Anybody run a header on the 2.5l 4cyl?
04-01-2005, 10:00 AM
#1
Guest
Posts: n/a
Anybody run a header on the 2.5l 4cyl?
Does anyone run or have you run in the past, a header on your 4 cylinder? I have a YJ with the infamous cracked exhaust manifold and I am debating between welding the crack to save some cash or just replacing the whole damned thing with one of those nice stainless Banks headers. Either way it has to come off. Any input?
Luke
Luke
04-01-2005, 10:13 AM
#2
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of the
block breaks. You have to drill it out and put a new one in...
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jnmn$kjc$1@home.itg.ti.com...
Does anyone run or have you run in the past, a header on your 4 cylinder? I
have a YJ with the infamous cracked exhaust manifold and I am debating
between welding the crack to save some cash or just replacing the whole
damned thing with one of those nice stainless Banks headers. Either way it
has to come off. Any input?
Luke
block breaks. You have to drill it out and put a new one in...
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jnmn$kjc$1@home.itg.ti.com...
Does anyone run or have you run in the past, a header on your 4 cylinder? I
have a YJ with the infamous cracked exhaust manifold and I am debating
between welding the crack to save some cash or just replacing the whole
damned thing with one of those nice stainless Banks headers. Either way it
has to come off. Any input?
Luke
04-01-2005, 10:13 AM
#3
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of the
block breaks. You have to drill it out and put a new one in...
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jnmn$kjc$1@home.itg.ti.com...
Does anyone run or have you run in the past, a header on your 4 cylinder? I
have a YJ with the infamous cracked exhaust manifold and I am debating
between welding the crack to save some cash or just replacing the whole
damned thing with one of those nice stainless Banks headers. Either way it
has to come off. Any input?
Luke
block breaks. You have to drill it out and put a new one in...
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jnmn$kjc$1@home.itg.ti.com...
Does anyone run or have you run in the past, a header on your 4 cylinder? I
have a YJ with the infamous cracked exhaust manifold and I am debating
between welding the crack to save some cash or just replacing the whole
damned thing with one of those nice stainless Banks headers. Either way it
has to come off. Any input?
Luke
04-01-2005, 10:13 AM
#4
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of the
block breaks. You have to drill it out and put a new one in...
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jnmn$kjc$1@home.itg.ti.com...
Does anyone run or have you run in the past, a header on your 4 cylinder? I
have a YJ with the infamous cracked exhaust manifold and I am debating
between welding the crack to save some cash or just replacing the whole
damned thing with one of those nice stainless Banks headers. Either way it
has to come off. Any input?
Luke
block breaks. You have to drill it out and put a new one in...
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jnmn$kjc$1@home.itg.ti.com...
Does anyone run or have you run in the past, a header on your 4 cylinder? I
have a YJ with the infamous cracked exhaust manifold and I am debating
between welding the crack to save some cash or just replacing the whole
damned thing with one of those nice stainless Banks headers. Either way it
has to come off. Any input?
Luke
04-01-2005, 10:24 AM
#5
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
The manifold is cracked without a doubt. I can see and of course hear it
hissing loudly, and I can smell it stinking up the cab when I drive.
"IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
the
> block breaks. You have to drill it out and put a new one in...
>
>
> "Luke" <L-najacht1@ti.com> wrote in message
> news:d2jnmn$kjc$1@home.itg.ti.com...
> Does anyone run or have you run in the past, a header on your 4 cylinder?
I
> have a YJ with the infamous cracked exhaust manifold and I am debating
> between welding the crack to save some cash or just replacing the whole
> damned thing with one of those nice stainless Banks headers. Either way it
> has to come off. Any input?
>
> Luke
>
>
hissing loudly, and I can smell it stinking up the cab when I drive.
"IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
the
> block breaks. You have to drill it out and put a new one in...
>
>
> "Luke" <L-najacht1@ti.com> wrote in message
> news:d2jnmn$kjc$1@home.itg.ti.com...
> Does anyone run or have you run in the past, a header on your 4 cylinder?
I
> have a YJ with the infamous cracked exhaust manifold and I am debating
> between welding the crack to save some cash or just replacing the whole
> damned thing with one of those nice stainless Banks headers. Either way it
> has to come off. Any input?
>
> Luke
>
>
04-01-2005, 10:24 AM
#6
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
The manifold is cracked without a doubt. I can see and of course hear it
hissing loudly, and I can smell it stinking up the cab when I drive.
"IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
the
> block breaks. You have to drill it out and put a new one in...
>
>
> "Luke" <L-najacht1@ti.com> wrote in message
> news:d2jnmn$kjc$1@home.itg.ti.com...
> Does anyone run or have you run in the past, a header on your 4 cylinder?
I
> have a YJ with the infamous cracked exhaust manifold and I am debating
> between welding the crack to save some cash or just replacing the whole
> damned thing with one of those nice stainless Banks headers. Either way it
> has to come off. Any input?
>
> Luke
>
>
hissing loudly, and I can smell it stinking up the cab when I drive.
"IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
the
> block breaks. You have to drill it out and put a new one in...
>
>
> "Luke" <L-najacht1@ti.com> wrote in message
> news:d2jnmn$kjc$1@home.itg.ti.com...
> Does anyone run or have you run in the past, a header on your 4 cylinder?
I
> have a YJ with the infamous cracked exhaust manifold and I am debating
> between welding the crack to save some cash or just replacing the whole
> damned thing with one of those nice stainless Banks headers. Either way it
> has to come off. Any input?
>
> Luke
>
>
04-01-2005, 10:24 AM
#7
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
The manifold is cracked without a doubt. I can see and of course hear it
hissing loudly, and I can smell it stinking up the cab when I drive.
"IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
the
> block breaks. You have to drill it out and put a new one in...
>
>
> "Luke" <L-najacht1@ti.com> wrote in message
> news:d2jnmn$kjc$1@home.itg.ti.com...
> Does anyone run or have you run in the past, a header on your 4 cylinder?
I
> have a YJ with the infamous cracked exhaust manifold and I am debating
> between welding the crack to save some cash or just replacing the whole
> damned thing with one of those nice stainless Banks headers. Either way it
> has to come off. Any input?
>
> Luke
>
>
hissing loudly, and I can smell it stinking up the cab when I drive.
"IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
the
> block breaks. You have to drill it out and put a new one in...
>
>
> "Luke" <L-najacht1@ti.com> wrote in message
> news:d2jnmn$kjc$1@home.itg.ti.com...
> Does anyone run or have you run in the past, a header on your 4 cylinder?
I
> have a YJ with the infamous cracked exhaust manifold and I am debating
> between welding the crack to save some cash or just replacing the whole
> damned thing with one of those nice stainless Banks headers. Either way it
> has to come off. Any input?
>
> Luke
>
>
04-01-2005, 12:33 PM
#8
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
I have had a few welded but sometimes its tuff because the crack is down by
the collecter and its hard to get all they way in there to weld... I dont
know about the banks but I have had a few borlas put on & they have cracked
within a year...what ever thats worth
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jp3e$ldq$1@home.itg.ti.com...
> The manifold is cracked without a doubt. I can see and of course hear it
> hissing loudly, and I can smell it stinking up the cab when I drive.
>
> "IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
> news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> > the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
> the
> > block breaks. You have to drill it out and put a new one in...
> >
> >
> > "Luke" <L-najacht1@ti.com> wrote in message
> > news:d2jnmn$kjc$1@home.itg.ti.com...
> > Does anyone run or have you run in the past, a header on your 4
cylinder?
> I
> > have a YJ with the infamous cracked exhaust manifold and I am debating
> > between welding the crack to save some cash or just replacing the whole
> > damned thing with one of those nice stainless Banks headers. Either way
it
> > has to come off. Any input?
> >
> > Luke
> >
> >
>
>
the collecter and its hard to get all they way in there to weld... I dont
know about the banks but I have had a few borlas put on & they have cracked
within a year...what ever thats worth
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jp3e$ldq$1@home.itg.ti.com...
> The manifold is cracked without a doubt. I can see and of course hear it
> hissing loudly, and I can smell it stinking up the cab when I drive.
>
> "IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
> news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> > the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
> the
> > block breaks. You have to drill it out and put a new one in...
> >
> >
> > "Luke" <L-najacht1@ti.com> wrote in message
> > news:d2jnmn$kjc$1@home.itg.ti.com...
> > Does anyone run or have you run in the past, a header on your 4
cylinder?
> I
> > have a YJ with the infamous cracked exhaust manifold and I am debating
> > between welding the crack to save some cash or just replacing the whole
> > damned thing with one of those nice stainless Banks headers. Either way
it
> > has to come off. Any input?
> >
> > Luke
> >
> >
>
>
04-01-2005, 12:33 PM
#9
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
I have had a few welded but sometimes its tuff because the crack is down by
the collecter and its hard to get all they way in there to weld... I dont
know about the banks but I have had a few borlas put on & they have cracked
within a year...what ever thats worth
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jp3e$ldq$1@home.itg.ti.com...
> The manifold is cracked without a doubt. I can see and of course hear it
> hissing loudly, and I can smell it stinking up the cab when I drive.
>
> "IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
> news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> > the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
> the
> > block breaks. You have to drill it out and put a new one in...
> >
> >
> > "Luke" <L-najacht1@ti.com> wrote in message
> > news:d2jnmn$kjc$1@home.itg.ti.com...
> > Does anyone run or have you run in the past, a header on your 4
cylinder?
> I
> > have a YJ with the infamous cracked exhaust manifold and I am debating
> > between welding the crack to save some cash or just replacing the whole
> > damned thing with one of those nice stainless Banks headers. Either way
it
> > has to come off. Any input?
> >
> > Luke
> >
> >
>
>
the collecter and its hard to get all they way in there to weld... I dont
know about the banks but I have had a few borlas put on & they have cracked
within a year...what ever thats worth
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jp3e$ldq$1@home.itg.ti.com...
> The manifold is cracked without a doubt. I can see and of course hear it
> hissing loudly, and I can smell it stinking up the cab when I drive.
>
> "IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
> news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> > the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
> the
> > block breaks. You have to drill it out and put a new one in...
> >
> >
> > "Luke" <L-najacht1@ti.com> wrote in message
> > news:d2jnmn$kjc$1@home.itg.ti.com...
> > Does anyone run or have you run in the past, a header on your 4
cylinder?
> I
> > have a YJ with the infamous cracked exhaust manifold and I am debating
> > between welding the crack to save some cash or just replacing the whole
> > damned thing with one of those nice stainless Banks headers. Either way
it
> > has to come off. Any input?
> >
> > Luke
> >
> >
>
>
04-01-2005, 12:33 PM
#10
Guest
Posts: n/a
Re: Anybody run a header on the 2.5l 4cyl?
I have had a few welded but sometimes its tuff because the crack is down by
the collecter and its hard to get all they way in there to weld... I dont
know about the banks but I have had a few borlas put on & they have cracked
within a year...what ever thats worth
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jp3e$ldq$1@home.itg.ti.com...
> The manifold is cracked without a doubt. I can see and of course hear it
> hissing loudly, and I can smell it stinking up the cab when I drive.
>
> "IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
> news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> > the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
> the
> > block breaks. You have to drill it out and put a new one in...
> >
> >
> > "Luke" <L-najacht1@ti.com> wrote in message
> > news:d2jnmn$kjc$1@home.itg.ti.com...
> > Does anyone run or have you run in the past, a header on your 4
cylinder?
> I
> > have a YJ with the infamous cracked exhaust manifold and I am debating
> > between welding the crack to save some cash or just replacing the whole
> > damned thing with one of those nice stainless Banks headers. Either way
it
> > has to come off. Any input?
> >
> > Luke
> >
> >
>
>
the collecter and its hard to get all they way in there to weld... I dont
know about the banks but I have had a few borlas put on & they have cracked
within a year...what ever thats worth
"Luke" <L-najacht1@ti.com> wrote in message
news:d2jp3e$ldq$1@home.itg.ti.com...
> The manifold is cracked without a doubt. I can see and of course hear it
> hissing loudly, and I can smell it stinking up the cab when I drive.
>
> "IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
> news:hyd3e.6199$c76.3423@newssvr11.news.prodigy.co m...
> > the 4 cyl manifolds dont crack like the 6 cyl.. the stud at the back of
> the
> > block breaks. You have to drill it out and put a new one in...
> >
> >
> > "Luke" <L-najacht1@ti.com> wrote in message
> > news:d2jnmn$kjc$1@home.itg.ti.com...
> > Does anyone run or have you run in the past, a header on your 4
cylinder?
> I
> > have a YJ with the infamous cracked exhaust manifold and I am debating
> > between welding the crack to save some cash or just replacing the whole
> > damned thing with one of those nice stainless Banks headers. Either way
it
> > has to come off. Any input?
> >
> > Luke
> >
> >
>
>
