Aluminum to Steel
08-05-2005, 11:04 AM
#31
Guest
Posts: n/a
Re: Aluminum to Steel
Hey Billy Ray,
They would have a fit over my machete I keep under my door rail then too!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> Don't let then catch you coming back over the border with those, Homeland
> Security in Detroit couldn't imagine why I might need a hatchet when
> wilderness camping.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >I would have to say JB weld also, or find you a good machine shop and
have
> >a
> > threaded insert made or just get them to make you a new shift **** to
fit.
> > Here is the one I had made for mine.
> > http://www.cantrell.com/scrap/shifter21.JPG
> > Tom
> >
> >
> > "Rusted" <noEmail@please.com> wrote in message
> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> Aluminum shift **** (that I like) with a crappy plastic shim so it fits
> >> generic shift levers. The plastic is not holding up, so I want to hit
> >> the
> >> hardware store for a nut that I can grind / shape to fit inside the
shift
> >> ****. Any suggestions on joining the nut to the inside of the **** so
> > that
> >> it stays put? I figured an epoxy will work, any other suggestions?
Any
> >> favorable epoxies to look for?
> >>
> >>
> >>
> >
> >
>
>
They would have a fit over my machete I keep under my door rail then too!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> Don't let then catch you coming back over the border with those, Homeland
> Security in Detroit couldn't imagine why I might need a hatchet when
> wilderness camping.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >I would have to say JB weld also, or find you a good machine shop and
have
> >a
> > threaded insert made or just get them to make you a new shift **** to
fit.
> > Here is the one I had made for mine.
> > http://www.cantrell.com/scrap/shifter21.JPG
> > Tom
> >
> >
> > "Rusted" <noEmail@please.com> wrote in message
> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> Aluminum shift **** (that I like) with a crappy plastic shim so it fits
> >> generic shift levers. The plastic is not holding up, so I want to hit
> >> the
> >> hardware store for a nut that I can grind / shape to fit inside the
shift
> >> ****. Any suggestions on joining the nut to the inside of the **** so
> > that
> >> it stays put? I figured an epoxy will work, any other suggestions?
Any
> >> favorable epoxies to look for?
> >>
> >>
> >>
> >
> >
>
>
08-05-2005, 11:04 AM
#32
Guest
Posts: n/a
Re: Aluminum to Steel
Hey Billy Ray,
They would have a fit over my machete I keep under my door rail then too!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> Don't let then catch you coming back over the border with those, Homeland
> Security in Detroit couldn't imagine why I might need a hatchet when
> wilderness camping.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >I would have to say JB weld also, or find you a good machine shop and
have
> >a
> > threaded insert made or just get them to make you a new shift **** to
fit.
> > Here is the one I had made for mine.
> > http://www.cantrell.com/scrap/shifter21.JPG
> > Tom
> >
> >
> > "Rusted" <noEmail@please.com> wrote in message
> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> Aluminum shift **** (that I like) with a crappy plastic shim so it fits
> >> generic shift levers. The plastic is not holding up, so I want to hit
> >> the
> >> hardware store for a nut that I can grind / shape to fit inside the
shift
> >> ****. Any suggestions on joining the nut to the inside of the **** so
> > that
> >> it stays put? I figured an epoxy will work, any other suggestions?
Any
> >> favorable epoxies to look for?
> >>
> >>
> >>
> >
> >
>
>
They would have a fit over my machete I keep under my door rail then too!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> Don't let then catch you coming back over the border with those, Homeland
> Security in Detroit couldn't imagine why I might need a hatchet when
> wilderness camping.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >I would have to say JB weld also, or find you a good machine shop and
have
> >a
> > threaded insert made or just get them to make you a new shift **** to
fit.
> > Here is the one I had made for mine.
> > http://www.cantrell.com/scrap/shifter21.JPG
> > Tom
> >
> >
> > "Rusted" <noEmail@please.com> wrote in message
> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> Aluminum shift **** (that I like) with a crappy plastic shim so it fits
> >> generic shift levers. The plastic is not holding up, so I want to hit
> >> the
> >> hardware store for a nut that I can grind / shape to fit inside the
shift
> >> ****. Any suggestions on joining the nut to the inside of the **** so
> > that
> >> it stays put? I figured an epoxy will work, any other suggestions?
Any
> >> favorable epoxies to look for?
> >>
> >>
> >>
> >
> >
>
>
08-05-2005, 11:04 AM
#33
Guest
Posts: n/a
Re: Aluminum to Steel
Hey Billy Ray,
They would have a fit over my machete I keep under my door rail then too!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> Don't let then catch you coming back over the border with those, Homeland
> Security in Detroit couldn't imagine why I might need a hatchet when
> wilderness camping.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >I would have to say JB weld also, or find you a good machine shop and
have
> >a
> > threaded insert made or just get them to make you a new shift **** to
fit.
> > Here is the one I had made for mine.
> > http://www.cantrell.com/scrap/shifter21.JPG
> > Tom
> >
> >
> > "Rusted" <noEmail@please.com> wrote in message
> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> Aluminum shift **** (that I like) with a crappy plastic shim so it fits
> >> generic shift levers. The plastic is not holding up, so I want to hit
> >> the
> >> hardware store for a nut that I can grind / shape to fit inside the
shift
> >> ****. Any suggestions on joining the nut to the inside of the **** so
> > that
> >> it stays put? I figured an epoxy will work, any other suggestions?
Any
> >> favorable epoxies to look for?
> >>
> >>
> >>
> >
> >
>
>
They would have a fit over my machete I keep under my door rail then too!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> Don't let then catch you coming back over the border with those, Homeland
> Security in Detroit couldn't imagine why I might need a hatchet when
> wilderness camping.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >I would have to say JB weld also, or find you a good machine shop and
have
> >a
> > threaded insert made or just get them to make you a new shift **** to
fit.
> > Here is the one I had made for mine.
> > http://www.cantrell.com/scrap/shifter21.JPG
> > Tom
> >
> >
> > "Rusted" <noEmail@please.com> wrote in message
> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> Aluminum shift **** (that I like) with a crappy plastic shim so it fits
> >> generic shift levers. The plastic is not holding up, so I want to hit
> >> the
> >> hardware store for a nut that I can grind / shape to fit inside the
shift
> >> ****. Any suggestions on joining the nut to the inside of the **** so
> > that
> >> it stays put? I figured an epoxy will work, any other suggestions?
Any
> >> favorable epoxies to look for?
> >>
> >>
> >>
> >
> >
>
>
08-05-2005, 11:14 AM
#34
Guest
Posts: n/a
Re: Aluminum to Steel
Well..... you have me there, I did not get to use the hatchet as there was
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
08-05-2005, 11:14 AM
#35
Guest
Posts: n/a
Re: Aluminum to Steel
Well..... you have me there, I did not get to use the hatchet as there was
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
08-05-2005, 11:14 AM
#36
Guest
Posts: n/a
Re: Aluminum to Steel
Well..... you have me there, I did not get to use the hatchet as there was
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
08-05-2005, 11:14 AM
#37
Guest
Posts: n/a
Re: Aluminum to Steel
Well..... you have me there, I did not get to use the hatchet as there was
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
plenty of wood available cut by someone with a chain saw.
I don't think they would believe you when you explained to them the primers
had already been fired. There probably isn't a category exemption for
expended munitions and they would impound your shift **** after tossing your
Jeep and put you in the big computer as a potential raghead ---------/gun
runner/smuggler.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> Billy,
> If they take the time to look at it they will see that they have already
> been popped. Not to mention you would have to drill them out to get them
> out, as they are press fit in, and wont be coming out any to easy. (lol)
> And WHY would you need a hatchet? I mean really!! (LOL)
>
> Tom
>
>
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
>> Don't let then catch you coming back over the border with those, Homeland
>> Security in Detroit couldn't imagine why I might need a hatchet when
>> wilderness camping.
>>
>>
>> "cantrelm" <cantrelm@bellsouth.net> wrote in message
>> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
>> >I would have to say JB weld also, or find you a good machine shop and
> have
>> >a
>> > threaded insert made or just get them to make you a new shift **** to
> fit.
>> > Here is the one I had made for mine.
>> > http://www.cantrell.com/scrap/shifter21.JPG
>> > Tom
>> >
>> >
>> > "Rusted" <noEmail@please.com> wrote in message
>> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
>> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
>> >> fits
>> >> generic shift levers. The plastic is not holding up, so I want to hit
>> >> the
>> >> hardware store for a nut that I can grind / shape to fit inside the
> shift
>> >> ****. Any suggestions on joining the nut to the inside of the ****
>> >> so
>> > that
>> >> it stays put? I figured an epoxy will work, any other suggestions?
> Any
>> >> favorable epoxies to look for?
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
08-05-2005, 11:36 AM
#38
Guest
Posts: n/a
Re: Aluminum to Steel
Well that would be fine with me, I am sure I am already in one of those
computers somewhere as my brother-in-law is a State Senator, and I have
other relatives that work for unmentioned branches of the gov. Heck they
have probably had me on one of those computers since birth. So if they
don't have anything better to waste their time and money on then let them.
(LOL)
But they can't have the shifter!!!!!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> Well..... you have me there, I did not get to use the hatchet as there was
> plenty of wood available cut by someone with a chain saw.
>
> I don't think they would believe you when you explained to them the
primers
> had already been fired. There probably isn't a category exemption for
> expended munitions and they would impound your shift **** after tossing
your
> Jeep and put you in the big computer as a potential raghead ---------/gun
> runner/smuggler.
>
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> > Billy,
> > If they take the time to look at it they will see that they have already
> > been popped. Not to mention you would have to drill them out to get
them
> > out, as they are press fit in, and wont be coming out any to easy. (lol)
> > And WHY would you need a hatchet? I mean really!! (LOL)
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> Don't let then catch you coming back over the border with those,
Homeland
> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> wilderness camping.
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >I would have to say JB weld also, or find you a good machine shop and
> > have
> >> >a
> >> > threaded insert made or just get them to make you a new shift **** to
> > fit.
> >> > Here is the one I had made for mine.
> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> > Tom
> >> >
> >> >
> >> > "Rusted" <noEmail@please.com> wrote in message
> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
> >> >> fits
> >> >> generic shift levers. The plastic is not holding up, so I want to
hit
> >> >> the
> >> >> hardware store for a nut that I can grind / shape to fit inside the
> > shift
> >> >> ****. Any suggestions on joining the nut to the inside of the ****
> >> >> so
> >> > that
> >> >> it stays put? I figured an epoxy will work, any other suggestions?
> > Any
> >> >> favorable epoxies to look for?
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
computers somewhere as my brother-in-law is a State Senator, and I have
other relatives that work for unmentioned branches of the gov. Heck they
have probably had me on one of those computers since birth. So if they
don't have anything better to waste their time and money on then let them.
(LOL)
But they can't have the shifter!!!!!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> Well..... you have me there, I did not get to use the hatchet as there was
> plenty of wood available cut by someone with a chain saw.
>
> I don't think they would believe you when you explained to them the
primers
> had already been fired. There probably isn't a category exemption for
> expended munitions and they would impound your shift **** after tossing
your
> Jeep and put you in the big computer as a potential raghead ---------/gun
> runner/smuggler.
>
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> > Billy,
> > If they take the time to look at it they will see that they have already
> > been popped. Not to mention you would have to drill them out to get
them
> > out, as they are press fit in, and wont be coming out any to easy. (lol)
> > And WHY would you need a hatchet? I mean really!! (LOL)
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> Don't let then catch you coming back over the border with those,
Homeland
> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> wilderness camping.
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >I would have to say JB weld also, or find you a good machine shop and
> > have
> >> >a
> >> > threaded insert made or just get them to make you a new shift **** to
> > fit.
> >> > Here is the one I had made for mine.
> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> > Tom
> >> >
> >> >
> >> > "Rusted" <noEmail@please.com> wrote in message
> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
> >> >> fits
> >> >> generic shift levers. The plastic is not holding up, so I want to
hit
> >> >> the
> >> >> hardware store for a nut that I can grind / shape to fit inside the
> > shift
> >> >> ****. Any suggestions on joining the nut to the inside of the ****
> >> >> so
> >> > that
> >> >> it stays put? I figured an epoxy will work, any other suggestions?
> > Any
> >> >> favorable epoxies to look for?
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
08-05-2005, 11:36 AM
#39
Guest
Posts: n/a
Re: Aluminum to Steel
Well that would be fine with me, I am sure I am already in one of those
computers somewhere as my brother-in-law is a State Senator, and I have
other relatives that work for unmentioned branches of the gov. Heck they
have probably had me on one of those computers since birth. So if they
don't have anything better to waste their time and money on then let them.
(LOL)
But they can't have the shifter!!!!!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> Well..... you have me there, I did not get to use the hatchet as there was
> plenty of wood available cut by someone with a chain saw.
>
> I don't think they would believe you when you explained to them the
primers
> had already been fired. There probably isn't a category exemption for
> expended munitions and they would impound your shift **** after tossing
your
> Jeep and put you in the big computer as a potential raghead ---------/gun
> runner/smuggler.
>
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> > Billy,
> > If they take the time to look at it they will see that they have already
> > been popped. Not to mention you would have to drill them out to get
them
> > out, as they are press fit in, and wont be coming out any to easy. (lol)
> > And WHY would you need a hatchet? I mean really!! (LOL)
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> Don't let then catch you coming back over the border with those,
Homeland
> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> wilderness camping.
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >I would have to say JB weld also, or find you a good machine shop and
> > have
> >> >a
> >> > threaded insert made or just get them to make you a new shift **** to
> > fit.
> >> > Here is the one I had made for mine.
> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> > Tom
> >> >
> >> >
> >> > "Rusted" <noEmail@please.com> wrote in message
> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
> >> >> fits
> >> >> generic shift levers. The plastic is not holding up, so I want to
hit
> >> >> the
> >> >> hardware store for a nut that I can grind / shape to fit inside the
> > shift
> >> >> ****. Any suggestions on joining the nut to the inside of the ****
> >> >> so
> >> > that
> >> >> it stays put? I figured an epoxy will work, any other suggestions?
> > Any
> >> >> favorable epoxies to look for?
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
computers somewhere as my brother-in-law is a State Senator, and I have
other relatives that work for unmentioned branches of the gov. Heck they
have probably had me on one of those computers since birth. So if they
don't have anything better to waste their time and money on then let them.
(LOL)
But they can't have the shifter!!!!!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> Well..... you have me there, I did not get to use the hatchet as there was
> plenty of wood available cut by someone with a chain saw.
>
> I don't think they would believe you when you explained to them the
primers
> had already been fired. There probably isn't a category exemption for
> expended munitions and they would impound your shift **** after tossing
your
> Jeep and put you in the big computer as a potential raghead ---------/gun
> runner/smuggler.
>
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> > Billy,
> > If they take the time to look at it they will see that they have already
> > been popped. Not to mention you would have to drill them out to get
them
> > out, as they are press fit in, and wont be coming out any to easy. (lol)
> > And WHY would you need a hatchet? I mean really!! (LOL)
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> Don't let then catch you coming back over the border with those,
Homeland
> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> wilderness camping.
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >I would have to say JB weld also, or find you a good machine shop and
> > have
> >> >a
> >> > threaded insert made or just get them to make you a new shift **** to
> > fit.
> >> > Here is the one I had made for mine.
> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> > Tom
> >> >
> >> >
> >> > "Rusted" <noEmail@please.com> wrote in message
> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
> >> >> fits
> >> >> generic shift levers. The plastic is not holding up, so I want to
hit
> >> >> the
> >> >> hardware store for a nut that I can grind / shape to fit inside the
> > shift
> >> >> ****. Any suggestions on joining the nut to the inside of the ****
> >> >> so
> >> > that
> >> >> it stays put? I figured an epoxy will work, any other suggestions?
> > Any
> >> >> favorable epoxies to look for?
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
08-05-2005, 11:36 AM
#40
Guest
Posts: n/a
Re: Aluminum to Steel
Well that would be fine with me, I am sure I am already in one of those
computers somewhere as my brother-in-law is a State Senator, and I have
other relatives that work for unmentioned branches of the gov. Heck they
have probably had me on one of those computers since birth. So if they
don't have anything better to waste their time and money on then let them.
(LOL)
But they can't have the shifter!!!!!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> Well..... you have me there, I did not get to use the hatchet as there was
> plenty of wood available cut by someone with a chain saw.
>
> I don't think they would believe you when you explained to them the
primers
> had already been fired. There probably isn't a category exemption for
> expended munitions and they would impound your shift **** after tossing
your
> Jeep and put you in the big computer as a potential raghead ---------/gun
> runner/smuggler.
>
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> > Billy,
> > If they take the time to look at it they will see that they have already
> > been popped. Not to mention you would have to drill them out to get
them
> > out, as they are press fit in, and wont be coming out any to easy. (lol)
> > And WHY would you need a hatchet? I mean really!! (LOL)
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> Don't let then catch you coming back over the border with those,
Homeland
> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> wilderness camping.
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >I would have to say JB weld also, or find you a good machine shop and
> > have
> >> >a
> >> > threaded insert made or just get them to make you a new shift **** to
> > fit.
> >> > Here is the one I had made for mine.
> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> > Tom
> >> >
> >> >
> >> > "Rusted" <noEmail@please.com> wrote in message
> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
> >> >> fits
> >> >> generic shift levers. The plastic is not holding up, so I want to
hit
> >> >> the
> >> >> hardware store for a nut that I can grind / shape to fit inside the
> > shift
> >> >> ****. Any suggestions on joining the nut to the inside of the ****
> >> >> so
> >> > that
> >> >> it stays put? I figured an epoxy will work, any other suggestions?
> > Any
> >> >> favorable epoxies to look for?
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
computers somewhere as my brother-in-law is a State Senator, and I have
other relatives that work for unmentioned branches of the gov. Heck they
have probably had me on one of those computers since birth. So if they
don't have anything better to waste their time and money on then let them.
(LOL)
But they can't have the shifter!!!!!!!
Tom
"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92e21$42f38280$42a1cc8c$32091@FUSE.NET...
> Well..... you have me there, I did not get to use the hatchet as there was
> plenty of wood available cut by someone with a chain saw.
>
> I don't think they would believe you when you explained to them the
primers
> had already been fired. There probably isn't a category exemption for
> expended munitions and they would impound your shift **** after tossing
your
> Jeep and put you in the big computer as a potential raghead ---------/gun
> runner/smuggler.
>
>
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:bbLIe.10143$hp.3827@bignews4.bellsouth.net...
> > Billy,
> > If they take the time to look at it they will see that they have already
> > been popped. Not to mention you would have to drill them out to get
them
> > out, as they are press fit in, and wont be coming out any to easy. (lol)
> > And WHY would you need a hatchet? I mean really!! (LOL)
> >
> > Tom
> >
> >
> > "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> > news:f0b84$42f37ab8$42a1cc8c$31281@FUSE.NET...
> >> Don't let then catch you coming back over the border with those,
Homeland
> >> Security in Detroit couldn't imagine why I might need a hatchet when
> >> wilderness camping.
> >>
> >>
> >> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> >> news:EqKIe.6013$%X1.380@bignews1.bellsouth.net...
> >> >I would have to say JB weld also, or find you a good machine shop and
> > have
> >> >a
> >> > threaded insert made or just get them to make you a new shift **** to
> > fit.
> >> > Here is the one I had made for mine.
> >> > http://www.cantrell.com/scrap/shifter21.JPG
> >> > Tom
> >> >
> >> >
> >> > "Rusted" <noEmail@please.com> wrote in message
> >> > news:lJwHe.11331$N21.5934@fe01.usenetserver.com...
> >> >> Aluminum shift **** (that I like) with a crappy plastic shim so it
> >> >> fits
> >> >> generic shift levers. The plastic is not holding up, so I want to
hit
> >> >> the
> >> >> hardware store for a nut that I can grind / shape to fit inside the
> > shift
> >> >> ****. Any suggestions on joining the nut to the inside of the ****
> >> >> so
> >> > that
> >> >> it stays put? I figured an epoxy will work, any other suggestions?
> > Any
> >> >> favorable epoxies to look for?
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>