Aussie Locker?
#11
Guest
Posts: n/a
Re: Aussie Locker?
I ordered two of these things last week, direct from the website for $199
each. I will be putting them in my Dana 30 in the YJ, and the other in the
Dana 44 that I am building for it. I have read good things about them, and
look forward to working them over. I will post feedback when I have some.
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC05158.94BD918A@***.net...
> Well it looks like it'll hold up to size 32" tires:
> http://www.off-road.com/jeep/cheroke...ears/gear.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > These are plenty strong Bill. I have one of these in my S10 which has a
400+
> > horse 350 in it. The rear is a 9" Ford. I have pounded on it for 4 years
and
> > it has been perfect.
> >
> > Chris
each. I will be putting them in my Dana 30 in the YJ, and the other in the
Dana 44 that I am building for it. I have read good things about them, and
look forward to working them over. I will post feedback when I have some.
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC05158.94BD918A@***.net...
> Well it looks like it'll hold up to size 32" tires:
> http://www.off-road.com/jeep/cheroke...ears/gear.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > These are plenty strong Bill. I have one of these in my S10 which has a
400+
> > horse 350 in it. The rear is a 9" Ford. I have pounded on it for 4 years
and
> > it has been perfect.
> >
> > Chris
#12
Guest
Posts: n/a
Re: Aussie Locker?
I ordered two of these things last week, direct from the website for $199
each. I will be putting them in my Dana 30 in the YJ, and the other in the
Dana 44 that I am building for it. I have read good things about them, and
look forward to working them over. I will post feedback when I have some.
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC05158.94BD918A@***.net...
> Well it looks like it'll hold up to size 32" tires:
> http://www.off-road.com/jeep/cheroke...ears/gear.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > These are plenty strong Bill. I have one of these in my S10 which has a
400+
> > horse 350 in it. The rear is a 9" Ford. I have pounded on it for 4 years
and
> > it has been perfect.
> >
> > Chris
each. I will be putting them in my Dana 30 in the YJ, and the other in the
Dana 44 that I am building for it. I have read good things about them, and
look forward to working them over. I will post feedback when I have some.
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC05158.94BD918A@***.net...
> Well it looks like it'll hold up to size 32" tires:
> http://www.off-road.com/jeep/cheroke...ears/gear.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > These are plenty strong Bill. I have one of these in my S10 which has a
400+
> > horse 350 in it. The rear is a 9" Ford. I have pounded on it for 4 years
and
> > it has been perfect.
> >
> > Chris
#13
Guest
Posts: n/a
Re: Aussie Locker?
I ordered two of these things last week, direct from the website for $199
each. I will be putting them in my Dana 30 in the YJ, and the other in the
Dana 44 that I am building for it. I have read good things about them, and
look forward to working them over. I will post feedback when I have some.
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC05158.94BD918A@***.net...
> Well it looks like it'll hold up to size 32" tires:
> http://www.off-road.com/jeep/cheroke...ears/gear.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > These are plenty strong Bill. I have one of these in my S10 which has a
400+
> > horse 350 in it. The rear is a 9" Ford. I have pounded on it for 4 years
and
> > it has been perfect.
> >
> > Chris
each. I will be putting them in my Dana 30 in the YJ, and the other in the
Dana 44 that I am building for it. I have read good things about them, and
look forward to working them over. I will post feedback when I have some.
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC05158.94BD918A@***.net...
> Well it looks like it'll hold up to size 32" tires:
> http://www.off-road.com/jeep/cheroke...ears/gear.html
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > These are plenty strong Bill. I have one of these in my S10 which has a
400+
> > horse 350 in it. The rear is a 9" Ford. I have pounded on it for 4 years
and
> > it has been perfect.
> >
> > Chris
#14
Guest
Posts: n/a
Re: Aussie Locker?
http://www.----------.com/EZLocker.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jerry Newton wrote:
>
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
> Jerry
God Bless America, ßill O|||||||O
mailto:--------------------
Jerry Newton wrote:
>
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
> Jerry
#15
Guest
Posts: n/a
Re: Aussie Locker?
http://www.----------.com/EZLocker.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jerry Newton wrote:
>
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
> Jerry
God Bless America, ßill O|||||||O
mailto:--------------------
Jerry Newton wrote:
>
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
> Jerry
#16
Guest
Posts: n/a
Re: Aussie Locker?
http://www.----------.com/EZLocker.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Jerry Newton wrote:
>
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
> Jerry
God Bless America, ßill O|||||||O
mailto:--------------------
Jerry Newton wrote:
>
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
> Jerry
#17
Guest
Posts: n/a
Re: Aussie Locker?
I just got a look at that pic, Bill, sorry I didn't see it sooner. I don't
think that there was a failure of the locking unit, it looks more like there
was an incorrect length axle shaft installed. Why did the splines strip
halfway up?
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC1AB39.5189831A@***.net...
> http://www.----------.com/EZLocker.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jerry Newton wrote:
> >
> > I ordered two of these things last week, direct from the website for
$199
> > each. I will be putting them in my Dana 30 in the YJ, and the other in
the
> > Dana 44 that I am building for it. I have read good things about them,
and
> > look forward to working them over. I will post feedback when I have
some.
> >
> > Jerry
think that there was a failure of the locking unit, it looks more like there
was an incorrect length axle shaft installed. Why did the splines strip
halfway up?
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC1AB39.5189831A@***.net...
> http://www.----------.com/EZLocker.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jerry Newton wrote:
> >
> > I ordered two of these things last week, direct from the website for
$199
> > each. I will be putting them in my Dana 30 in the YJ, and the other in
the
> > Dana 44 that I am building for it. I have read good things about them,
and
> > look forward to working them over. I will post feedback when I have
some.
> >
> > Jerry
#18
Guest
Posts: n/a
Re: Aussie Locker?
I just got a look at that pic, Bill, sorry I didn't see it sooner. I don't
think that there was a failure of the locking unit, it looks more like there
was an incorrect length axle shaft installed. Why did the splines strip
halfway up?
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC1AB39.5189831A@***.net...
> http://www.----------.com/EZLocker.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jerry Newton wrote:
> >
> > I ordered two of these things last week, direct from the website for
$199
> > each. I will be putting them in my Dana 30 in the YJ, and the other in
the
> > Dana 44 that I am building for it. I have read good things about them,
and
> > look forward to working them over. I will post feedback when I have
some.
> >
> > Jerry
think that there was a failure of the locking unit, it looks more like there
was an incorrect length axle shaft installed. Why did the splines strip
halfway up?
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC1AB39.5189831A@***.net...
> http://www.----------.com/EZLocker.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jerry Newton wrote:
> >
> > I ordered two of these things last week, direct from the website for
$199
> > each. I will be putting them in my Dana 30 in the YJ, and the other in
the
> > Dana 44 that I am building for it. I have read good things about them,
and
> > look forward to working them over. I will post feedback when I have
some.
> >
> > Jerry
#19
Guest
Posts: n/a
Re: Aussie Locker?
I just got a look at that pic, Bill, sorry I didn't see it sooner. I don't
think that there was a failure of the locking unit, it looks more like there
was an incorrect length axle shaft installed. Why did the splines strip
halfway up?
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC1AB39.5189831A@***.net...
> http://www.----------.com/EZLocker.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jerry Newton wrote:
> >
> > I ordered two of these things last week, direct from the website for
$199
> > each. I will be putting them in my Dana 30 in the YJ, and the other in
the
> > Dana 44 that I am building for it. I have read good things about them,
and
> > look forward to working them over. I will post feedback when I have
some.
> >
> > Jerry
think that there was a failure of the locking unit, it looks more like there
was an incorrect length axle shaft installed. Why did the splines strip
halfway up?
Jerry
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FC1AB39.5189831A@***.net...
> http://www.----------.com/EZLocker.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Jerry Newton wrote:
> >
> > I ordered two of these things last week, direct from the website for
$199
> > each. I will be putting them in my Dana 30 in the YJ, and the other in
the
> > Dana 44 that I am building for it. I have read good things about them,
and
> > look forward to working them over. I will post feedback when I have
some.
> >
> > Jerry
#20
Guest
Posts: n/a
Re: Aussie Locker?
So Jerry... have you gotten them in yet? Thoughts? I'm looking for a
locker int he front of my '01 TJ, and this one looks interesting.
"Jerry Newton" <figatmcttelecom.com> wrote in message news:<3fc17af9_1@newspeer2.tds.net>...
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
>
> Jerry
locker int he front of my '01 TJ, and this one looks interesting.
"Jerry Newton" <figatmcttelecom.com> wrote in message news:<3fc17af9_1@newspeer2.tds.net>...
> I ordered two of these things last week, direct from the website for $199
> each. I will be putting them in my Dana 30 in the YJ, and the other in the
> Dana 44 that I am building for it. I have read good things about them, and
> look forward to working them over. I will post feedback when I have some.
>
>
> Jerry