Anyone know how much axial and radial play the input shaft on an ax5
should have?

Thanks,
-jd

 

There is zero at the ball bearing, up and down, very slight in and
out because of the design of a ball bearing, it will wobble all over the
place out at the pilot bearing normally being held straight by the
crankshaft, as the pilot also holds the output shaft just on the inside
of the input shaft number fifteen at:
http://www.drivetrain.com/transilljeep_ax15.html Geez, that's a puny
box!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

jdarg wrote:
>
> Anyone know how much axial and radial play the input shaft on an ax5
> should have?
>
> Thanks,
> -jd

 

There is zero at the ball bearing, up and down, very slight in and
out because of the design of a ball bearing, it will wobble all over the
place out at the pilot bearing normally being held straight by the
crankshaft, as the pilot also holds the output shaft just on the inside
of the input shaft number fifteen at:
http://www.drivetrain.com/transilljeep_ax15.html Geez, that's a puny
box!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

jdarg wrote:
>
> Anyone know how much axial and radial play the input shaft on an ax5
> should have?
>
> Thanks,
> -jd

 

There is zero at the ball bearing, up and down, very slight in and
out because of the design of a ball bearing, it will wobble all over the
place out at the pilot bearing normally being held straight by the
crankshaft, as the pilot also holds the output shaft just on the inside
of the input shaft number fifteen at:
http://www.drivetrain.com/transilljeep_ax15.html Geez, that's a puny
box!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

jdarg wrote:
>
> Anyone know how much axial and radial play the input shaft on an ax5
> should have?
>
> Thanks,
> -jd

 

There is zero at the ball bearing, up and down, very slight in and
out because of the design of a ball bearing, it will wobble all over the
place out at the pilot bearing normally being held straight by the
crankshaft, as the pilot also holds the output shaft just on the inside
of the input shaft number fifteen at:
http://www.drivetrain.com/transilljeep_ax15.html Geez, that's a puny
box!
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

jdarg wrote:
>
> Anyone know how much axial and radial play the input shaft on an ax5
> should have?
>
> Thanks,
> -jd