Aluminum Radiator 2000TJ?
10-02-2004, 06:24 PM
#2
Guest
Posts: n/a
Re: Aluminum Radiator 2000TJ?
bushman did pass the time by typing:
> Need recommendations for a new radiator for my 2KTJ. I would like to upgrade
> for a future HP increase. Any practical experiences shared are most welcome.
> Thanks
FWIW,
A bigger radiator won't help unless your after some serious increases.
Bigger radiators are better for running in hot climates or where your
moving slowly for extended periods of time under moderate to heavy engine
use. (like rock crawling)
The best reason to go with a all metal rad is to get away from the plastic
side tanks before they leak.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Need recommendations for a new radiator for my 2KTJ. I would like to upgrade
> for a future HP increase. Any practical experiences shared are most welcome.
> Thanks
FWIW,
A bigger radiator won't help unless your after some serious increases.
Bigger radiators are better for running in hot climates or where your
moving slowly for extended periods of time under moderate to heavy engine
use. (like rock crawling)
The best reason to go with a all metal rad is to get away from the plastic
side tanks before they leak.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
10-02-2004, 06:24 PM
#3
Guest
Posts: n/a
Re: Aluminum Radiator 2000TJ?
bushman did pass the time by typing:
> Need recommendations for a new radiator for my 2KTJ. I would like to upgrade
> for a future HP increase. Any practical experiences shared are most welcome.
> Thanks
FWIW,
A bigger radiator won't help unless your after some serious increases.
Bigger radiators are better for running in hot climates or where your
moving slowly for extended periods of time under moderate to heavy engine
use. (like rock crawling)
The best reason to go with a all metal rad is to get away from the plastic
side tanks before they leak.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Need recommendations for a new radiator for my 2KTJ. I would like to upgrade
> for a future HP increase. Any practical experiences shared are most welcome.
> Thanks
FWIW,
A bigger radiator won't help unless your after some serious increases.
Bigger radiators are better for running in hot climates or where your
moving slowly for extended periods of time under moderate to heavy engine
use. (like rock crawling)
The best reason to go with a all metal rad is to get away from the plastic
side tanks before they leak.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
10-02-2004, 06:24 PM
#4
Guest
Posts: n/a
Re: Aluminum Radiator 2000TJ?
bushman did pass the time by typing:
> Need recommendations for a new radiator for my 2KTJ. I would like to upgrade
> for a future HP increase. Any practical experiences shared are most welcome.
> Thanks
FWIW,
A bigger radiator won't help unless your after some serious increases.
Bigger radiators are better for running in hot climates or where your
moving slowly for extended periods of time under moderate to heavy engine
use. (like rock crawling)
The best reason to go with a all metal rad is to get away from the plastic
side tanks before they leak.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Need recommendations for a new radiator for my 2KTJ. I would like to upgrade
> for a future HP increase. Any practical experiences shared are most welcome.
> Thanks
FWIW,
A bigger radiator won't help unless your after some serious increases.
Bigger radiators are better for running in hot climates or where your
moving slowly for extended periods of time under moderate to heavy engine
use. (like rock crawling)
The best reason to go with a all metal rad is to get away from the plastic
side tanks before they leak.
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
10-04-2004, 07:50 PM
#8
Guest
Posts: n/a
Re: Aluminum Radiator 2000TJ?
My news server sux. This is the only post I can view ref my radiator
question. were there more post? What is the consensus on the best all
aluminum welded radiator?
Thanks again.
Allen
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cjpdcr09iu@enews4.newsguy.com...
> > The best reason to go with a all metal rad is to get away from the
plastic
> > side tanks before they leak.<
>
> Amen. The gaskets all eventually let go. Lets hear it for weight savings
and
> cost cutting!
>
>
question. were there more post? What is the consensus on the best all
aluminum welded radiator?
Thanks again.
Allen
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cjpdcr09iu@enews4.newsguy.com...
> > The best reason to go with a all metal rad is to get away from the
plastic
> > side tanks before they leak.<
>
> Amen. The gaskets all eventually let go. Lets hear it for weight savings
and
> cost cutting!
>
>
10-04-2004, 07:50 PM
#9
Guest
Posts: n/a
Re: Aluminum Radiator 2000TJ?
My news server sux. This is the only post I can view ref my radiator
question. were there more post? What is the consensus on the best all
aluminum welded radiator?
Thanks again.
Allen
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cjpdcr09iu@enews4.newsguy.com...
> > The best reason to go with a all metal rad is to get away from the
plastic
> > side tanks before they leak.<
>
> Amen. The gaskets all eventually let go. Lets hear it for weight savings
and
> cost cutting!
>
>
question. were there more post? What is the consensus on the best all
aluminum welded radiator?
Thanks again.
Allen
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cjpdcr09iu@enews4.newsguy.com...
> > The best reason to go with a all metal rad is to get away from the
plastic
> > side tanks before they leak.<
>
> Amen. The gaskets all eventually let go. Lets hear it for weight savings
and
> cost cutting!
>
>
10-04-2004, 07:50 PM
#10
Guest
Posts: n/a
Re: Aluminum Radiator 2000TJ?
My news server sux. This is the only post I can view ref my radiator
question. were there more post? What is the consensus on the best all
aluminum welded radiator?
Thanks again.
Allen
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cjpdcr09iu@enews4.newsguy.com...
> > The best reason to go with a all metal rad is to get away from the
plastic
> > side tanks before they leak.<
>
> Amen. The gaskets all eventually let go. Lets hear it for weight savings
and
> cost cutting!
>
>
question. were there more post? What is the consensus on the best all
aluminum welded radiator?
Thanks again.
Allen
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:cjpdcr09iu@enews4.newsguy.com...
> > The best reason to go with a all metal rad is to get away from the
plastic
> > side tanks before they leak.<
>
> Amen. The gaskets all eventually let go. Lets hear it for weight savings
and
> cost cutting!
>
>