AX15 Rebuild Bearings
Guest
Posts: n/a
AX15 Rebuild Bearings
Is there a trick to getting the bearings off the shafts? I was
going to use a gear puller hooked on first gear but it looks like
there is a C clip in there...
will a bearing seporator do the trick?
How do I press the new bearing back on?
Brian Moga
Waxhaw.Net
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
Hi Brian,
Remove the snap ring and slid it off by hand, with a little help
from a screwdriver. There has never been anything pressed together
inside a gear box: http://www.----------.com/temp/AX15.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
Brian Moga wrote:
>
> Is there a trick to getting the bearings off the shafts? I was
> going to use a gear puller hooked on first gear but it looks like
> there is a C clip in there...
>
> will a bearing seporator do the trick?
>
> How do I press the new bearing back on?
>
> Brian Moga
> Waxhaw.Net
Remove the snap ring and slid it off by hand, with a little help
from a screwdriver. There has never been anything pressed together
inside a gear box: http://www.----------.com/temp/AX15.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
Brian Moga wrote:
>
> Is there a trick to getting the bearings off the shafts? I was
> going to use a gear puller hooked on first gear but it looks like
> there is a C clip in there...
>
> will a bearing seporator do the trick?
>
> How do I press the new bearing back on?
>
> Brian Moga
> Waxhaw.Net
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
Hi Brian,
Remove the snap ring and slid it off by hand, with a little help
from a screwdriver. There has never been anything pressed together
inside a gear box: http://www.----------.com/temp/AX15.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
Brian Moga wrote:
>
> Is there a trick to getting the bearings off the shafts? I was
> going to use a gear puller hooked on first gear but it looks like
> there is a C clip in there...
>
> will a bearing seporator do the trick?
>
> How do I press the new bearing back on?
>
> Brian Moga
> Waxhaw.Net
Remove the snap ring and slid it off by hand, with a little help
from a screwdriver. There has never been anything pressed together
inside a gear box: http://www.----------.com/temp/AX15.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
Brian Moga wrote:
>
> Is there a trick to getting the bearings off the shafts? I was
> going to use a gear puller hooked on first gear but it looks like
> there is a C clip in there...
>
> will a bearing seporator do the trick?
>
> How do I press the new bearing back on?
>
> Brian Moga
> Waxhaw.Net
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
Hi Brian,
Remove the snap ring and slid it off by hand, with a little help
from a screwdriver. There has never been anything pressed together
inside a gear box: http://www.----------.com/temp/AX15.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
Brian Moga wrote:
>
> Is there a trick to getting the bearings off the shafts? I was
> going to use a gear puller hooked on first gear but it looks like
> there is a C clip in there...
>
> will a bearing seporator do the trick?
>
> How do I press the new bearing back on?
>
> Brian Moga
> Waxhaw.Net
Remove the snap ring and slid it off by hand, with a little help
from a screwdriver. There has never been anything pressed together
inside a gear box: http://www.----------.com/temp/AX15.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
Brian Moga wrote:
>
> Is there a trick to getting the bearings off the shafts? I was
> going to use a gear puller hooked on first gear but it looks like
> there is a C clip in there...
>
> will a bearing seporator do the trick?
>
> How do I press the new bearing back on?
>
> Brian Moga
> Waxhaw.Net
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
That link you posted contains ten references to "press"ing various parts
together and apart. Hubs, shafts, bearings... ;o)
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4378F21B.AB49B154@***.net...
> Hi Brian,
> Remove the snap ring and slid it off by hand, with a little help
> from a screwdriver. There has never been anything pressed together
> inside a gear box: http://www.----------.com/temp/AX15.pdf
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Brian Moga wrote:
> >
> > Is there a trick to getting the bearings off the shafts? I was
> > going to use a gear puller hooked on first gear but it looks like
> > there is a C clip in there...
> >
> > will a bearing seporator do the trick?
> >
> > How do I press the new bearing back on?
> >
> > Brian Moga
> > Waxhaw.Net
>
together and apart. Hubs, shafts, bearings... ;o)
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4378F21B.AB49B154@***.net...
> Hi Brian,
> Remove the snap ring and slid it off by hand, with a little help
> from a screwdriver. There has never been anything pressed together
> inside a gear box: http://www.----------.com/temp/AX15.pdf
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Brian Moga wrote:
> >
> > Is there a trick to getting the bearings off the shafts? I was
> > going to use a gear puller hooked on first gear but it looks like
> > there is a C clip in there...
> >
> > will a bearing seporator do the trick?
> >
> > How do I press the new bearing back on?
> >
> > Brian Moga
> > Waxhaw.Net
>
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
That link you posted contains ten references to "press"ing various parts
together and apart. Hubs, shafts, bearings... ;o)
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4378F21B.AB49B154@***.net...
> Hi Brian,
> Remove the snap ring and slid it off by hand, with a little help
> from a screwdriver. There has never been anything pressed together
> inside a gear box: http://www.----------.com/temp/AX15.pdf
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Brian Moga wrote:
> >
> > Is there a trick to getting the bearings off the shafts? I was
> > going to use a gear puller hooked on first gear but it looks like
> > there is a C clip in there...
> >
> > will a bearing seporator do the trick?
> >
> > How do I press the new bearing back on?
> >
> > Brian Moga
> > Waxhaw.Net
>
together and apart. Hubs, shafts, bearings... ;o)
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4378F21B.AB49B154@***.net...
> Hi Brian,
> Remove the snap ring and slid it off by hand, with a little help
> from a screwdriver. There has never been anything pressed together
> inside a gear box: http://www.----------.com/temp/AX15.pdf
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Brian Moga wrote:
> >
> > Is there a trick to getting the bearings off the shafts? I was
> > going to use a gear puller hooked on first gear but it looks like
> > there is a C clip in there...
> >
> > will a bearing seporator do the trick?
> >
> > How do I press the new bearing back on?
> >
> > Brian Moga
> > Waxhaw.Net
>
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
That link you posted contains ten references to "press"ing various parts
together and apart. Hubs, shafts, bearings... ;o)
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4378F21B.AB49B154@***.net...
> Hi Brian,
> Remove the snap ring and slid it off by hand, with a little help
> from a screwdriver. There has never been anything pressed together
> inside a gear box: http://www.----------.com/temp/AX15.pdf
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Brian Moga wrote:
> >
> > Is there a trick to getting the bearings off the shafts? I was
> > going to use a gear puller hooked on first gear but it looks like
> > there is a C clip in there...
> >
> > will a bearing seporator do the trick?
> >
> > How do I press the new bearing back on?
> >
> > Brian Moga
> > Waxhaw.Net
>
together and apart. Hubs, shafts, bearings... ;o)
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4378F21B.AB49B154@***.net...
> Hi Brian,
> Remove the snap ring and slid it off by hand, with a little help
> from a screwdriver. There has never been anything pressed together
> inside a gear box: http://www.----------.com/temp/AX15.pdf
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Brian Moga wrote:
> >
> > Is there a trick to getting the bearings off the shafts? I was
> > going to use a gear puller hooked on first gear but it looks like
> > there is a C clip in there...
> >
> > will a bearing seporator do the trick?
> >
> > How do I press the new bearing back on?
> >
> > Brian Moga
> > Waxhaw.Net
>
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
Hi Earle,
LOL Except, in the areas pictured, if we had to use something other
than our fingers to "press" it off it would be a puller, not a twenty
ton press used to slid an axle retainer ring off or on.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> That link you posted contains ten references to "press"ing various parts
> together and apart. Hubs, shafts, bearings... ;o)
>
> Earle
LOL Except, in the areas pictured, if we had to use something other
than our fingers to "press" it off it would be a puller, not a twenty
ton press used to slid an axle retainer ring off or on.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> That link you posted contains ten references to "press"ing various parts
> together and apart. Hubs, shafts, bearings... ;o)
>
> Earle
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
Hi Earle,
LOL Except, in the areas pictured, if we had to use something other
than our fingers to "press" it off it would be a puller, not a twenty
ton press used to slid an axle retainer ring off or on.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> That link you posted contains ten references to "press"ing various parts
> together and apart. Hubs, shafts, bearings... ;o)
>
> Earle
LOL Except, in the areas pictured, if we had to use something other
than our fingers to "press" it off it would be a puller, not a twenty
ton press used to slid an axle retainer ring off or on.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> That link you posted contains ten references to "press"ing various parts
> together and apart. Hubs, shafts, bearings... ;o)
>
> Earle
Guest
Posts: n/a
Re: AX15 Rebuild Bearings
Hi Earle,
LOL Except, in the areas pictured, if we had to use something other
than our fingers to "press" it off it would be a puller, not a twenty
ton press used to slid an axle retainer ring off or on.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> That link you posted contains ten references to "press"ing various parts
> together and apart. Hubs, shafts, bearings... ;o)
>
> Earle
LOL Except, in the areas pictured, if we had to use something other
than our fingers to "press" it off it would be a puller, not a twenty
ton press used to slid an axle retainer ring off or on.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Earle Horton wrote:
>
> That link you posted contains ten references to "press"ing various parts
> together and apart. Hubs, shafts, bearings... ;o)
>
> Earle
