast. Worked fine... doubles as an arbor press, using
> a 6ton bottle jack.
> __
> Steve
> .
>
>
#13
Guest
Posts: n/a
Re: Before I ebay this
We used to weld pipe to them. They work great as bottoms for dock
stands/supports.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Stephen Cowell" <scowell@sbcglobal.net> wrote in message
news:aMKeb.2690$Cx2.933@newssvr23.news.prodigy.com ...
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:3F7B0023.9730DF87@***.net...
> > One of the wheels, I use for a griner stand. Mount an old tire
> > filled with water and an old axle.
>
> Exactly... I've got the neatest little welding table, made from
> the old rear drums off my '67 Chrysler 300. Took two
> pieces of 3" angle, 3' long, and welded them to the sides,
> not knowing, of course, that you aren't supposed to weld
> cast. Worked fine... doubles as an arbor press, using
> a 6ton bottle jack.
> __
> Steve
> .
>
>
stands/supports.
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
" Stephen Cowell" <scowell@sbcglobal.net> wrote in message
news:aMKeb.2690$Cx2.933@newssvr23.news.prodigy.com ...
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:3F7B0023.9730DF87@***.net...
> > One of the wheels, I use for a griner stand. Mount an old tire
> > filled with water and an old axle.
>
> Exactly... I've got the neatest little welding table, made from
> the old rear drums off my '67 Chrysler 300. Took two
> pieces of 3" angle, 3' long, and welded them to the sides,
> not knowing, of course, that you aren't supposed to weld
> cast. Worked fine... doubles as an arbor press, using
> a 6ton bottle jack.
> __
> Steve
> .
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Liberty
Jeep CJ Forum
7
01-04-2009 02:35 AM
jeepadmin
Jeep TJ Forum
1
12-10-2007 12:18 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)