On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
in rec.autos.makers.jeep+******, posted by "DougW"
<post.replies@invalid.address>:

>http://www.permatex.com/auto/autouh....&item_no=51813
>http://tinyurl.com/yta2v
>
>Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>has this stuff. Just wondering if anyone has used it and what the experience
>was. Last thing I need is another gootube on my garage wall. :)

I've used the Permatex Ultra Grey silicone to do my
differentials, and their Hypolar HPF to seal the combo tank
on a Stihl chainsaw I stripped and rebuilt. Both worked
great.

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov

 

Bob Casanova did pass the time by typing:
> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
> in rec.autos.makers.jeep+******, posted by "DougW"
> <post.replies@invalid.address>:
>
>> http://www.permatex.com/auto/autouh....&item_no=51813
>> http://tinyurl.com/yta2v
>>
>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>> has this stuff. Just wondering if anyone has used it and what the experience
>> was. Last thing I need is another gootube on my garage wall. :)
>
> I've used the Permatex Ultra Grey silicone to do my
> differentials, and their Hypolar HPF to seal the combo tank
> on a Stihl chainsaw I stripped and rebuilt. Both worked
> great.

Yep, I have that Hylomar HPF stuff here, problem is it's not good
for machined surfaces. Works well with pressed metal like
tranny and oil pans though.

--
DougW

 

Bob Casanova did pass the time by typing:
> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
> in rec.autos.makers.jeep+******, posted by "DougW"
> <post.replies@invalid.address>:
>
>> http://www.permatex.com/auto/autouh....&item_no=51813
>> http://tinyurl.com/yta2v
>>
>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>> has this stuff. Just wondering if anyone has used it and what the experience
>> was. Last thing I need is another gootube on my garage wall. :)
>
> I've used the Permatex Ultra Grey silicone to do my
> differentials, and their Hypolar HPF to seal the combo tank
> on a Stihl chainsaw I stripped and rebuilt. Both worked
> great.

Yep, I have that Hylomar HPF stuff here, problem is it's not good
for machined surfaces. Works well with pressed metal like
tranny and oil pans though.

--
DougW

 

Bob Casanova did pass the time by typing:
> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
> in rec.autos.makers.jeep+******, posted by "DougW"
> <post.replies@invalid.address>:
>
>> http://www.permatex.com/auto/autouh....&item_no=51813
>> http://tinyurl.com/yta2v
>>
>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>> has this stuff. Just wondering if anyone has used it and what the experience
>> was. Last thing I need is another gootube on my garage wall. :)
>
> I've used the Permatex Ultra Grey silicone to do my
> differentials, and their Hypolar HPF to seal the combo tank
> on a Stihl chainsaw I stripped and rebuilt. Both worked
> great.

Yep, I have that Hylomar HPF stuff here, problem is it's not good
for machined surfaces. Works well with pressed metal like
tranny and oil pans though.

--
DougW

 

Bob Casanova did pass the time by typing:
> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
> in rec.autos.makers.jeep+******, posted by "DougW"
> <post.replies@invalid.address>:
>
>> http://www.permatex.com/auto/autouh....&item_no=51813
>> http://tinyurl.com/yta2v
>>
>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>> has this stuff. Just wondering if anyone has used it and what the experience
>> was. Last thing I need is another gootube on my garage wall. :)
>
> I've used the Permatex Ultra Grey silicone to do my
> differentials, and their Hypolar HPF to seal the combo tank
> on a Stihl chainsaw I stripped and rebuilt. Both worked
> great.

Yep, I have that Hylomar HPF stuff here, problem is it's not good
for machined surfaces. Works well with pressed metal like
tranny and oil pans though.

--
DougW

 

On Fri, 16 Apr 2004 23:22:07 -0500, the following appeared
in rec.autos.makers.jeep+******, posted by "DougW"
<post.replies@invalid.address>:

>Bob Casanova did pass the time by typing:
>> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
>> in rec.autos.makers.jeep+******, posted by "DougW"
>> <post.replies@invalid.address>:
>>
>>> http://www.permatex.com/auto/autouh....&item_no=51813
>>> http://tinyurl.com/yta2v
>>>
>>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>>> has this stuff. Just wondering if anyone has used it and what the experience
>>> was. Last thing I need is another gootube on my garage wall. :)
>>
>> I've used the Permatex Ultra Grey silicone to do my
>> differentials, and their Hypolar HPF to seal the combo tank
>> on a Stihl chainsaw I stripped and rebuilt. Both worked
>> great.
>
>Yep, I have that Hylomar HPF stuff here, problem is it's not good
>for machined surfaces. Works well with pressed metal like
>tranny and oil pans though.

Well, the mating surfaces on the chainsaw are machined and
it seems to be working fine; no leaks to the outside or
between the tanks, anyway. Of course, there's effectively
zero pressure differential, so maybe that explains it. I
used it because it's rated for fuel contact.

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov

 

On Fri, 16 Apr 2004 23:22:07 -0500, the following appeared
in rec.autos.makers.jeep+******, posted by "DougW"
<post.replies@invalid.address>:

>Bob Casanova did pass the time by typing:
>> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
>> in rec.autos.makers.jeep+******, posted by "DougW"
>> <post.replies@invalid.address>:
>>
>>> http://www.permatex.com/auto/autouh....&item_no=51813
>>> http://tinyurl.com/yta2v
>>>
>>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>>> has this stuff. Just wondering if anyone has used it and what the experience
>>> was. Last thing I need is another gootube on my garage wall. :)
>>
>> I've used the Permatex Ultra Grey silicone to do my
>> differentials, and their Hypolar HPF to seal the combo tank
>> on a Stihl chainsaw I stripped and rebuilt. Both worked
>> great.
>
>Yep, I have that Hylomar HPF stuff here, problem is it's not good
>for machined surfaces. Works well with pressed metal like
>tranny and oil pans though.

Well, the mating surfaces on the chainsaw are machined and
it seems to be working fine; no leaks to the outside or
between the tanks, anyway. Of course, there's effectively
zero pressure differential, so maybe that explains it. I
used it because it's rated for fuel contact.

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov

 

On Fri, 16 Apr 2004 23:22:07 -0500, the following appeared
in rec.autos.makers.jeep+******, posted by "DougW"
<post.replies@invalid.address>:

>Bob Casanova did pass the time by typing:
>> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
>> in rec.autos.makers.jeep+******, posted by "DougW"
>> <post.replies@invalid.address>:
>>
>>> http://www.permatex.com/auto/autouh....&item_no=51813
>>> http://tinyurl.com/yta2v
>>>
>>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>>> has this stuff. Just wondering if anyone has used it and what the experience
>>> was. Last thing I need is another gootube on my garage wall. :)
>>
>> I've used the Permatex Ultra Grey silicone to do my
>> differentials, and their Hypolar HPF to seal the combo tank
>> on a Stihl chainsaw I stripped and rebuilt. Both worked
>> great.
>
>Yep, I have that Hylomar HPF stuff here, problem is it's not good
>for machined surfaces. Works well with pressed metal like
>tranny and oil pans though.

Well, the mating surfaces on the chainsaw are machined and
it seems to be working fine; no leaks to the outside or
between the tanks, anyway. Of course, there's effectively
zero pressure differential, so maybe that explains it. I
used it because it's rated for fuel contact.

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov

 

On Fri, 16 Apr 2004 23:22:07 -0500, the following appeared
in rec.autos.makers.jeep+******, posted by "DougW"
<post.replies@invalid.address>:

>Bob Casanova did pass the time by typing:
>> On Thu, 15 Apr 2004 21:05:42 -0500, the following appeared
>> in rec.autos.makers.jeep+******, posted by "DougW"
>> <post.replies@invalid.address>:
>>
>>> http://www.permatex.com/auto/autouh....&item_no=51813
>>> http://tinyurl.com/yta2v
>>>
>>> Permatex anaerobic gasket maker. I can't find loctite 515 locally but NAPA
>>> has this stuff. Just wondering if anyone has used it and what the experience
>>> was. Last thing I need is another gootube on my garage wall. :)
>>
>> I've used the Permatex Ultra Grey silicone to do my
>> differentials, and their Hypolar HPF to seal the combo tank
>> on a Stihl chainsaw I stripped and rebuilt. Both worked
>> great.
>
>Yep, I have that Hylomar HPF stuff here, problem is it's not good
>for machined surfaces. Works well with pressed metal like
>tranny and oil pans though.

Well, the mating surfaces on the chainsaw are machined and
it seems to be working fine; no leaks to the outside or
between the tanks, anyway. Of course, there's effectively
zero pressure differential, so maybe that explains it. I
used it because it's rated for fuel contact.

--

Bob C.

Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)

"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov