anyone read this?? true? untrue?
#11
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
Pi-eyed Piper did pass the time by typing:
> http://pesn.com/2005/03/17/6900069_Acetone/
I would be very skeptical. Remember Acetone is a solvent
and many rubber/poly parts in the fuel system are only
designed to resist gasoline and known additives. Some additives
can dissolve the seals. This is especially true for carbureted
vehicles. A few bucks saved on a fillup might cost you a thousand
in repairs.
Acetone will decrease the octane rating and can lead to detonation
in high compression engines. It's also more volatile than gasoline
and will evaporate, get sucked into the canister system and be burned
off.
That and any of it gets on your plastic body parts or paint and
it's buh buy paint. Acetone is also known as paint solvent and is
great for removing road tar from chrome bumpers and knocking down
oils before painting bare metal.
--
DougW
> http://pesn.com/2005/03/17/6900069_Acetone/
I would be very skeptical. Remember Acetone is a solvent
and many rubber/poly parts in the fuel system are only
designed to resist gasoline and known additives. Some additives
can dissolve the seals. This is especially true for carbureted
vehicles. A few bucks saved on a fillup might cost you a thousand
in repairs.
Acetone will decrease the octane rating and can lead to detonation
in high compression engines. It's also more volatile than gasoline
and will evaporate, get sucked into the canister system and be burned
off.
That and any of it gets on your plastic body parts or paint and
it's buh buy paint. Acetone is also known as paint solvent and is
great for removing road tar from chrome bumpers and knocking down
oils before painting bare metal.
--
DougW
#12
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
Pi-eyed Piper did pass the time by typing:
> http://pesn.com/2005/03/17/6900069_Acetone/
I would be very skeptical. Remember Acetone is a solvent
and many rubber/poly parts in the fuel system are only
designed to resist gasoline and known additives. Some additives
can dissolve the seals. This is especially true for carbureted
vehicles. A few bucks saved on a fillup might cost you a thousand
in repairs.
Acetone will decrease the octane rating and can lead to detonation
in high compression engines. It's also more volatile than gasoline
and will evaporate, get sucked into the canister system and be burned
off.
That and any of it gets on your plastic body parts or paint and
it's buh buy paint. Acetone is also known as paint solvent and is
great for removing road tar from chrome bumpers and knocking down
oils before painting bare metal.
--
DougW
> http://pesn.com/2005/03/17/6900069_Acetone/
I would be very skeptical. Remember Acetone is a solvent
and many rubber/poly parts in the fuel system are only
designed to resist gasoline and known additives. Some additives
can dissolve the seals. This is especially true for carbureted
vehicles. A few bucks saved on a fillup might cost you a thousand
in repairs.
Acetone will decrease the octane rating and can lead to detonation
in high compression engines. It's also more volatile than gasoline
and will evaporate, get sucked into the canister system and be burned
off.
That and any of it gets on your plastic body parts or paint and
it's buh buy paint. Acetone is also known as paint solvent and is
great for removing road tar from chrome bumpers and knocking down
oils before painting bare metal.
--
DougW
#13
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
Pi-eyed Piper did pass the time by typing:
> http://pesn.com/2005/03/17/6900069_Acetone/
I would be very skeptical. Remember Acetone is a solvent
and many rubber/poly parts in the fuel system are only
designed to resist gasoline and known additives. Some additives
can dissolve the seals. This is especially true for carbureted
vehicles. A few bucks saved on a fillup might cost you a thousand
in repairs.
Acetone will decrease the octane rating and can lead to detonation
in high compression engines. It's also more volatile than gasoline
and will evaporate, get sucked into the canister system and be burned
off.
That and any of it gets on your plastic body parts or paint and
it's buh buy paint. Acetone is also known as paint solvent and is
great for removing road tar from chrome bumpers and knocking down
oils before painting bare metal.
--
DougW
> http://pesn.com/2005/03/17/6900069_Acetone/
I would be very skeptical. Remember Acetone is a solvent
and many rubber/poly parts in the fuel system are only
designed to resist gasoline and known additives. Some additives
can dissolve the seals. This is especially true for carbureted
vehicles. A few bucks saved on a fillup might cost you a thousand
in repairs.
Acetone will decrease the octane rating and can lead to detonation
in high compression engines. It's also more volatile than gasoline
and will evaporate, get sucked into the canister system and be burned
off.
That and any of it gets on your plastic body parts or paint and
it's buh buy paint. Acetone is also known as paint solvent and is
great for removing road tar from chrome bumpers and knocking down
oils before painting bare metal.
--
DougW
#14
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
Did you add in road taxes, and what the new supply and demand cost
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
#15
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
Did you add in road taxes, and what the new supply and demand cost
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
#16
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
Did you add in road taxes, and what the new supply and demand cost
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
#17
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
Did you add in road taxes, and what the new supply and demand cost
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
would be?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
B a r r y wrote:
>
> I can buy acetone at retail US paint stores for about $5 a gallon. That
> puts the wholesale cost at $2.50-$3 a gallon for the store. I wonder
> what 50,000 gallons in bulk would cost?
>
> Barry
#18
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
I have used this chemical Acetone Lab grade in air sample analysis, using a
microscope. Sample prep using this chemical, it burns quite slow and very
clean. You can put it on a flat surface light it on fire and after burning
out no residue is left, so it might be true.
-Brian
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯ )_)
"Pi-eyed Piper" <no@way.com> wrote in message
news:6BD6e.17836$yV3.16220@clgrps12...
> http://pesn.com/2005/03/17/6900069_Acetone/
>
>
microscope. Sample prep using this chemical, it burns quite slow and very
clean. You can put it on a flat surface light it on fire and after burning
out no residue is left, so it might be true.
-Brian
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯ )_)
"Pi-eyed Piper" <no@way.com> wrote in message
news:6BD6e.17836$yV3.16220@clgrps12...
> http://pesn.com/2005/03/17/6900069_Acetone/
>
>
#19
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
I have used this chemical Acetone Lab grade in air sample analysis, using a
microscope. Sample prep using this chemical, it burns quite slow and very
clean. You can put it on a flat surface light it on fire and after burning
out no residue is left, so it might be true.
-Brian
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯ )_)
"Pi-eyed Piper" <no@way.com> wrote in message
news:6BD6e.17836$yV3.16220@clgrps12...
> http://pesn.com/2005/03/17/6900069_Acetone/
>
>
microscope. Sample prep using this chemical, it burns quite slow and very
clean. You can put it on a flat surface light it on fire and after burning
out no residue is left, so it might be true.
-Brian
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯ )_)
"Pi-eyed Piper" <no@way.com> wrote in message
news:6BD6e.17836$yV3.16220@clgrps12...
> http://pesn.com/2005/03/17/6900069_Acetone/
>
>
#20
Guest
Posts: n/a
Re: anyone read this?? true? untrue?
I have used this chemical Acetone Lab grade in air sample analysis, using a
microscope. Sample prep using this chemical, it burns quite slow and very
clean. You can put it on a flat surface light it on fire and after burning
out no residue is left, so it might be true.
-Brian
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯ )_)
"Pi-eyed Piper" <no@way.com> wrote in message
news:6BD6e.17836$yV3.16220@clgrps12...
> http://pesn.com/2005/03/17/6900069_Acetone/
>
>
microscope. Sample prep using this chemical, it burns quite slow and very
clean. You can put it on a flat surface light it on fire and after burning
out no residue is left, so it might be true.
-Brian
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯ )_)
"Pi-eyed Piper" <no@way.com> wrote in message
news:6BD6e.17836$yV3.16220@clgrps12...
> http://pesn.com/2005/03/17/6900069_Acetone/
>
>