Any way to verify a socket's fuse rating?
Guest
Posts: n/a
Any way to verify a socket's fuse rating?
Hello,
I just replaced my factory radio/cassette with a radio/cd player in a 1994
Jeep Cherokee. The problem is the unit doesn't play when the engine is off
and the key is turned to ACCessory (or whatever it is called or the closet
thing to it, I don't have the owner's manual and there aren't any markings
on the keyhole.) I'm pretty sure the cd worked fine in the previous car
when the key was in ACCESSORY) and it works fine when the engine is on in
the Jeep. The unit is getting power when the engine is off. (There is a
little light that blinks when the radio face plate is removed).
Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees and
there is a listing for a 10 amp fuse labeled for ETR radio/power antenna in
the Chilton diagram of the fuse block that looks like the one I have. I
don't have the owner's manual and the fuse block doesn't seem to have a
cover or anything listing what goes where. I have no idea what an ETR
radio is, but google seems to think it stands for 'electronically tunable
radio'. The original factory radio was electronically tunable or digital
tuning at least and worked fine without the fuse (at least the radio did, I
think the cassette is permanently busted). I don't have a power antenna.
I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
ideas before I fubar everything?
oh and to the people who said aftermarket radios are ugly in a previous
thread, yeah it's pretty ugly.
I just replaced my factory radio/cassette with a radio/cd player in a 1994
Jeep Cherokee. The problem is the unit doesn't play when the engine is off
and the key is turned to ACCessory (or whatever it is called or the closet
thing to it, I don't have the owner's manual and there aren't any markings
on the keyhole.) I'm pretty sure the cd worked fine in the previous car
when the key was in ACCESSORY) and it works fine when the engine is on in
the Jeep. The unit is getting power when the engine is off. (There is a
little light that blinks when the radio face plate is removed).
Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees and
there is a listing for a 10 amp fuse labeled for ETR radio/power antenna in
the Chilton diagram of the fuse block that looks like the one I have. I
don't have the owner's manual and the fuse block doesn't seem to have a
cover or anything listing what goes where. I have no idea what an ETR
radio is, but google seems to think it stands for 'electronically tunable
radio'. The original factory radio was electronically tunable or digital
tuning at least and worked fine without the fuse (at least the radio did, I
think the cassette is permanently busted). I don't have a power antenna.
I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
ideas before I fubar everything?
oh and to the people who said aftermarket radios are ugly in a previous
thread, yeah it's pretty ugly.
Guest
Posts: n/a
Re: Any way to verify a socket's fuse rating?
I'm thinking the ETR fuse powers, in addition to the power antenna, the
small amount of juice it takes to keep your radio stations and run the clock
etc. It would be hot all the time..
We recently had a thread running about aftermarket radio wiring SNAFUs so be
careful when replacing the fuse as it may have been taken out for a reason.
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:BLc0g.386$_s5.209@trnddc04...
> Hello,
>
> I just replaced my factory radio/cassette with a radio/cd player in a 1994
> Jeep Cherokee. The problem is the unit doesn't play when the engine is
off
> and the key is turned to ACCessory (or whatever it is called or the closet
> thing to it, I don't have the owner's manual and there aren't any markings
> on the keyhole.) I'm pretty sure the cd worked fine in the previous car
> when the key was in ACCESSORY) and it works fine when the engine is on in
> the Jeep. The unit is getting power when the engine is off. (There is a
> little light that blinks when the radio face plate is removed).
>
> Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees
and
> there is a listing for a 10 amp fuse labeled for ETR radio/power antenna
in
> the Chilton diagram of the fuse block that looks like the one I have. I
> don't have the owner's manual and the fuse block doesn't seem to have a
> cover or anything listing what goes where. I have no idea what an ETR
> radio is, but google seems to think it stands for 'electronically tunable
> radio'. The original factory radio was electronically tunable or digital
> tuning at least and worked fine without the fuse (at least the radio did,
I
> think the cassette is permanently busted). I don't have a power antenna.
> I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
> ideas before I fubar everything?
>
> oh and to the people who said aftermarket radios are ugly in a previous
> thread, yeah it's pretty ugly.
small amount of juice it takes to keep your radio stations and run the clock
etc. It would be hot all the time..
We recently had a thread running about aftermarket radio wiring SNAFUs so be
careful when replacing the fuse as it may have been taken out for a reason.
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:BLc0g.386$_s5.209@trnddc04...
> Hello,
>
> I just replaced my factory radio/cassette with a radio/cd player in a 1994
> Jeep Cherokee. The problem is the unit doesn't play when the engine is
off
> and the key is turned to ACCessory (or whatever it is called or the closet
> thing to it, I don't have the owner's manual and there aren't any markings
> on the keyhole.) I'm pretty sure the cd worked fine in the previous car
> when the key was in ACCESSORY) and it works fine when the engine is on in
> the Jeep. The unit is getting power when the engine is off. (There is a
> little light that blinks when the radio face plate is removed).
>
> Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees
and
> there is a listing for a 10 amp fuse labeled for ETR radio/power antenna
in
> the Chilton diagram of the fuse block that looks like the one I have. I
> don't have the owner's manual and the fuse block doesn't seem to have a
> cover or anything listing what goes where. I have no idea what an ETR
> radio is, but google seems to think it stands for 'electronically tunable
> radio'. The original factory radio was electronically tunable or digital
> tuning at least and worked fine without the fuse (at least the radio did,
I
> think the cassette is permanently busted). I don't have a power antenna.
> I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
> ideas before I fubar everything?
>
> oh and to the people who said aftermarket radios are ugly in a previous
> thread, yeah it's pretty ugly.
Guest
Posts: n/a
Re: Any way to verify a socket's fuse rating?
I'm thinking the ETR fuse powers, in addition to the power antenna, the
small amount of juice it takes to keep your radio stations and run the clock
etc. It would be hot all the time..
We recently had a thread running about aftermarket radio wiring SNAFUs so be
careful when replacing the fuse as it may have been taken out for a reason.
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:BLc0g.386$_s5.209@trnddc04...
> Hello,
>
> I just replaced my factory radio/cassette with a radio/cd player in a 1994
> Jeep Cherokee. The problem is the unit doesn't play when the engine is
off
> and the key is turned to ACCessory (or whatever it is called or the closet
> thing to it, I don't have the owner's manual and there aren't any markings
> on the keyhole.) I'm pretty sure the cd worked fine in the previous car
> when the key was in ACCESSORY) and it works fine when the engine is on in
> the Jeep. The unit is getting power when the engine is off. (There is a
> little light that blinks when the radio face plate is removed).
>
> Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees
and
> there is a listing for a 10 amp fuse labeled for ETR radio/power antenna
in
> the Chilton diagram of the fuse block that looks like the one I have. I
> don't have the owner's manual and the fuse block doesn't seem to have a
> cover or anything listing what goes where. I have no idea what an ETR
> radio is, but google seems to think it stands for 'electronically tunable
> radio'. The original factory radio was electronically tunable or digital
> tuning at least and worked fine without the fuse (at least the radio did,
I
> think the cassette is permanently busted). I don't have a power antenna.
> I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
> ideas before I fubar everything?
>
> oh and to the people who said aftermarket radios are ugly in a previous
> thread, yeah it's pretty ugly.
small amount of juice it takes to keep your radio stations and run the clock
etc. It would be hot all the time..
We recently had a thread running about aftermarket radio wiring SNAFUs so be
careful when replacing the fuse as it may have been taken out for a reason.
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:BLc0g.386$_s5.209@trnddc04...
> Hello,
>
> I just replaced my factory radio/cassette with a radio/cd player in a 1994
> Jeep Cherokee. The problem is the unit doesn't play when the engine is
off
> and the key is turned to ACCessory (or whatever it is called or the closet
> thing to it, I don't have the owner's manual and there aren't any markings
> on the keyhole.) I'm pretty sure the cd worked fine in the previous car
> when the key was in ACCESSORY) and it works fine when the engine is on in
> the Jeep. The unit is getting power when the engine is off. (There is a
> little light that blinks when the radio face plate is removed).
>
> Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees
and
> there is a listing for a 10 amp fuse labeled for ETR radio/power antenna
in
> the Chilton diagram of the fuse block that looks like the one I have. I
> don't have the owner's manual and the fuse block doesn't seem to have a
> cover or anything listing what goes where. I have no idea what an ETR
> radio is, but google seems to think it stands for 'electronically tunable
> radio'. The original factory radio was electronically tunable or digital
> tuning at least and worked fine without the fuse (at least the radio did,
I
> think the cassette is permanently busted). I don't have a power antenna.
> I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
> ideas before I fubar everything?
>
> oh and to the people who said aftermarket radios are ugly in a previous
> thread, yeah it's pretty ugly.
Guest
Posts: n/a
Re: Any way to verify a socket's fuse rating?
I'm thinking the ETR fuse powers, in addition to the power antenna, the
small amount of juice it takes to keep your radio stations and run the clock
etc. It would be hot all the time..
We recently had a thread running about aftermarket radio wiring SNAFUs so be
careful when replacing the fuse as it may have been taken out for a reason.
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:BLc0g.386$_s5.209@trnddc04...
> Hello,
>
> I just replaced my factory radio/cassette with a radio/cd player in a 1994
> Jeep Cherokee. The problem is the unit doesn't play when the engine is
off
> and the key is turned to ACCessory (or whatever it is called or the closet
> thing to it, I don't have the owner's manual and there aren't any markings
> on the keyhole.) I'm pretty sure the cd worked fine in the previous car
> when the key was in ACCESSORY) and it works fine when the engine is on in
> the Jeep. The unit is getting power when the engine is off. (There is a
> little light that blinks when the radio face plate is removed).
>
> Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees
and
> there is a listing for a 10 amp fuse labeled for ETR radio/power antenna
in
> the Chilton diagram of the fuse block that looks like the one I have. I
> don't have the owner's manual and the fuse block doesn't seem to have a
> cover or anything listing what goes where. I have no idea what an ETR
> radio is, but google seems to think it stands for 'electronically tunable
> radio'. The original factory radio was electronically tunable or digital
> tuning at least and worked fine without the fuse (at least the radio did,
I
> think the cassette is permanently busted). I don't have a power antenna.
> I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
> ideas before I fubar everything?
>
> oh and to the people who said aftermarket radios are ugly in a previous
> thread, yeah it's pretty ugly.
small amount of juice it takes to keep your radio stations and run the clock
etc. It would be hot all the time..
We recently had a thread running about aftermarket radio wiring SNAFUs so be
careful when replacing the fuse as it may have been taken out for a reason.
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:BLc0g.386$_s5.209@trnddc04...
> Hello,
>
> I just replaced my factory radio/cassette with a radio/cd player in a 1994
> Jeep Cherokee. The problem is the unit doesn't play when the engine is
off
> and the key is turned to ACCessory (or whatever it is called or the closet
> thing to it, I don't have the owner's manual and there aren't any markings
> on the keyhole.) I'm pretty sure the cd worked fine in the previous car
> when the key was in ACCESSORY) and it works fine when the engine is on in
> the Jeep. The unit is getting power when the engine is off. (There is a
> little light that blinks when the radio face plate is removed).
>
> Anyway, I looked up a fuse chart in a CHILTON manual for 1994 Cherokees
and
> there is a listing for a 10 amp fuse labeled for ETR radio/power antenna
in
> the Chilton diagram of the fuse block that looks like the one I have. I
> don't have the owner's manual and the fuse block doesn't seem to have a
> cover or anything listing what goes where. I have no idea what an ETR
> radio is, but google seems to think it stands for 'electronically tunable
> radio'. The original factory radio was electronically tunable or digital
> tuning at least and worked fine without the fuse (at least the radio did,
I
> think the cassette is permanently busted). I don't have a power antenna.
> I'm about to stick a 10 amp fuse in there to see if I can get to work. Any
> ideas before I fubar everything?
>
> oh and to the people who said aftermarket radios are ugly in a previous
> thread, yeah it's pretty ugly.
Guest
Posts: n/a
aargh, stereo won't play unless engine is running (was: Any way to verify a socket's fuse rating?)
arrgh the fuse location I mentioned doesn't appear to be connected to
anything (it only has one metal contact, the other side is empty plastic)
I'll try to find that thread you are talking about.
"billy ray" <billy_ray@SPAMfuse.net> wrote in
news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
> I'm thinking the ETR fuse powers, in addition to the power antenna,
> the small amount of juice it takes to keep your radio stations and run
> the clock etc. It would be hot all the time..
>
> We recently had a thread running about aftermarket radio wiring SNAFUs
> so be careful when replacing the fuse as it may have been taken out
> for a reason.
>
> "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> news:BLc0g.386$_s5.209@trnddc04...
>> Hello,
>>
>> I just replaced my factory radio/cassette with a radio/cd player in a
>> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
>> engine is off and the key is turned to ACCessory (or whatever it is
>> called or the closet thing to it, I don't have the owner's manual and
>> there aren't any markings on the keyhole.) I'm pretty sure the cd
>> worked fine in the previous car when the key was in ACCESSORY) and it
>> works fine when the engine is on in the Jeep. The unit is getting
>> power when the engine is off. (There is a little light that blinks
>> when the radio face plate is removed).
>>
>> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
>> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
>> radio/power antenna in the Chilton diagram of the fuse block that
>> looks like the one I have. I don't have the owner's manual and the
>> fuse block doesn't seem to have a cover or anything listing what goes
>> where. I have no idea what an ETR radio is, but google seems to
>> think it stands for 'electronically tunable radio'. The original
>> factory radio was electronically tunable or digital tuning at least
>> and worked fine without the fuse (at least the radio did, I think the
>> cassette is permanently busted). I don't have a power antenna. I'm
>> about to stick a 10 amp fuse in there to see if I can get to work.
>> Any ideas before I fubar everything?
>>
>> oh and to the people who said aftermarket radios are ugly in a
>> previous thread, yeah it's pretty ugly.
>
>
>
anything (it only has one metal contact, the other side is empty plastic)
I'll try to find that thread you are talking about.
"billy ray" <billy_ray@SPAMfuse.net> wrote in
news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
> I'm thinking the ETR fuse powers, in addition to the power antenna,
> the small amount of juice it takes to keep your radio stations and run
> the clock etc. It would be hot all the time..
>
> We recently had a thread running about aftermarket radio wiring SNAFUs
> so be careful when replacing the fuse as it may have been taken out
> for a reason.
>
> "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> news:BLc0g.386$_s5.209@trnddc04...
>> Hello,
>>
>> I just replaced my factory radio/cassette with a radio/cd player in a
>> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
>> engine is off and the key is turned to ACCessory (or whatever it is
>> called or the closet thing to it, I don't have the owner's manual and
>> there aren't any markings on the keyhole.) I'm pretty sure the cd
>> worked fine in the previous car when the key was in ACCESSORY) and it
>> works fine when the engine is on in the Jeep. The unit is getting
>> power when the engine is off. (There is a little light that blinks
>> when the radio face plate is removed).
>>
>> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
>> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
>> radio/power antenna in the Chilton diagram of the fuse block that
>> looks like the one I have. I don't have the owner's manual and the
>> fuse block doesn't seem to have a cover or anything listing what goes
>> where. I have no idea what an ETR radio is, but google seems to
>> think it stands for 'electronically tunable radio'. The original
>> factory radio was electronically tunable or digital tuning at least
>> and worked fine without the fuse (at least the radio did, I think the
>> cassette is permanently busted). I don't have a power antenna. I'm
>> about to stick a 10 amp fuse in there to see if I can get to work.
>> Any ideas before I fubar everything?
>>
>> oh and to the people who said aftermarket radios are ugly in a
>> previous thread, yeah it's pretty ugly.
>
>
>
Guest
Posts: n/a
aargh, stereo won't play unless engine is running (was: Any way to verify a socket's fuse rating?)
arrgh the fuse location I mentioned doesn't appear to be connected to
anything (it only has one metal contact, the other side is empty plastic)
I'll try to find that thread you are talking about.
"billy ray" <billy_ray@SPAMfuse.net> wrote in
news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
> I'm thinking the ETR fuse powers, in addition to the power antenna,
> the small amount of juice it takes to keep your radio stations and run
> the clock etc. It would be hot all the time..
>
> We recently had a thread running about aftermarket radio wiring SNAFUs
> so be careful when replacing the fuse as it may have been taken out
> for a reason.
>
> "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> news:BLc0g.386$_s5.209@trnddc04...
>> Hello,
>>
>> I just replaced my factory radio/cassette with a radio/cd player in a
>> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
>> engine is off and the key is turned to ACCessory (or whatever it is
>> called or the closet thing to it, I don't have the owner's manual and
>> there aren't any markings on the keyhole.) I'm pretty sure the cd
>> worked fine in the previous car when the key was in ACCESSORY) and it
>> works fine when the engine is on in the Jeep. The unit is getting
>> power when the engine is off. (There is a little light that blinks
>> when the radio face plate is removed).
>>
>> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
>> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
>> radio/power antenna in the Chilton diagram of the fuse block that
>> looks like the one I have. I don't have the owner's manual and the
>> fuse block doesn't seem to have a cover or anything listing what goes
>> where. I have no idea what an ETR radio is, but google seems to
>> think it stands for 'electronically tunable radio'. The original
>> factory radio was electronically tunable or digital tuning at least
>> and worked fine without the fuse (at least the radio did, I think the
>> cassette is permanently busted). I don't have a power antenna. I'm
>> about to stick a 10 amp fuse in there to see if I can get to work.
>> Any ideas before I fubar everything?
>>
>> oh and to the people who said aftermarket radios are ugly in a
>> previous thread, yeah it's pretty ugly.
>
>
>
anything (it only has one metal contact, the other side is empty plastic)
I'll try to find that thread you are talking about.
"billy ray" <billy_ray@SPAMfuse.net> wrote in
news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
> I'm thinking the ETR fuse powers, in addition to the power antenna,
> the small amount of juice it takes to keep your radio stations and run
> the clock etc. It would be hot all the time..
>
> We recently had a thread running about aftermarket radio wiring SNAFUs
> so be careful when replacing the fuse as it may have been taken out
> for a reason.
>
> "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> news:BLc0g.386$_s5.209@trnddc04...
>> Hello,
>>
>> I just replaced my factory radio/cassette with a radio/cd player in a
>> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
>> engine is off and the key is turned to ACCessory (or whatever it is
>> called or the closet thing to it, I don't have the owner's manual and
>> there aren't any markings on the keyhole.) I'm pretty sure the cd
>> worked fine in the previous car when the key was in ACCESSORY) and it
>> works fine when the engine is on in the Jeep. The unit is getting
>> power when the engine is off. (There is a little light that blinks
>> when the radio face plate is removed).
>>
>> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
>> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
>> radio/power antenna in the Chilton diagram of the fuse block that
>> looks like the one I have. I don't have the owner's manual and the
>> fuse block doesn't seem to have a cover or anything listing what goes
>> where. I have no idea what an ETR radio is, but google seems to
>> think it stands for 'electronically tunable radio'. The original
>> factory radio was electronically tunable or digital tuning at least
>> and worked fine without the fuse (at least the radio did, I think the
>> cassette is permanently busted). I don't have a power antenna. I'm
>> about to stick a 10 amp fuse in there to see if I can get to work.
>> Any ideas before I fubar everything?
>>
>> oh and to the people who said aftermarket radios are ugly in a
>> previous thread, yeah it's pretty ugly.
>
>
>
Guest
Posts: n/a
aargh, stereo won't play unless engine is running (was: Any way to verify a socket's fuse rating?)
arrgh the fuse location I mentioned doesn't appear to be connected to
anything (it only has one metal contact, the other side is empty plastic)
I'll try to find that thread you are talking about.
"billy ray" <billy_ray@SPAMfuse.net> wrote in
news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
> I'm thinking the ETR fuse powers, in addition to the power antenna,
> the small amount of juice it takes to keep your radio stations and run
> the clock etc. It would be hot all the time..
>
> We recently had a thread running about aftermarket radio wiring SNAFUs
> so be careful when replacing the fuse as it may have been taken out
> for a reason.
>
> "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> news:BLc0g.386$_s5.209@trnddc04...
>> Hello,
>>
>> I just replaced my factory radio/cassette with a radio/cd player in a
>> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
>> engine is off and the key is turned to ACCessory (or whatever it is
>> called or the closet thing to it, I don't have the owner's manual and
>> there aren't any markings on the keyhole.) I'm pretty sure the cd
>> worked fine in the previous car when the key was in ACCESSORY) and it
>> works fine when the engine is on in the Jeep. The unit is getting
>> power when the engine is off. (There is a little light that blinks
>> when the radio face plate is removed).
>>
>> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
>> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
>> radio/power antenna in the Chilton diagram of the fuse block that
>> looks like the one I have. I don't have the owner's manual and the
>> fuse block doesn't seem to have a cover or anything listing what goes
>> where. I have no idea what an ETR radio is, but google seems to
>> think it stands for 'electronically tunable radio'. The original
>> factory radio was electronically tunable or digital tuning at least
>> and worked fine without the fuse (at least the radio did, I think the
>> cassette is permanently busted). I don't have a power antenna. I'm
>> about to stick a 10 amp fuse in there to see if I can get to work.
>> Any ideas before I fubar everything?
>>
>> oh and to the people who said aftermarket radios are ugly in a
>> previous thread, yeah it's pretty ugly.
>
>
>
anything (it only has one metal contact, the other side is empty plastic)
I'll try to find that thread you are talking about.
"billy ray" <billy_ray@SPAMfuse.net> wrote in
news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
> I'm thinking the ETR fuse powers, in addition to the power antenna,
> the small amount of juice it takes to keep your radio stations and run
> the clock etc. It would be hot all the time..
>
> We recently had a thread running about aftermarket radio wiring SNAFUs
> so be careful when replacing the fuse as it may have been taken out
> for a reason.
>
> "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> news:BLc0g.386$_s5.209@trnddc04...
>> Hello,
>>
>> I just replaced my factory radio/cassette with a radio/cd player in a
>> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
>> engine is off and the key is turned to ACCessory (or whatever it is
>> called or the closet thing to it, I don't have the owner's manual and
>> there aren't any markings on the keyhole.) I'm pretty sure the cd
>> worked fine in the previous car when the key was in ACCESSORY) and it
>> works fine when the engine is on in the Jeep. The unit is getting
>> power when the engine is off. (There is a little light that blinks
>> when the radio face plate is removed).
>>
>> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
>> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
>> radio/power antenna in the Chilton diagram of the fuse block that
>> looks like the one I have. I don't have the owner's manual and the
>> fuse block doesn't seem to have a cover or anything listing what goes
>> where. I have no idea what an ETR radio is, but google seems to
>> think it stands for 'electronically tunable radio'. The original
>> factory radio was electronically tunable or digital tuning at least
>> and worked fine without the fuse (at least the radio did, I think the
>> cassette is permanently busted). I don't have a power antenna. I'm
>> about to stick a 10 amp fuse in there to see if I can get to work.
>> Any ideas before I fubar everything?
>>
>> oh and to the people who said aftermarket radios are ugly in a
>> previous thread, yeah it's pretty ugly.
>
>
>
Guest
Posts: n/a
Re: aargh, stereo won't play unless engine is running (was: Any way to verify a socket's fuse rating?)
If you send me an e-address I'll forward some info..
The thread subject line was:
"86 Cherokee. Need desperate electrical help!!!! plz"
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:Ame0g.398$_s5.368@trnddc04...
> arrgh the fuse location I mentioned doesn't appear to be connected to
> anything (it only has one metal contact, the other side is empty plastic)
>
> I'll try to find that thread you are talking about.
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in
> news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
>
> > I'm thinking the ETR fuse powers, in addition to the power antenna,
> > the small amount of juice it takes to keep your radio stations and run
> > the clock etc. It would be hot all the time..
> >
> > We recently had a thread running about aftermarket radio wiring SNAFUs
> > so be careful when replacing the fuse as it may have been taken out
> > for a reason.
> >
> > "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> > news:BLc0g.386$_s5.209@trnddc04...
> >> Hello,
> >>
> >> I just replaced my factory radio/cassette with a radio/cd player in a
> >> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
> >> engine is off and the key is turned to ACCessory (or whatever it is
> >> called or the closet thing to it, I don't have the owner's manual and
> >> there aren't any markings on the keyhole.) I'm pretty sure the cd
> >> worked fine in the previous car when the key was in ACCESSORY) and it
> >> works fine when the engine is on in the Jeep. The unit is getting
> >> power when the engine is off. (There is a little light that blinks
> >> when the radio face plate is removed).
> >>
> >> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
> >> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
> >> radio/power antenna in the Chilton diagram of the fuse block that
> >> looks like the one I have. I don't have the owner's manual and the
> >> fuse block doesn't seem to have a cover or anything listing what goes
> >> where. I have no idea what an ETR radio is, but google seems to
> >> think it stands for 'electronically tunable radio'. The original
> >> factory radio was electronically tunable or digital tuning at least
> >> and worked fine without the fuse (at least the radio did, I think the
> >> cassette is permanently busted). I don't have a power antenna. I'm
> >> about to stick a 10 amp fuse in there to see if I can get to work.
> >> Any ideas before I fubar everything?
> >>
> >> oh and to the people who said aftermarket radios are ugly in a
> >> previous thread, yeah it's pretty ugly.
> >
> >
> >
>
The thread subject line was:
"86 Cherokee. Need desperate electrical help!!!! plz"
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:Ame0g.398$_s5.368@trnddc04...
> arrgh the fuse location I mentioned doesn't appear to be connected to
> anything (it only has one metal contact, the other side is empty plastic)
>
> I'll try to find that thread you are talking about.
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in
> news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
>
> > I'm thinking the ETR fuse powers, in addition to the power antenna,
> > the small amount of juice it takes to keep your radio stations and run
> > the clock etc. It would be hot all the time..
> >
> > We recently had a thread running about aftermarket radio wiring SNAFUs
> > so be careful when replacing the fuse as it may have been taken out
> > for a reason.
> >
> > "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> > news:BLc0g.386$_s5.209@trnddc04...
> >> Hello,
> >>
> >> I just replaced my factory radio/cassette with a radio/cd player in a
> >> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
> >> engine is off and the key is turned to ACCessory (or whatever it is
> >> called or the closet thing to it, I don't have the owner's manual and
> >> there aren't any markings on the keyhole.) I'm pretty sure the cd
> >> worked fine in the previous car when the key was in ACCESSORY) and it
> >> works fine when the engine is on in the Jeep. The unit is getting
> >> power when the engine is off. (There is a little light that blinks
> >> when the radio face plate is removed).
> >>
> >> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
> >> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
> >> radio/power antenna in the Chilton diagram of the fuse block that
> >> looks like the one I have. I don't have the owner's manual and the
> >> fuse block doesn't seem to have a cover or anything listing what goes
> >> where. I have no idea what an ETR radio is, but google seems to
> >> think it stands for 'electronically tunable radio'. The original
> >> factory radio was electronically tunable or digital tuning at least
> >> and worked fine without the fuse (at least the radio did, I think the
> >> cassette is permanently busted). I don't have a power antenna. I'm
> >> about to stick a 10 amp fuse in there to see if I can get to work.
> >> Any ideas before I fubar everything?
> >>
> >> oh and to the people who said aftermarket radios are ugly in a
> >> previous thread, yeah it's pretty ugly.
> >
> >
> >
>
Guest
Posts: n/a
Re: aargh, stereo won't play unless engine is running (was: Any way to verify a socket's fuse rating?)
If you send me an e-address I'll forward some info..
The thread subject line was:
"86 Cherokee. Need desperate electrical help!!!! plz"
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:Ame0g.398$_s5.368@trnddc04...
> arrgh the fuse location I mentioned doesn't appear to be connected to
> anything (it only has one metal contact, the other side is empty plastic)
>
> I'll try to find that thread you are talking about.
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in
> news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
>
> > I'm thinking the ETR fuse powers, in addition to the power antenna,
> > the small amount of juice it takes to keep your radio stations and run
> > the clock etc. It would be hot all the time..
> >
> > We recently had a thread running about aftermarket radio wiring SNAFUs
> > so be careful when replacing the fuse as it may have been taken out
> > for a reason.
> >
> > "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> > news:BLc0g.386$_s5.209@trnddc04...
> >> Hello,
> >>
> >> I just replaced my factory radio/cassette with a radio/cd player in a
> >> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
> >> engine is off and the key is turned to ACCessory (or whatever it is
> >> called or the closet thing to it, I don't have the owner's manual and
> >> there aren't any markings on the keyhole.) I'm pretty sure the cd
> >> worked fine in the previous car when the key was in ACCESSORY) and it
> >> works fine when the engine is on in the Jeep. The unit is getting
> >> power when the engine is off. (There is a little light that blinks
> >> when the radio face plate is removed).
> >>
> >> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
> >> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
> >> radio/power antenna in the Chilton diagram of the fuse block that
> >> looks like the one I have. I don't have the owner's manual and the
> >> fuse block doesn't seem to have a cover or anything listing what goes
> >> where. I have no idea what an ETR radio is, but google seems to
> >> think it stands for 'electronically tunable radio'. The original
> >> factory radio was electronically tunable or digital tuning at least
> >> and worked fine without the fuse (at least the radio did, I think the
> >> cassette is permanently busted). I don't have a power antenna. I'm
> >> about to stick a 10 amp fuse in there to see if I can get to work.
> >> Any ideas before I fubar everything?
> >>
> >> oh and to the people who said aftermarket radios are ugly in a
> >> previous thread, yeah it's pretty ugly.
> >
> >
> >
>
The thread subject line was:
"86 Cherokee. Need desperate electrical help!!!! plz"
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:Ame0g.398$_s5.368@trnddc04...
> arrgh the fuse location I mentioned doesn't appear to be connected to
> anything (it only has one metal contact, the other side is empty plastic)
>
> I'll try to find that thread you are talking about.
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in
> news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
>
> > I'm thinking the ETR fuse powers, in addition to the power antenna,
> > the small amount of juice it takes to keep your radio stations and run
> > the clock etc. It would be hot all the time..
> >
> > We recently had a thread running about aftermarket radio wiring SNAFUs
> > so be careful when replacing the fuse as it may have been taken out
> > for a reason.
> >
> > "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> > news:BLc0g.386$_s5.209@trnddc04...
> >> Hello,
> >>
> >> I just replaced my factory radio/cassette with a radio/cd player in a
> >> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
> >> engine is off and the key is turned to ACCessory (or whatever it is
> >> called or the closet thing to it, I don't have the owner's manual and
> >> there aren't any markings on the keyhole.) I'm pretty sure the cd
> >> worked fine in the previous car when the key was in ACCESSORY) and it
> >> works fine when the engine is on in the Jeep. The unit is getting
> >> power when the engine is off. (There is a little light that blinks
> >> when the radio face plate is removed).
> >>
> >> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
> >> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
> >> radio/power antenna in the Chilton diagram of the fuse block that
> >> looks like the one I have. I don't have the owner's manual and the
> >> fuse block doesn't seem to have a cover or anything listing what goes
> >> where. I have no idea what an ETR radio is, but google seems to
> >> think it stands for 'electronically tunable radio'. The original
> >> factory radio was electronically tunable or digital tuning at least
> >> and worked fine without the fuse (at least the radio did, I think the
> >> cassette is permanently busted). I don't have a power antenna. I'm
> >> about to stick a 10 amp fuse in there to see if I can get to work.
> >> Any ideas before I fubar everything?
> >>
> >> oh and to the people who said aftermarket radios are ugly in a
> >> previous thread, yeah it's pretty ugly.
> >
> >
> >
>
Guest
Posts: n/a
Re: aargh, stereo won't play unless engine is running (was: Any way to verify a socket's fuse rating?)
If you send me an e-address I'll forward some info..
The thread subject line was:
"86 Cherokee. Need desperate electrical help!!!! plz"
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:Ame0g.398$_s5.368@trnddc04...
> arrgh the fuse location I mentioned doesn't appear to be connected to
> anything (it only has one metal contact, the other side is empty plastic)
>
> I'll try to find that thread you are talking about.
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in
> news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
>
> > I'm thinking the ETR fuse powers, in addition to the power antenna,
> > the small amount of juice it takes to keep your radio stations and run
> > the clock etc. It would be hot all the time..
> >
> > We recently had a thread running about aftermarket radio wiring SNAFUs
> > so be careful when replacing the fuse as it may have been taken out
> > for a reason.
> >
> > "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> > news:BLc0g.386$_s5.209@trnddc04...
> >> Hello,
> >>
> >> I just replaced my factory radio/cassette with a radio/cd player in a
> >> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
> >> engine is off and the key is turned to ACCessory (or whatever it is
> >> called or the closet thing to it, I don't have the owner's manual and
> >> there aren't any markings on the keyhole.) I'm pretty sure the cd
> >> worked fine in the previous car when the key was in ACCESSORY) and it
> >> works fine when the engine is on in the Jeep. The unit is getting
> >> power when the engine is off. (There is a little light that blinks
> >> when the radio face plate is removed).
> >>
> >> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
> >> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
> >> radio/power antenna in the Chilton diagram of the fuse block that
> >> looks like the one I have. I don't have the owner's manual and the
> >> fuse block doesn't seem to have a cover or anything listing what goes
> >> where. I have no idea what an ETR radio is, but google seems to
> >> think it stands for 'electronically tunable radio'. The original
> >> factory radio was electronically tunable or digital tuning at least
> >> and worked fine without the fuse (at least the radio did, I think the
> >> cassette is permanently busted). I don't have a power antenna. I'm
> >> about to stick a 10 amp fuse in there to see if I can get to work.
> >> Any ideas before I fubar everything?
> >>
> >> oh and to the people who said aftermarket radios are ugly in a
> >> previous thread, yeah it's pretty ugly.
> >
> >
> >
>
The thread subject line was:
"86 Cherokee. Need desperate electrical help!!!! plz"
"New Old Jeep Owner" <beep@jeep.jeep> wrote in message
news:Ame0g.398$_s5.368@trnddc04...
> arrgh the fuse location I mentioned doesn't appear to be connected to
> anything (it only has one metal contact, the other side is empty plastic)
>
> I'll try to find that thread you are talking about.
>
> "billy ray" <billy_ray@SPAMfuse.net> wrote in
> news:ddf43$44416bcf$4831b233$27693@FUSE.NET:
>
> > I'm thinking the ETR fuse powers, in addition to the power antenna,
> > the small amount of juice it takes to keep your radio stations and run
> > the clock etc. It would be hot all the time..
> >
> > We recently had a thread running about aftermarket radio wiring SNAFUs
> > so be careful when replacing the fuse as it may have been taken out
> > for a reason.
> >
> > "New Old Jeep Owner" <beep@jeep.jeep> wrote in message
> > news:BLc0g.386$_s5.209@trnddc04...
> >> Hello,
> >>
> >> I just replaced my factory radio/cassette with a radio/cd player in a
> >> 1994 Jeep Cherokee. The problem is the unit doesn't play when the
> >> engine is off and the key is turned to ACCessory (or whatever it is
> >> called or the closet thing to it, I don't have the owner's manual and
> >> there aren't any markings on the keyhole.) I'm pretty sure the cd
> >> worked fine in the previous car when the key was in ACCESSORY) and it
> >> works fine when the engine is on in the Jeep. The unit is getting
> >> power when the engine is off. (There is a little light that blinks
> >> when the radio face plate is removed).
> >>
> >> Anyway, I looked up a fuse chart in a CHILTON manual for 1994
> >> Cherokees and there is a listing for a 10 amp fuse labeled for ETR
> >> radio/power antenna in the Chilton diagram of the fuse block that
> >> looks like the one I have. I don't have the owner's manual and the
> >> fuse block doesn't seem to have a cover or anything listing what goes
> >> where. I have no idea what an ETR radio is, but google seems to
> >> think it stands for 'electronically tunable radio'. The original
> >> factory radio was electronically tunable or digital tuning at least
> >> and worked fine without the fuse (at least the radio did, I think the
> >> cassette is permanently busted). I don't have a power antenna. I'm
> >> about to stick a 10 amp fuse in there to see if I can get to work.
> >> Any ideas before I fubar everything?
> >>
> >> oh and to the people who said aftermarket radios are ugly in a
> >> previous thread, yeah it's pretty ugly.
> >
> >
> >
>
