Aux. Input for Radio
Guest
Posts: n/a
Aux. Input for Radio
Looking for a way to install an AUX. Input into the Stock radio of a 97
TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
crap)
Can it be done?
What type of toggle would I need?
Do I have to get the toggle from the dealership, or would a parts store
have it??
Can it only be done with an aftermarket deck?
TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
crap)
Can it be done?
What type of toggle would I need?
Do I have to get the toggle from the dealership, or would a parts store
have it??
Can it only be done with an aftermarket deck?
Guest
Posts: n/a
Re: Aux. Input for Radio
Possible but not worth doing. You would have to rip the radio apart and
find where the tuner output is connected to the amplifier. It is probably
part of a printed circuit board too. Then wire in another circuit to feed
both channels of stereo from your AUX device. The good news is that you
don't really need a toggle. A stereo mini-plug serves for this.
Earle
<markdgordon2002@gmail.com> wrote in message
news:1147531521.704300.294280@i39g2000cwa.googlegr oups.com...
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
>
find where the tuner output is connected to the amplifier. It is probably
part of a printed circuit board too. Then wire in another circuit to feed
both channels of stereo from your AUX device. The good news is that you
don't really need a toggle. A stereo mini-plug serves for this.
Earle
<markdgordon2002@gmail.com> wrote in message
news:1147531521.704300.294280@i39g2000cwa.googlegr oups.com...
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
>
Guest
Posts: n/a
Re: Aux. Input for Radio
Possible but not worth doing. You would have to rip the radio apart and
find where the tuner output is connected to the amplifier. It is probably
part of a printed circuit board too. Then wire in another circuit to feed
both channels of stereo from your AUX device. The good news is that you
don't really need a toggle. A stereo mini-plug serves for this.
Earle
<markdgordon2002@gmail.com> wrote in message
news:1147531521.704300.294280@i39g2000cwa.googlegr oups.com...
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
>
find where the tuner output is connected to the amplifier. It is probably
part of a printed circuit board too. Then wire in another circuit to feed
both channels of stereo from your AUX device. The good news is that you
don't really need a toggle. A stereo mini-plug serves for this.
Earle
<markdgordon2002@gmail.com> wrote in message
news:1147531521.704300.294280@i39g2000cwa.googlegr oups.com...
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
>
Guest
Posts: n/a
Re: Aux. Input for Radio
Possible but not worth doing. You would have to rip the radio apart and
find where the tuner output is connected to the amplifier. It is probably
part of a printed circuit board too. Then wire in another circuit to feed
both channels of stereo from your AUX device. The good news is that you
don't really need a toggle. A stereo mini-plug serves for this.
Earle
<markdgordon2002@gmail.com> wrote in message
news:1147531521.704300.294280@i39g2000cwa.googlegr oups.com...
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
>
find where the tuner output is connected to the amplifier. It is probably
part of a printed circuit board too. Then wire in another circuit to feed
both channels of stereo from your AUX device. The good news is that you
don't really need a toggle. A stereo mini-plug serves for this.
Earle
<markdgordon2002@gmail.com> wrote in message
news:1147531521.704300.294280@i39g2000cwa.googlegr oups.com...
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
>
Guest
Posts: n/a
Re: Aux. Input for Radio
You would have to open up the radio and install the electronics for an
input circuit. It can be done, but it is difficult. You basically
would have to re-design the radio.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
"markdgordon2002@gmail.com" wrote:
>
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
input circuit. It can be done, but it is difficult. You basically
would have to re-design the radio.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
"markdgordon2002@gmail.com" wrote:
>
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
Guest
Posts: n/a
Re: Aux. Input for Radio
You would have to open up the radio and install the electronics for an
input circuit. It can be done, but it is difficult. You basically
would have to re-design the radio.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
"markdgordon2002@gmail.com" wrote:
>
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
input circuit. It can be done, but it is difficult. You basically
would have to re-design the radio.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
"markdgordon2002@gmail.com" wrote:
>
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
Guest
Posts: n/a
Re: Aux. Input for Radio
You would have to open up the radio and install the electronics for an
input circuit. It can be done, but it is difficult. You basically
would have to re-design the radio.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
"markdgordon2002@gmail.com" wrote:
>
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
input circuit. It can be done, but it is difficult. You basically
would have to re-design the radio.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
"markdgordon2002@gmail.com" wrote:
>
> Looking for a way to install an AUX. Input into the Stock radio of a 97
> TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> crap)
>
> Can it be done?
> What type of toggle would I need?
> Do I have to get the toggle from the dealership, or would a parts store
> have it??
> Can it only be done with an aftermarket deck?
Guest
Posts: n/a
Re: Aux. Input for Radio
If you have a tape deck, you can buy an adapter that converts a mini
jack to a tape. Works will most MP3, CD, Ipods and laptops.
I have one and it works great.
Carl
Mike Romain wrote:
> You would have to open up the radio and install the electronics for an
> input circuit. It can be done, but it is difficult. You basically
> would have to re-design the radio.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> "markdgordon2002@gmail.com" wrote:
> >
> > Looking for a way to install an AUX. Input into the Stock radio of a 97
> > TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> > crap)
> >
> > Can it be done?
> > What type of toggle would I need?
> > Do I have to get the toggle from the dealership, or would a parts store
> > have it??
> > Can it only be done with an aftermarket deck?
jack to a tape. Works will most MP3, CD, Ipods and laptops.
I have one and it works great.
Carl
Mike Romain wrote:
> You would have to open up the radio and install the electronics for an
> input circuit. It can be done, but it is difficult. You basically
> would have to re-design the radio.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> "markdgordon2002@gmail.com" wrote:
> >
> > Looking for a way to install an AUX. Input into the Stock radio of a 97
> > TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> > crap)
> >
> > Can it be done?
> > What type of toggle would I need?
> > Do I have to get the toggle from the dealership, or would a parts store
> > have it??
> > Can it only be done with an aftermarket deck?
Guest
Posts: n/a
Re: Aux. Input for Radio
If you have a tape deck, you can buy an adapter that converts a mini
jack to a tape. Works will most MP3, CD, Ipods and laptops.
I have one and it works great.
Carl
Mike Romain wrote:
> You would have to open up the radio and install the electronics for an
> input circuit. It can be done, but it is difficult. You basically
> would have to re-design the radio.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> "markdgordon2002@gmail.com" wrote:
> >
> > Looking for a way to install an AUX. Input into the Stock radio of a 97
> > TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> > crap)
> >
> > Can it be done?
> > What type of toggle would I need?
> > Do I have to get the toggle from the dealership, or would a parts store
> > have it??
> > Can it only be done with an aftermarket deck?
jack to a tape. Works will most MP3, CD, Ipods and laptops.
I have one and it works great.
Carl
Mike Romain wrote:
> You would have to open up the radio and install the electronics for an
> input circuit. It can be done, but it is difficult. You basically
> would have to re-design the radio.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> "markdgordon2002@gmail.com" wrote:
> >
> > Looking for a way to install an AUX. Input into the Stock radio of a 97
> > TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> > crap)
> >
> > Can it be done?
> > What type of toggle would I need?
> > Do I have to get the toggle from the dealership, or would a parts store
> > have it??
> > Can it only be done with an aftermarket deck?
Guest
Posts: n/a
Re: Aux. Input for Radio
If you have a tape deck, you can buy an adapter that converts a mini
jack to a tape. Works will most MP3, CD, Ipods and laptops.
I have one and it works great.
Carl
Mike Romain wrote:
> You would have to open up the radio and install the electronics for an
> input circuit. It can be done, but it is difficult. You basically
> would have to re-design the radio.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> "markdgordon2002@gmail.com" wrote:
> >
> > Looking for a way to install an AUX. Input into the Stock radio of a 97
> > TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> > crap)
> >
> > Can it be done?
> > What type of toggle would I need?
> > Do I have to get the toggle from the dealership, or would a parts store
> > have it??
> > Can it only be done with an aftermarket deck?
jack to a tape. Works will most MP3, CD, Ipods and laptops.
I have one and it works great.
Carl
Mike Romain wrote:
> You would have to open up the radio and install the electronics for an
> input circuit. It can be done, but it is difficult. You basically
> would have to re-design the radio.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
>
> "markdgordon2002@gmail.com" wrote:
> >
> > Looking for a way to install an AUX. Input into the Stock radio of a 97
> > TJ Wrangler. No, I don't want to use a FM modulator. (Cheesy, piece of
> > crap)
> >
> > Can it be done?
> > What type of toggle would I need?
> > Do I have to get the toggle from the dealership, or would a parts store
> > have it??
> > Can it only be done with an aftermarket deck?
