ball joint pricing
#2
Guest
Posts: n/a
Re: ball joint pricing
Depending on where NTB gets their parts, prices vary a lot. I would think
the labor would be about 2 hours + front end alignment.
I think your best price would be no less than $220 parts, $240 labor. This
would include the front end alignment.
Paul Nelson
03 Rubi
in article 1163714479.075935.314090@e3g2000cwe.googlegroups.c om, bspear78 at
bspear78@hotmail.com wrote on 11/16/06 4:01 PM:
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
>
> bryan 97 TJ
>
#3
Guest
Posts: n/a
Re: ball joint pricing
Depending on where NTB gets their parts, prices vary a lot. I would think
the labor would be about 2 hours + front end alignment.
I think your best price would be no less than $220 parts, $240 labor. This
would include the front end alignment.
Paul Nelson
03 Rubi
in article 1163714479.075935.314090@e3g2000cwe.googlegroups.c om, bspear78 at
bspear78@hotmail.com wrote on 11/16/06 4:01 PM:
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
>
> bryan 97 TJ
>
#4
Guest
Posts: n/a
Re: ball joint pricing
Depending on where NTB gets their parts, prices vary a lot. I would think
the labor would be about 2 hours + front end alignment.
I think your best price would be no less than $220 parts, $240 labor. This
would include the front end alignment.
Paul Nelson
03 Rubi
in article 1163714479.075935.314090@e3g2000cwe.googlegroups.c om, bspear78 at
bspear78@hotmail.com wrote on 11/16/06 4:01 PM:
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
>
> bryan 97 TJ
>
#5
Guest
Posts: n/a
Re: ball joint pricing
Paul Nelson wrote:
> Depending on where NTB gets their parts, prices vary a lot. I would
> think the labor would be about 2 hours + front end alignment.
>
> I think your best price would be no less than $220 parts, $240 labor.
> This would include the front end alignment.
>
> Paul Nelson
> 03 Rubi
>
>
> bspear78 wrote:
>
>> what can I expect to pay for all 4 new ball joints and labor at a
>> garage?? I dont want to get screwed. NTB quoted me 800.00 and I
>> thought that was high.
>>
>>
>> bryan 97 TJ
Napa sez (note I price NCP Napa Chassis Part and not MRC)
MRC is the lower end and just isn't that good a part.
MRC is about 25$ each for upper and lower.
Ball Joint Upper NCP 2601291 $50
Ball Joint Lower NCP 2601292 $56
So that's $212 in parts for both sides. (plus tax)
While your in there may as well check all the steering joints and track bar.
--
DougW
> Depending on where NTB gets their parts, prices vary a lot. I would
> think the labor would be about 2 hours + front end alignment.
>
> I think your best price would be no less than $220 parts, $240 labor.
> This would include the front end alignment.
>
> Paul Nelson
> 03 Rubi
>
>
> bspear78 wrote:
>
>> what can I expect to pay for all 4 new ball joints and labor at a
>> garage?? I dont want to get screwed. NTB quoted me 800.00 and I
>> thought that was high.
>>
>>
>> bryan 97 TJ
Napa sez (note I price NCP Napa Chassis Part and not MRC)
MRC is the lower end and just isn't that good a part.
MRC is about 25$ each for upper and lower.
Ball Joint Upper NCP 2601291 $50
Ball Joint Lower NCP 2601292 $56
So that's $212 in parts for both sides. (plus tax)
While your in there may as well check all the steering joints and track bar.
--
DougW
#6
Guest
Posts: n/a
Re: ball joint pricing
Paul Nelson wrote:
> Depending on where NTB gets their parts, prices vary a lot. I would
> think the labor would be about 2 hours + front end alignment.
>
> I think your best price would be no less than $220 parts, $240 labor.
> This would include the front end alignment.
>
> Paul Nelson
> 03 Rubi
>
>
> bspear78 wrote:
>
>> what can I expect to pay for all 4 new ball joints and labor at a
>> garage?? I dont want to get screwed. NTB quoted me 800.00 and I
>> thought that was high.
>>
>>
>> bryan 97 TJ
Napa sez (note I price NCP Napa Chassis Part and not MRC)
MRC is the lower end and just isn't that good a part.
MRC is about 25$ each for upper and lower.
Ball Joint Upper NCP 2601291 $50
Ball Joint Lower NCP 2601292 $56
So that's $212 in parts for both sides. (plus tax)
While your in there may as well check all the steering joints and track bar.
--
DougW
> Depending on where NTB gets their parts, prices vary a lot. I would
> think the labor would be about 2 hours + front end alignment.
>
> I think your best price would be no less than $220 parts, $240 labor.
> This would include the front end alignment.
>
> Paul Nelson
> 03 Rubi
>
>
> bspear78 wrote:
>
>> what can I expect to pay for all 4 new ball joints and labor at a
>> garage?? I dont want to get screwed. NTB quoted me 800.00 and I
>> thought that was high.
>>
>>
>> bryan 97 TJ
Napa sez (note I price NCP Napa Chassis Part and not MRC)
MRC is the lower end and just isn't that good a part.
MRC is about 25$ each for upper and lower.
Ball Joint Upper NCP 2601291 $50
Ball Joint Lower NCP 2601292 $56
So that's $212 in parts for both sides. (plus tax)
While your in there may as well check all the steering joints and track bar.
--
DougW
#7
Guest
Posts: n/a
Re: ball joint pricing
Paul Nelson wrote:
> Depending on where NTB gets their parts, prices vary a lot. I would
> think the labor would be about 2 hours + front end alignment.
>
> I think your best price would be no less than $220 parts, $240 labor.
> This would include the front end alignment.
>
> Paul Nelson
> 03 Rubi
>
>
> bspear78 wrote:
>
>> what can I expect to pay for all 4 new ball joints and labor at a
>> garage?? I dont want to get screwed. NTB quoted me 800.00 and I
>> thought that was high.
>>
>>
>> bryan 97 TJ
Napa sez (note I price NCP Napa Chassis Part and not MRC)
MRC is the lower end and just isn't that good a part.
MRC is about 25$ each for upper and lower.
Ball Joint Upper NCP 2601291 $50
Ball Joint Lower NCP 2601292 $56
So that's $212 in parts for both sides. (plus tax)
While your in there may as well check all the steering joints and track bar.
--
DougW
> Depending on where NTB gets their parts, prices vary a lot. I would
> think the labor would be about 2 hours + front end alignment.
>
> I think your best price would be no less than $220 parts, $240 labor.
> This would include the front end alignment.
>
> Paul Nelson
> 03 Rubi
>
>
> bspear78 wrote:
>
>> what can I expect to pay for all 4 new ball joints and labor at a
>> garage?? I dont want to get screwed. NTB quoted me 800.00 and I
>> thought that was high.
>>
>>
>> bryan 97 TJ
Napa sez (note I price NCP Napa Chassis Part and not MRC)
MRC is the lower end and just isn't that good a part.
MRC is about 25$ each for upper and lower.
Ball Joint Upper NCP 2601291 $50
Ball Joint Lower NCP 2601292 $56
So that's $212 in parts for both sides. (plus tax)
While your in there may as well check all the steering joints and track bar.
--
DougW
#8
Guest
Posts: n/a
Re: ball joint pricing
bspear78 wrote:
>
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
> bryan 97 TJ
Well to just pull the axles and replace seals they want that kind of
money so changing the ball joints on top of pulling the axles, well.....
It is a pretty labor intensive job.
I would still shop around for pricing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
> bryan 97 TJ
Well to just pull the axles and replace seals they want that kind of
money so changing the ball joints on top of pulling the axles, well.....
It is a pretty labor intensive job.
I would still shop around for pricing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
#9
Guest
Posts: n/a
Re: ball joint pricing
bspear78 wrote:
>
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
> bryan 97 TJ
Well to just pull the axles and replace seals they want that kind of
money so changing the ball joints on top of pulling the axles, well.....
It is a pretty labor intensive job.
I would still shop around for pricing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
> bryan 97 TJ
Well to just pull the axles and replace seals they want that kind of
money so changing the ball joints on top of pulling the axles, well.....
It is a pretty labor intensive job.
I would still shop around for pricing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
#10
Guest
Posts: n/a
Re: ball joint pricing
bspear78 wrote:
>
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
> bryan 97 TJ
Well to just pull the axles and replace seals they want that kind of
money so changing the ball joints on top of pulling the axles, well.....
It is a pretty labor intensive job.
I would still shop around for pricing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>
> what can I expect to pay for all 4 new ball joints and labor at a
> garage?? I dont want to get screwed. NTB quoted me 800.00 and I thought
> that was high.
>
> bryan 97 TJ
Well to just pull the axles and replace seals they want that kind of
money so changing the ball joints on top of pulling the axles, well.....
It is a pretty labor intensive job.
I would still shop around for pricing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)