Well that would be fine with me, I am sure I am already in one of those
computers somewhere as my brother-in-law is a State Senator, and I have
other relatives that work for unmentioned branches of the gov. Heck they
have probably had me on one of those computers since birth. So if they
don't have anything better to waste their time and money on then let them.
(LOL)
But they can't have the shifter!!!!!!!

Tom


"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> Well..... you have me there, I did not get to use the hatchet as there was
> plenty of wood available cut by someone with a chain saw.
>
> I don't think they would believe you when you explained to them the
primers
> had already been fired. There probably isn't a category exemption for
> expended munitions and they would impound your shift **** after tossing
your
> Jeep and put you in the big computer as a potential raghead ---------/gun
> runner/smuggler.
>
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> > Billy,
> > If they take the time to look at it they will see that they have already
> > been popped. Not to mention you would have to drill them out to get
them
> > out, as they are press fit in, and wont be coming out any to easy. (lol)
> > And WHY would you need a hatchet? I mean really!! (LOL)
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> Don't let then catch you coming back over the border with those,
Homeland
> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> wilderness camping.
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >I would have to say JB weld also, or find you a good machine shop and
> > have
> >> >a
> >> > threaded insert made or just get them to make you a new shift **** to
> > fit.
> >> > Here is the one I had made for mine.
> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> > Tom
> >> >
> >> >
> >> > "Rusted" <noEmail@please.com> wrote in message
> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
> >> >> fits
> >> >> generic shift levers. The plastic is not holding up, so I want to
hit
> >> >> the
> >> >> hardware store for a nut that I can grind / shape to fit inside the
> > shift
> >> >> ****. Any suggestions on joining the nut to the inside of the ****
> >> >> so
> >> > that
> >> >> it stays put? I figured an epoxy will work, any other suggestions?
> > Any
> >> >> favorable epoxies to look for?
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

It is very nice. I would have to use .44 specials as my elbow was damaged
years ago.

Just this morning sent an e-mail to the Canadian Tourism people about
wilderness camping in the Bancroft area, see the reply below:

Unfortunately, your mail was not delivered to the following address:

<Tourism.Research@mtr.gov.on.ca>:
Connected to 192.75.156.245 but sender was rejected.

Now I have been rejected by a whole country!



"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> Well that would be fine with me, I am sure I am already in one of those
> computers somewhere as my brother-in-law is a State Senator, and I have
> other relatives that work for unmentioned branches of the gov. Heck they
> have probably had me on one of those computers since birth. So if they
> don't have anything better to waste their time and money on then let them.
> (LOL)
> But they can't have the shifter!!!!!!!
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
>> Well..... you have me there, I did not get to use the hatchet as there
>> was
>> plenty of wood available cut by someone with a chain saw.
>>
>> I don't think they would believe you when you explained to them the
> primers
>> had already been fired. There probably isn't a category exemption for
>> expended munitions and they would impound your shift **** after tossing
> your
>> Jeep and put you in the big computer as a potential raghead ---------/gun
>> runner/smuggler.
>>
>>
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
>> > Billy,
>> > If they take the time to look at it they will see that they have
>> > already
>> > been popped. Not to mention you would have to drill them out to get
> them
>> > out, as they are press fit in, and wont be coming out any to easy.
>> > (lol)
>> > And WHY would you need a hatchet? I mean really!! (LOL)
>> >
>> > Tom
>> >
>> >
>> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> >> Don't let then catch you coming back over the border with those,
> Homeland
>> >> Security in Detroit couldn't imagine why I might need a hatchet when
>> >> wilderness camping.
>> >>
>> >>
>> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >> >I would have to say JB weld also, or find you a good machine shop and
>> > have
>> >> >a
>> >> > threaded insert made or just get them to make you a new shift ****
>> >> > to
>> > fit.
>> >> > Here is the one I had made for mine.
>> >> > http://www.cantrell.com/scrap/shifter21.JPG
>> >> > Tom
>> >> >
>> >> >
>> >> > "Rusted" <noEmail@please.com> wrote in message
>> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> >> fits
>> >> >> generic shift levers. The plastic is not holding up, so I want to
> hit
>> >> >> the
>> >> >> hardware store for a nut that I can grind / shape to fit inside the
>> > shift
>> >> >> ****. Any suggestions on joining the nut to the inside of the
>> >> >> ****
>> >> >> so
>> >> > that
>> >> >> it stays put? I figured an epoxy will work, any other suggestions?
>> > Any
>> >> >> favorable epoxies to look for?
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>

 

It is very nice. I would have to use .44 specials as my elbow was damaged
years ago.

Just this morning sent an e-mail to the Canadian Tourism people about
wilderness camping in the Bancroft area, see the reply below:

Unfortunately, your mail was not delivered to the following address:

<Tourism.Research@mtr.gov.on.ca>:
Connected to 192.75.156.245 but sender was rejected.

Now I have been rejected by a whole country!



"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> Well that would be fine with me, I am sure I am already in one of those
> computers somewhere as my brother-in-law is a State Senator, and I have
> other relatives that work for unmentioned branches of the gov. Heck they
> have probably had me on one of those computers since birth. So if they
> don't have anything better to waste their time and money on then let them.
> (LOL)
> But they can't have the shifter!!!!!!!
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
>> Well..... you have me there, I did not get to use the hatchet as there
>> was
>> plenty of wood available cut by someone with a chain saw.
>>
>> I don't think they would believe you when you explained to them the
> primers
>> had already been fired. There probably isn't a category exemption for
>> expended munitions and they would impound your shift **** after tossing
> your
>> Jeep and put you in the big computer as a potential raghead ---------/gun
>> runner/smuggler.
>>
>>
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
>> > Billy,
>> > If they take the time to look at it they will see that they have
>> > already
>> > been popped. Not to mention you would have to drill them out to get
> them
>> > out, as they are press fit in, and wont be coming out any to easy.
>> > (lol)
>> > And WHY would you need a hatchet? I mean really!! (LOL)
>> >
>> > Tom
>> >
>> >
>> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> >> Don't let then catch you coming back over the border with those,
> Homeland
>> >> Security in Detroit couldn't imagine why I might need a hatchet when
>> >> wilderness camping.
>> >>
>> >>
>> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >> >I would have to say JB weld also, or find you a good machine shop and
>> > have
>> >> >a
>> >> > threaded insert made or just get them to make you a new shift ****
>> >> > to
>> > fit.
>> >> > Here is the one I had made for mine.
>> >> > http://www.cantrell.com/scrap/shifter21.JPG
>> >> > Tom
>> >> >
>> >> >
>> >> > "Rusted" <noEmail@please.com> wrote in message
>> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> >> fits
>> >> >> generic shift levers. The plastic is not holding up, so I want to
> hit
>> >> >> the
>> >> >> hardware store for a nut that I can grind / shape to fit inside the
>> > shift
>> >> >> ****. Any suggestions on joining the nut to the inside of the
>> >> >> ****
>> >> >> so
>> >> > that
>> >> >> it stays put? I figured an epoxy will work, any other suggestions?
>> > Any
>> >> >> favorable epoxies to look for?
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>

 

It is very nice. I would have to use .44 specials as my elbow was damaged
years ago.

Just this morning sent an e-mail to the Canadian Tourism people about
wilderness camping in the Bancroft area, see the reply below:

Unfortunately, your mail was not delivered to the following address:

<Tourism.Research@mtr.gov.on.ca>:
Connected to 192.75.156.245 but sender was rejected.

Now I have been rejected by a whole country!



"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> Well that would be fine with me, I am sure I am already in one of those
> computers somewhere as my brother-in-law is a State Senator, and I have
> other relatives that work for unmentioned branches of the gov. Heck they
> have probably had me on one of those computers since birth. So if they
> don't have anything better to waste their time and money on then let them.
> (LOL)
> But they can't have the shifter!!!!!!!
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
>> Well..... you have me there, I did not get to use the hatchet as there
>> was
>> plenty of wood available cut by someone with a chain saw.
>>
>> I don't think they would believe you when you explained to them the
> primers
>> had already been fired. There probably isn't a category exemption for
>> expended munitions and they would impound your shift **** after tossing
> your
>> Jeep and put you in the big computer as a potential raghead ---------/gun
>> runner/smuggler.
>>
>>
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
>> > Billy,
>> > If they take the time to look at it they will see that they have
>> > already
>> > been popped. Not to mention you would have to drill them out to get
> them
>> > out, as they are press fit in, and wont be coming out any to easy.
>> > (lol)
>> > And WHY would you need a hatchet? I mean really!! (LOL)
>> >
>> > Tom
>> >
>> >
>> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> >> Don't let then catch you coming back over the border with those,
> Homeland
>> >> Security in Detroit couldn't imagine why I might need a hatchet when
>> >> wilderness camping.
>> >>
>> >>
>> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >> >I would have to say JB weld also, or find you a good machine shop and
>> > have
>> >> >a
>> >> > threaded insert made or just get them to make you a new shift ****
>> >> > to
>> > fit.
>> >> > Here is the one I had made for mine.
>> >> > http://www.cantrell.com/scrap/shifter21.JPG
>> >> > Tom
>> >> >
>> >> >
>> >> > "Rusted" <noEmail@please.com> wrote in message
>> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> >> fits
>> >> >> generic shift levers. The plastic is not holding up, so I want to
> hit
>> >> >> the
>> >> >> hardware store for a nut that I can grind / shape to fit inside the
>> > shift
>> >> >> ****. Any suggestions on joining the nut to the inside of the
>> >> >> ****
>> >> >> so
>> >> > that
>> >> >> it stays put? I figured an epoxy will work, any other suggestions?
>> > Any
>> >> >> favorable epoxies to look for?
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>

 

It is very nice. I would have to use .44 specials as my elbow was damaged
years ago.

Just this morning sent an e-mail to the Canadian Tourism people about
wilderness camping in the Bancroft area, see the reply below:

Unfortunately, your mail was not delivered to the following address:

<Tourism.Research@mtr.gov.on.ca>:
Connected to 192.75.156.245 but sender was rejected.

Now I have been rejected by a whole country!



"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> Well that would be fine with me, I am sure I am already in one of those
> computers somewhere as my brother-in-law is a State Senator, and I have
> other relatives that work for unmentioned branches of the gov. Heck they
> have probably had me on one of those computers since birth. So if they
> don't have anything better to waste their time and money on then let them.
> (LOL)
> But they can't have the shifter!!!!!!!
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
>> Well..... you have me there, I did not get to use the hatchet as there
>> was
>> plenty of wood available cut by someone with a chain saw.
>>
>> I don't think they would believe you when you explained to them the
> primers
>> had already been fired. There probably isn't a category exemption for
>> expended munitions and they would impound your shift **** after tossing
> your
>> Jeep and put you in the big computer as a potential raghead ---------/gun
>> runner/smuggler.
>>
>>
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
>> > Billy,
>> > If they take the time to look at it they will see that they have
>> > already
>> > been popped. Not to mention you would have to drill them out to get
> them
>> > out, as they are press fit in, and wont be coming out any to easy.
>> > (lol)
>> > And WHY would you need a hatchet? I mean really!! (LOL)
>> >
>> > Tom
>> >
>> >
>> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> >> Don't let then catch you coming back over the border with those,
> Homeland
>> >> Security in Detroit couldn't imagine why I might need a hatchet when
>> >> wilderness camping.
>> >>
>> >>
>> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >> >I would have to say JB weld also, or find you a good machine shop and
>> > have
>> >> >a
>> >> > threaded insert made or just get them to make you a new shift ****
>> >> > to
>> > fit.
>> >> > Here is the one I had made for mine.
>> >> > http://www.cantrell.com/scrap/shifter21.JPG
>> >> > Tom
>> >> >
>> >> >
>> >> > "Rusted" <noEmail@please.com> wrote in message
>> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> >> fits
>> >> >> generic shift levers. The plastic is not holding up, so I want to
> hit
>> >> >> the
>> >> >> hardware store for a nut that I can grind / shape to fit inside the
>> > shift
>> >> >> ****. Any suggestions on joining the nut to the inside of the
>> >> >> ****
>> >> >> so
>> >> > that
>> >> >> it stays put? I figured an epoxy will work, any other suggestions?
>> > Any
>> >> >> favorable epoxies to look for?
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>

 

Maybe some one is trying to tell you to give up camping!

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:111ff$42f38f96$42a1cc8c$1060@FUSE.NET...
> It is very nice. I would have to use .44 specials as my elbow was damaged
> years ago.
>
> Just this morning sent an e-mail to the Canadian Tourism people about
> wilderness camping in the Bancroft area, see the reply below:
>
> Unfortunately, your mail was not delivered to the following address:
>
> <Tourism.Research@mtr.gov.on.ca>:
> Connected to 192.75.156.245 but sender was rejected.
>
> Now I have been rejected by a whole country!
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> > Well that would be fine with me, I am sure I am already in one of those
> > computers somewhere as my brother-in-law is a State Senator, and I have
> > other relatives that work for unmentioned branches of the gov. Heck
they
> > have probably had me on one of those computers since birth. So if they
> > don't have anything better to waste their time and money on then let
them.
> > (LOL)
> > But they can't have the shifter!!!!!!!
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> >> Well..... you have me there, I did not get to use the hatchet as there
> >> was
> >> plenty of wood available cut by someone with a chain saw.
> >>
> >> I don't think they would believe you when you explained to them the
> > primers
> >> had already been fired. There probably isn't a category exemption for
> >> expended munitions and they would impound your shift **** after tossing
> > your
> >> Jeep and put you in the big computer as a potential raghead
---------/gun
> >> runner/smuggler.
> >>
> >>
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> >> > Billy,
> >> > If they take the time to look at it they will see that they have
> >> > already
> >> > been popped. Not to mention you would have to drill them out to get
> > them
> >> > out, as they are press fit in, and wont be coming out any to easy.
> >> > (lol)
> >> > And WHY would you need a hatchet? I mean really!! (LOL)
> >> >
> >> > Tom
> >> >
> >> >
> >> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> >> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> >> Don't let then catch you coming back over the border with those,
> > Homeland
> >> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> >> wilderness camping.
> >> >>
> >> >>
> >> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >> >I would have to say JB weld also, or find you a good machine shop
and
> >> > have
> >> >> >a
> >> >> > threaded insert made or just get them to make you a new shift ****
> >> >> > to
> >> > fit.
> >> >> > Here is the one I had made for mine.
> >> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> >> > Tom
> >> >> >
> >> >> >
> >> >> > "Rusted" <noEmail@please.com> wrote in message
> >> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so
it
> >> >> >> fits
> >> >> >> generic shift levers. The plastic is not holding up, so I want
to
> > hit
> >> >> >> the
> >> >> >> hardware store for a nut that I can grind / shape to fit inside
the
> >> > shift
> >> >> >> ****. Any suggestions on joining the nut to the inside of the
> >> >> >> ****
> >> >> >> so
> >> >> > that
> >> >> >> it stays put? I figured an epoxy will work, any other
suggestions?
> >> > Any
> >> >> >> favorable epoxies to look for?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

Maybe some one is trying to tell you to give up camping!

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:111ff$42f38f96$42a1cc8c$1060@FUSE.NET...
> It is very nice. I would have to use .44 specials as my elbow was damaged
> years ago.
>
> Just this morning sent an e-mail to the Canadian Tourism people about
> wilderness camping in the Bancroft area, see the reply below:
>
> Unfortunately, your mail was not delivered to the following address:
>
> <Tourism.Research@mtr.gov.on.ca>:
> Connected to 192.75.156.245 but sender was rejected.
>
> Now I have been rejected by a whole country!
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> > Well that would be fine with me, I am sure I am already in one of those
> > computers somewhere as my brother-in-law is a State Senator, and I have
> > other relatives that work for unmentioned branches of the gov. Heck
they
> > have probably had me on one of those computers since birth. So if they
> > don't have anything better to waste their time and money on then let
them.
> > (LOL)
> > But they can't have the shifter!!!!!!!
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> >> Well..... you have me there, I did not get to use the hatchet as there
> >> was
> >> plenty of wood available cut by someone with a chain saw.
> >>
> >> I don't think they would believe you when you explained to them the
> > primers
> >> had already been fired. There probably isn't a category exemption for
> >> expended munitions and they would impound your shift **** after tossing
> > your
> >> Jeep and put you in the big computer as a potential raghead
---------/gun
> >> runner/smuggler.
> >>
> >>
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> >> > Billy,
> >> > If they take the time to look at it they will see that they have
> >> > already
> >> > been popped. Not to mention you would have to drill them out to get
> > them
> >> > out, as they are press fit in, and wont be coming out any to easy.
> >> > (lol)
> >> > And WHY would you need a hatchet? I mean really!! (LOL)
> >> >
> >> > Tom
> >> >
> >> >
> >> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> >> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> >> Don't let then catch you coming back over the border with those,
> > Homeland
> >> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> >> wilderness camping.
> >> >>
> >> >>
> >> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >> >I would have to say JB weld also, or find you a good machine shop
and
> >> > have
> >> >> >a
> >> >> > threaded insert made or just get them to make you a new shift ****
> >> >> > to
> >> > fit.
> >> >> > Here is the one I had made for mine.
> >> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> >> > Tom
> >> >> >
> >> >> >
> >> >> > "Rusted" <noEmail@please.com> wrote in message
> >> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so
it
> >> >> >> fits
> >> >> >> generic shift levers. The plastic is not holding up, so I want
to
> > hit
> >> >> >> the
> >> >> >> hardware store for a nut that I can grind / shape to fit inside
the
> >> > shift
> >> >> >> ****. Any suggestions on joining the nut to the inside of the
> >> >> >> ****
> >> >> >> so
> >> >> > that
> >> >> >> it stays put? I figured an epoxy will work, any other
suggestions?
> >> > Any
> >> >> >> favorable epoxies to look for?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

Maybe some one is trying to tell you to give up camping!

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:111ff$42f38f96$42a1cc8c$1060@FUSE.NET...
> It is very nice. I would have to use .44 specials as my elbow was damaged
> years ago.
>
> Just this morning sent an e-mail to the Canadian Tourism people about
> wilderness camping in the Bancroft area, see the reply below:
>
> Unfortunately, your mail was not delivered to the following address:
>
> <Tourism.Research@mtr.gov.on.ca>:
> Connected to 192.75.156.245 but sender was rejected.
>
> Now I have been rejected by a whole country!
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> > Well that would be fine with me, I am sure I am already in one of those
> > computers somewhere as my brother-in-law is a State Senator, and I have
> > other relatives that work for unmentioned branches of the gov. Heck
they
> > have probably had me on one of those computers since birth. So if they
> > don't have anything better to waste their time and money on then let
them.
> > (LOL)
> > But they can't have the shifter!!!!!!!
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> >> Well..... you have me there, I did not get to use the hatchet as there
> >> was
> >> plenty of wood available cut by someone with a chain saw.
> >>
> >> I don't think they would believe you when you explained to them the
> > primers
> >> had already been fired. There probably isn't a category exemption for
> >> expended munitions and they would impound your shift **** after tossing
> > your
> >> Jeep and put you in the big computer as a potential raghead
---------/gun
> >> runner/smuggler.
> >>
> >>
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> >> > Billy,
> >> > If they take the time to look at it they will see that they have
> >> > already
> >> > been popped. Not to mention you would have to drill them out to get
> > them
> >> > out, as they are press fit in, and wont be coming out any to easy.
> >> > (lol)
> >> > And WHY would you need a hatchet? I mean really!! (LOL)
> >> >
> >> > Tom
> >> >
> >> >
> >> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> >> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> >> Don't let then catch you coming back over the border with those,
> > Homeland
> >> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> >> wilderness camping.
> >> >>
> >> >>
> >> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >> >I would have to say JB weld also, or find you a good machine shop
and
> >> > have
> >> >> >a
> >> >> > threaded insert made or just get them to make you a new shift ****
> >> >> > to
> >> > fit.
> >> >> > Here is the one I had made for mine.
> >> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> >> > Tom
> >> >> >
> >> >> >
> >> >> > "Rusted" <noEmail@please.com> wrote in message
> >> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so
it
> >> >> >> fits
> >> >> >> generic shift levers. The plastic is not holding up, so I want
to
> > hit
> >> >> >> the
> >> >> >> hardware store for a nut that I can grind / shape to fit inside
the
> >> > shift
> >> >> >> ****. Any suggestions on joining the nut to the inside of the
> >> >> >> ****
> >> >> >> so
> >> >> > that
> >> >> >> it stays put? I figured an epoxy will work, any other
suggestions?
> >> > Any
> >> >> >> favorable epoxies to look for?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

Maybe some one is trying to tell you to give up camping!

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:111ff$42f38f96$42a1cc8c$1060@FUSE.NET...
> It is very nice. I would have to use .44 specials as my elbow was damaged
> years ago.
>
> Just this morning sent an e-mail to the Canadian Tourism people about
> wilderness camping in the Bancroft area, see the reply below:
>
> Unfortunately, your mail was not delivered to the following address:
>
> <Tourism.Research@mtr.gov.on.ca>:
> Connected to 192.75.156.245 but sender was rejected.
>
> Now I have been rejected by a whole country!
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> > Well that would be fine with me, I am sure I am already in one of those
> > computers somewhere as my brother-in-law is a State Senator, and I have
> > other relatives that work for unmentioned branches of the gov. Heck
they
> > have probably had me on one of those computers since birth. So if they
> > don't have anything better to waste their time and money on then let
them.
> > (LOL)
> > But they can't have the shifter!!!!!!!
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> >> Well..... you have me there, I did not get to use the hatchet as there
> >> was
> >> plenty of wood available cut by someone with a chain saw.
> >>
> >> I don't think they would believe you when you explained to them the
> > primers
> >> had already been fired. There probably isn't a category exemption for
> >> expended munitions and they would impound your shift **** after tossing
> > your
> >> Jeep and put you in the big computer as a potential raghead
---------/gun
> >> runner/smuggler.
> >>
> >>
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> >> > Billy,
> >> > If they take the time to look at it they will see that they have
> >> > already
> >> > been popped. Not to mention you would have to drill them out to get
> > them
> >> > out, as they are press fit in, and wont be coming out any to easy.
> >> > (lol)
> >> > And WHY would you need a hatchet? I mean really!! (LOL)
> >> >
> >> > Tom
> >> >
> >> >
> >> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> >> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> >> Don't let then catch you coming back over the border with those,
> > Homeland
> >> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> >> wilderness camping.
> >> >>
> >> >>
> >> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >> >I would have to say JB weld also, or find you a good machine shop
and
> >> > have
> >> >> >a
> >> >> > threaded insert made or just get them to make you a new shift ****
> >> >> > to
> >> > fit.
> >> >> > Here is the one I had made for mine.
> >> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> >> > Tom
> >> >> >
> >> >> >
> >> >> > "Rusted" <noEmail@please.com> wrote in message
> >> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so
it
> >> >> >> fits
> >> >> >> generic shift levers. The plastic is not holding up, so I want
to
> > hit
> >> >> >> the
> >> >> >> hardware store for a nut that I can grind / shape to fit inside
the
> >> > shift
> >> >> >> ****. Any suggestions on joining the nut to the inside of the
> >> >> >> ****
> >> >> >> so
> >> >> > that
> >> >> >> it stays put? I figured an epoxy will work, any other
suggestions?
> >> > Any
> >> >> >> favorable epoxies to look for?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

 

Billy,

You are welcome to camp in Colorado any time. We have it all, from motor
home campgrounds that look like a suburban housing development, to primitive
campgrounds at the end of a ten mile deer trail. All we ask, is that you
bring lots of money, buy stuff, and leave when you are done. I heard that
our neighbor states are nice too.

Earle

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:111ff$42f38f96$42a1cc8c$1060@FUSE.NET...
> It is very nice. I would have to use .44 specials as my elbow was damaged
> years ago.
>
> Just this morning sent an e-mail to the Canadian Tourism people about
> wilderness camping in the Bancroft area, see the reply below:
>
> Unfortunately, your mail was not delivered to the following address:
>
> <Tourism.Research@mtr.gov.on.ca>:
> Connected to 192.75.156.245 but sender was rejected.
>
> Now I have been rejected by a whole country!
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:ZGLIe.10158$hp.5043@bignews4.bellsouth.net...
> > Well that would be fine with me, I am sure I am already in one of those
> > computers somewhere as my brother-in-law is a State Senator, and I have
> > other relatives that work for unmentioned branches of the gov. Heck
they
> > have probably had me on one of those computers since birth. So if they
> > don't have anything better to waste their time and money on then let
them.
> > (LOL)
> > But they can't have the shifter!!!!!!!
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> >> Well..... you have me there, I did not get to use the hatchet as there
> >> was
> >> plenty of wood available cut by someone with a chain saw.
> >>
> >> I don't think they would believe you when you explained to them the
> > primers
> >> had already been fired. There probably isn't a category exemption for
> >> expended munitions and they would impound your shift **** after tossing
> > your
> >> Jeep and put you in the big computer as a potential raghead
---------/gun
> >> runner/smuggler.
> >>
> >>
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> >> > Billy,
> >> > If they take the time to look at it they will see that they have
> >> > already
> >> > been popped. Not to mention you would have to drill them out to get
> > them
> >> > out, as they are press fit in, and wont be coming out any to easy.
> >> > (lol)
> >> > And WHY would you need a hatchet? I mean really!! (LOL)
> >> >
> >> > Tom
> >> >
> >> >
> >> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> >> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> >> Don't let then catch you coming back over the border with those,
> > Homeland
> >> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> >> wilderness camping.
> >> >>
> >> >>
> >> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >> >I would have to say JB weld also, or find you a good machine shop
and
> >> > have
> >> >> >a
> >> >> > threaded insert made or just get them to make you a new shift ****
> >> >> > to
> >> > fit.
> >> >> > Here is the one I had made for mine.
> >> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> >> > Tom
> >> >> >
> >> >> >
> >> >> > "Rusted" <noEmail@please.com> wrote in message
> >> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so
it
> >> >> >> fits
> >> >> >> generic shift levers. The plastic is not holding up, so I want
to
> > hit
> >> >> >> the
> >> >> >> hardware store for a nut that I can grind / shape to fit inside
the
> >> > shift
> >> >> >> ****. Any suggestions on joining the nut to the inside of the
> >> >> >> ****
> >> >> >> so
> >> >> > that
> >> >> >> it stays put? I figured an epoxy will work, any other
suggestions?
> >> > Any
> >> >> >> favorable epoxies to look for?
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>