AX-15 problem
Guest
Posts: n/a
AX-15 problem
My rig every February/March gets nearly impossible to shift into first.
usually have to double clutch . She also gets very "notchy" into second
and third.
I rarely go right into reverse I usually go into second first than over
to reverse or I might grind.
A couple days ago I could not get it out of reverse until I turned off
the motor.
Past two years I change the tranny fluid and the problem goes away in a
couple weeks. Im going to change my tranny fluid again. I always use
redline.
My ? is what the hells going on? I only put 3,000 , miles on my rig
every year. No leaking at all.
Prior owners receipts show the Clutch, slave cyl changed at 108,000
miles and flywheel resurfaced as well. Im at 124,700 now.
usually have to double clutch . She also gets very "notchy" into second
and third.
I rarely go right into reverse I usually go into second first than over
to reverse or I might grind.
A couple days ago I could not get it out of reverse until I turned off
the motor.
Past two years I change the tranny fluid and the problem goes away in a
couple weeks. Im going to change my tranny fluid again. I always use
redline.
My ? is what the hells going on? I only put 3,000 , miles on my rig
every year. No leaking at all.
Prior owners receipts show the Clutch, slave cyl changed at 108,000
miles and flywheel resurfaced as well. Im at 124,700 now.
Guest
Posts: n/a
Re: AX-15 problem
Refill your clutch reservoir with brake fluid. You may have to
bleed it's slave
too, to have the clutch again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
bleed it's slave
too, to have the clutch again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
Guest
Posts: n/a
Re: AX-15 problem
Refill your clutch reservoir with brake fluid. You may have to
bleed it's slave
too, to have the clutch again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
bleed it's slave
too, to have the clutch again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
Guest
Posts: n/a
Re: AX-15 problem
Refill your clutch reservoir with brake fluid. You may have to
bleed it's slave
too, to have the clutch again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
bleed it's slave
too, to have the clutch again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
Guest
Posts: n/a
Re: AX-15 problem
Water contamination?
That tranny does not have a high water vent, just a button vent so if
you get in too deep or splash right water can get in.
Does the fluid come out milky or like new? If even slightly milky, you
have likely found the problem.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
That tranny does not have a high water vent, just a button vent so if
you get in too deep or splash right water can get in.
Does the fluid come out milky or like new? If even slightly milky, you
have likely found the problem.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
Guest
Posts: n/a
Re: AX-15 problem
Water contamination?
That tranny does not have a high water vent, just a button vent so if
you get in too deep or splash right water can get in.
Does the fluid come out milky or like new? If even slightly milky, you
have likely found the problem.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
That tranny does not have a high water vent, just a button vent so if
you get in too deep or splash right water can get in.
Does the fluid come out milky or like new? If even slightly milky, you
have likely found the problem.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
Guest
Posts: n/a
Re: AX-15 problem
Water contamination?
That tranny does not have a high water vent, just a button vent so if
you get in too deep or splash right water can get in.
Does the fluid come out milky or like new? If even slightly milky, you
have likely found the problem.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
That tranny does not have a high water vent, just a button vent so if
you get in too deep or splash right water can get in.
Does the fluid come out milky or like new? If even slightly milky, you
have likely found the problem.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ufatbastehd wrote:
>
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
Guest
Posts: n/a
Re: AX-15 problem
You are describing a problem with the Clutch Master Cylinder.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1109880663.290201.168820@o13g2000cwo.googlegr oups.com...
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
>
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1109880663.290201.168820@o13g2000cwo.googlegr oups.com...
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
>
Guest
Posts: n/a
Re: AX-15 problem
You are describing a problem with the Clutch Master Cylinder.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1109880663.290201.168820@o13g2000cwo.googlegr oups.com...
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
>
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1109880663.290201.168820@o13g2000cwo.googlegr oups.com...
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
>
Guest
Posts: n/a
Re: AX-15 problem
You are describing a problem with the Clutch Master Cylinder.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1109880663.290201.168820@o13g2000cwo.googlegr oups.com...
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
>
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1109880663.290201.168820@o13g2000cwo.googlegr oups.com...
> My rig every February/March gets nearly impossible to shift into first.
> usually have to double clutch . She also gets very "notchy" into second
> and third.
> I rarely go right into reverse I usually go into second first than over
> to reverse or I might grind.
>
> A couple days ago I could not get it out of reverse until I turned off
> the motor.
>
> Past two years I change the tranny fluid and the problem goes away in a
> couple weeks. Im going to change my tranny fluid again. I always use
> redline.
>
> My ? is what the hells going on? I only put 3,000 , miles on my rig
> every year. No leaking at all.
>
>
> Prior owners receipts show the Clutch, slave cyl changed at 108,000
> miles and flywheel resurfaced as well. Im at 124,700 now.
>
