|
Re: Aluminum Dana 44
My son in law has an '03 with the factory towing package and, I am assuming,
a Dana 44a in the back. "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:44696433.71B47DC7@cox.net... > And the fact that you own an '02 WJ with a 35. > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > billy ray wrote: >> >> Yes, >> >> As you may recall my original questions were: >> "What is the real story with the Aluminum Dana 44 differential? >> Just how strong (or weak) is it? >> Does it have maintenance and reliability problems?" >> >> I am just trying to get an reply that answer them.... |
Re: Aluminum Dana 44
My son in law has an '03 with the factory towing package and, I am assuming,
a Dana 44a in the back. "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:44696433.71B47DC7@cox.net... > And the fact that you own an '02 WJ with a 35. > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > billy ray wrote: >> >> Yes, >> >> As you may recall my original questions were: >> "What is the real story with the Aluminum Dana 44 differential? >> Just how strong (or weak) is it? >> Does it have maintenance and reliability problems?" >> >> I am just trying to get an reply that answer them.... |
Re: Aluminum Dana 44
My son in law has an '03 with the factory towing package and, I am assuming,
a Dana 44a in the back. "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:44696433.71B47DC7@cox.net... > And the fact that you own an '02 WJ with a 35. > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > billy ray wrote: >> >> Yes, >> >> As you may recall my original questions were: >> "What is the real story with the Aluminum Dana 44 differential? >> Just how strong (or weak) is it? >> Does it have maintenance and reliability problems?" >> >> I am just trying to get an reply that answer them.... |
Re: Aluminum Dana 44
If you want to put something over on your son in law, just tell your
daughter he's no good. No need to confuse the issue with facts. ;^) Earle "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message news:75ec0$4469cc1a$48311525$13706@FUSE.NET... > My son in law has an '03 with the factory towing package and, I am assuming, > a Dana 44a in the back. > > "L.W.(Bill) ------ III" <----------@cox.net> wrote in message > news:44696433.71B47DC7@cox.net... > > And the fact that you own an '02 WJ with a 35. > > God Bless America, Bill O|||||||O > > mailto:-------------------- http://www.----------.com/ > > > > billy ray wrote: > >> > >> Yes, > >> > >> As you may recall my original questions were: > >> "What is the real story with the Aluminum Dana 44 differential? > >> Just how strong (or weak) is it? > >> Does it have maintenance and reliability problems?" > >> > >> I am just trying to get an reply that answer them.... > > |
Re: Aluminum Dana 44
If you want to put something over on your son in law, just tell your
daughter he's no good. No need to confuse the issue with facts. ;^) Earle "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message news:75ec0$4469cc1a$48311525$13706@FUSE.NET... > My son in law has an '03 with the factory towing package and, I am assuming, > a Dana 44a in the back. > > "L.W.(Bill) ------ III" <----------@cox.net> wrote in message > news:44696433.71B47DC7@cox.net... > > And the fact that you own an '02 WJ with a 35. > > God Bless America, Bill O|||||||O > > mailto:-------------------- http://www.----------.com/ > > > > billy ray wrote: > >> > >> Yes, > >> > >> As you may recall my original questions were: > >> "What is the real story with the Aluminum Dana 44 differential? > >> Just how strong (or weak) is it? > >> Does it have maintenance and reliability problems?" > >> > >> I am just trying to get an reply that answer them.... > > |
Re: Aluminum Dana 44
If you want to put something over on your son in law, just tell your
daughter he's no good. No need to confuse the issue with facts. ;^) Earle "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message news:75ec0$4469cc1a$48311525$13706@FUSE.NET... > My son in law has an '03 with the factory towing package and, I am assuming, > a Dana 44a in the back. > > "L.W.(Bill) ------ III" <----------@cox.net> wrote in message > news:44696433.71B47DC7@cox.net... > > And the fact that you own an '02 WJ with a 35. > > God Bless America, Bill O|||||||O > > mailto:-------------------- http://www.----------.com/ > > > > billy ray wrote: > >> > >> Yes, > >> > >> As you may recall my original questions were: > >> "What is the real story with the Aluminum Dana 44 differential? > >> Just how strong (or weak) is it? > >> Does it have maintenance and reliability problems?" > >> > >> I am just trying to get an reply that answer them.... > > |
Re: Aluminum Dana 44
I guess I should not be surprised........ When the topic is something
ridiculous there are no limits on the number of people who are willing to pass on whatever information they may have but a serious topic.... well... You have seen the replies... "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > If you want to put something over on your son in law, just tell your > daughter he's no good. No need to confuse the issue with facts. ;^) > > Earle > > "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> My son in law has an '03 with the factory towing package and, I am > assuming, >> a Dana 44a in the back. >> >> "L.W.(Bill) ------ III" <----------@cox.net> wrote in message >> news:44696433.71B47DC7@cox.net... >> > And the fact that you own an '02 WJ with a 35. >> > God Bless America, Bill O|||||||O >> > mailto:-------------------- http://www.----------.com/ >> > >> > billy ray wrote: >> >> >> >> Yes, >> >> >> >> As you may recall my original questions were: >> >> "What is the real story with the Aluminum Dana 44 differential? >> >> Just how strong (or weak) is it? >> >> Does it have maintenance and reliability problems?" >> >> >> >> I am just trying to get an reply that answer them.... >> >> > > |
Re: Aluminum Dana 44
I guess I should not be surprised........ When the topic is something
ridiculous there are no limits on the number of people who are willing to pass on whatever information they may have but a serious topic.... well... You have seen the replies... "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > If you want to put something over on your son in law, just tell your > daughter he's no good. No need to confuse the issue with facts. ;^) > > Earle > > "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> My son in law has an '03 with the factory towing package and, I am > assuming, >> a Dana 44a in the back. >> >> "L.W.(Bill) ------ III" <----------@cox.net> wrote in message >> news:44696433.71B47DC7@cox.net... >> > And the fact that you own an '02 WJ with a 35. >> > God Bless America, Bill O|||||||O >> > mailto:-------------------- http://www.----------.com/ >> > >> > billy ray wrote: >> >> >> >> Yes, >> >> >> >> As you may recall my original questions were: >> >> "What is the real story with the Aluminum Dana 44 differential? >> >> Just how strong (or weak) is it? >> >> Does it have maintenance and reliability problems?" >> >> >> >> I am just trying to get an reply that answer them.... >> >> > > |
Re: Aluminum Dana 44
I guess I should not be surprised........ When the topic is something
ridiculous there are no limits on the number of people who are willing to pass on whatever information they may have but a serious topic.... well... You have seen the replies... "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > If you want to put something over on your son in law, just tell your > daughter he's no good. No need to confuse the issue with facts. ;^) > > Earle > > "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> My son in law has an '03 with the factory towing package and, I am > assuming, >> a Dana 44a in the back. >> >> "L.W.(Bill) ------ III" <----------@cox.net> wrote in message >> news:44696433.71B47DC7@cox.net... >> > And the fact that you own an '02 WJ with a 35. >> > God Bless America, Bill O|||||||O >> > mailto:-------------------- http://www.----------.com/ >> > >> > billy ray wrote: >> >> >> >> Yes, >> >> >> >> As you may recall my original questions were: >> >> "What is the real story with the Aluminum Dana 44 differential? >> >> Just how strong (or weak) is it? >> >> Does it have maintenance and reliability problems?" >> >> >> >> I am just trying to get an reply that answer them.... >> >> > > |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different axles that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different axles that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different axles that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different axlesGrand Cherokees that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different axlesGrand Cherokees that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different axlesGrand Cherokees that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different Grand Cherokees that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different Grand Cherokees that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
You got several replies from an owner of the specific axle you asked
about, me, and I gave you my actual real experiences with it. I also let you know that I had bad experiences with it in two different Grand Cherokees that used the exact same axle you asked about. You apparently didn't like my real world experience with it so I guess you only wanted positive experiences. I now feel like the time I spent sharing what I thought was help real-world experiences with you was a 100% waste of my time. Most people are a bit more appreciative when they receive thoughtful answers. What a waste of my time. billy ray wrote: > I guess I should not be surprised........ When the topic is something > ridiculous there are no limits on the number of people who are willing to > pass on whatever information they may have but a serious topic.... well... > You have seen the replies... > > > "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >>If you want to put something over on your son in law, just tell your >>daughter he's no good. No need to confuse the issue with facts. ;^) >> >>Earle >> >>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>news:75ec0$4469cc1a$48311525$13706@FUSE.NET... >> >>>My son in law has an '03 with the factory towing package and, I am >> >>assuming, >> >>>a Dana 44a in the back. >>> >>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>news:44696433.71B47DC7@cox.net... >>> >>>> And the fact that you own an '02 WJ with a 35. >>>> God Bless America, Bill O|||||||O >>>>mailto:-------------------- http://www.----------.com/ >>>> >>>>billy ray wrote: >>>> >>>>>Yes, >>>>> >>>>>As you may recall my original questions were: >>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>Just how strong (or weak) is it? >>>>>Does it have maintenance and reliability problems?" >>>>> >>>>>I am just trying to get an reply that answer them.... >>> >>> >> > > -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
Jerry, Your reply was the only one that actually relayed useful and direct
information about the durability of the 44a. The only reply I received that was directed toward a direct comparison of the 35c and 44a was that the rear end of your WJ can be jacked if you have the 35c and not if you have the 44a. I asked because I wanted to know what the real world experiences have been and it seems that the failure rate of the 44a in normal street usage, in respect to the active posters on this newsgroup, is 100%. If this the case then why is it used over the 35c which is, at least, suitable for street and mild off-road use? I assume it is not cheaper to manufacture because then it would be used in all WJs. "Jerry Bransford" <jerrypb@cox.net> wrote in message news:Mzxag.532$sP1.151@fed1read07... > You got several replies from an owner of the specific axle you asked > about, me, and I gave you my actual real experiences with it. I also let > you know that I had bad experiences with it in two different Grand > Cherokees that used the exact same axle you asked about. You apparently > didn't like my real world experience with it so I guess you only wanted > positive experiences. I now feel like the time I spent sharing what I > thought was help real-world experiences with you was a 100% waste of my > time. Most people are a bit more appreciative when they receive > thoughtful answers. What a waste of my time. > > billy ray wrote: >> I guess I should not be surprised........ When the topic is something >> ridiculous there are no limits on the number of people who are willing to >> pass on whatever information they may have but a serious topic.... >> well... You have seen the replies... >> >> >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... >> >>>If you want to put something over on your son in law, just tell your >>>daughter he's no good. No need to confuse the issue with facts. ;^) >>> >>>Earle >>> >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . >>> >>>>My son in law has an '03 with the factory towing package and, I am >>> >>>assuming, >>> >>>>a Dana 44a in the back. >>>> >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>>news:44696433.71B47DC7@cox.net... >>>> >>>>> And the fact that you own an '02 WJ with a 35. >>>>> God Bless America, Bill O|||||||O >>>>>mailto:-------------------- http://www.----------.com/ >>>>> >>>>>billy ray wrote: >>>>> >>>>>>Yes, >>>>>> >>>>>>As you may recall my original questions were: >>>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>>Just how strong (or weak) is it? >>>>>>Does it have maintenance and reliability problems?" >>>>>> >>>>>>I am just trying to get an reply that answer them.... >>>> >>>> >>> >> >> > > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
Jerry, Your reply was the only one that actually relayed useful and direct
information about the durability of the 44a. The only reply I received that was directed toward a direct comparison of the 35c and 44a was that the rear end of your WJ can be jacked if you have the 35c and not if you have the 44a. I asked because I wanted to know what the real world experiences have been and it seems that the failure rate of the 44a in normal street usage, in respect to the active posters on this newsgroup, is 100%. If this the case then why is it used over the 35c which is, at least, suitable for street and mild off-road use? I assume it is not cheaper to manufacture because then it would be used in all WJs. "Jerry Bransford" <jerrypb@cox.net> wrote in message news:Mzxag.532$sP1.151@fed1read07... > You got several replies from an owner of the specific axle you asked > about, me, and I gave you my actual real experiences with it. I also let > you know that I had bad experiences with it in two different Grand > Cherokees that used the exact same axle you asked about. You apparently > didn't like my real world experience with it so I guess you only wanted > positive experiences. I now feel like the time I spent sharing what I > thought was help real-world experiences with you was a 100% waste of my > time. Most people are a bit more appreciative when they receive > thoughtful answers. What a waste of my time. > > billy ray wrote: >> I guess I should not be surprised........ When the topic is something >> ridiculous there are no limits on the number of people who are willing to >> pass on whatever information they may have but a serious topic.... >> well... You have seen the replies... >> >> >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... >> >>>If you want to put something over on your son in law, just tell your >>>daughter he's no good. No need to confuse the issue with facts. ;^) >>> >>>Earle >>> >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . >>> >>>>My son in law has an '03 with the factory towing package and, I am >>> >>>assuming, >>> >>>>a Dana 44a in the back. >>>> >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>>news:44696433.71B47DC7@cox.net... >>>> >>>>> And the fact that you own an '02 WJ with a 35. >>>>> God Bless America, Bill O|||||||O >>>>>mailto:-------------------- http://www.----------.com/ >>>>> >>>>>billy ray wrote: >>>>> >>>>>>Yes, >>>>>> >>>>>>As you may recall my original questions were: >>>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>>Just how strong (or weak) is it? >>>>>>Does it have maintenance and reliability problems?" >>>>>> >>>>>>I am just trying to get an reply that answer them.... >>>> >>>> >>> >> >> > > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
Jerry, Your reply was the only one that actually relayed useful and direct
information about the durability of the 44a. The only reply I received that was directed toward a direct comparison of the 35c and 44a was that the rear end of your WJ can be jacked if you have the 35c and not if you have the 44a. I asked because I wanted to know what the real world experiences have been and it seems that the failure rate of the 44a in normal street usage, in respect to the active posters on this newsgroup, is 100%. If this the case then why is it used over the 35c which is, at least, suitable for street and mild off-road use? I assume it is not cheaper to manufacture because then it would be used in all WJs. "Jerry Bransford" <jerrypb@cox.net> wrote in message news:Mzxag.532$sP1.151@fed1read07... > You got several replies from an owner of the specific axle you asked > about, me, and I gave you my actual real experiences with it. I also let > you know that I had bad experiences with it in two different Grand > Cherokees that used the exact same axle you asked about. You apparently > didn't like my real world experience with it so I guess you only wanted > positive experiences. I now feel like the time I spent sharing what I > thought was help real-world experiences with you was a 100% waste of my > time. Most people are a bit more appreciative when they receive > thoughtful answers. What a waste of my time. > > billy ray wrote: >> I guess I should not be surprised........ When the topic is something >> ridiculous there are no limits on the number of people who are willing to >> pass on whatever information they may have but a serious topic.... >> well... You have seen the replies... >> >> >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... >> >>>If you want to put something over on your son in law, just tell your >>>daughter he's no good. No need to confuse the issue with facts. ;^) >>> >>>Earle >>> >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . >>> >>>>My son in law has an '03 with the factory towing package and, I am >>> >>>assuming, >>> >>>>a Dana 44a in the back. >>>> >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message >>>>news:44696433.71B47DC7@cox.net... >>>> >>>>> And the fact that you own an '02 WJ with a 35. >>>>> God Bless America, Bill O|||||||O >>>>>mailto:-------------------- http://www.----------.com/ >>>>> >>>>>billy ray wrote: >>>>> >>>>>>Yes, >>>>>> >>>>>>As you may recall my original questions were: >>>>>>"What is the real story with the Aluminum Dana 44 differential? >>>>>>Just how strong (or weak) is it? >>>>>>Does it have maintenance and reliability problems?" >>>>>> >>>>>>I am just trying to get an reply that answer them.... >>>> >>>> >>> >> >> > > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ |
Re: Aluminum Dana 44
To correct your assumption, Daimler's nazis made the decision
several years ago to destroy the Jeep name that won the war, and destroyed their mother land. With the four door, short wheel base, they are right on course. Sieg Heil! God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ billy ray wrote: > > Jerry, Your reply was the only one that actually relayed useful and direct > information about the durability of the 44a. > > The only reply I received that was directed toward a direct comparison of > the 35c and 44a was that the rear end of your WJ can be jacked if you have > the 35c and not if you have the 44a. > > I asked because I wanted to know what the real world experiences have been > and it seems that the failure rate of the 44a in normal street usage, in > respect to the active posters on this newsgroup, is 100%. > > If this the case then why is it used over the 35c which is, at least, > suitable for street and mild off-road use? > > I assume it is not cheaper to manufacture because then it would be used in > all WJs. |
Re: Aluminum Dana 44
To correct your assumption, Daimler's nazis made the decision
several years ago to destroy the Jeep name that won the war, and destroyed their mother land. With the four door, short wheel base, they are right on course. Sieg Heil! God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ billy ray wrote: > > Jerry, Your reply was the only one that actually relayed useful and direct > information about the durability of the 44a. > > The only reply I received that was directed toward a direct comparison of > the 35c and 44a was that the rear end of your WJ can be jacked if you have > the 35c and not if you have the 44a. > > I asked because I wanted to know what the real world experiences have been > and it seems that the failure rate of the 44a in normal street usage, in > respect to the active posters on this newsgroup, is 100%. > > If this the case then why is it used over the 35c which is, at least, > suitable for street and mild off-road use? > > I assume it is not cheaper to manufacture because then it would be used in > all WJs. |
Re: Aluminum Dana 44
To correct your assumption, Daimler's nazis made the decision
several years ago to destroy the Jeep name that won the war, and destroyed their mother land. With the four door, short wheel base, they are right on course. Sieg Heil! God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ billy ray wrote: > > Jerry, Your reply was the only one that actually relayed useful and direct > information about the durability of the 44a. > > The only reply I received that was directed toward a direct comparison of > the 35c and 44a was that the rear end of your WJ can be jacked if you have > the 35c and not if you have the 44a. > > I asked because I wanted to know what the real world experiences have been > and it seems that the failure rate of the 44a in normal street usage, in > respect to the active posters on this newsgroup, is 100%. > > If this the case then why is it used over the 35c which is, at least, > suitable for street and mild off-road use? > > I assume it is not cheaper to manufacture because then it would be used in > all WJs. |
Re: Aluminum Dana 44
Bill:
The Nazis called their country the father land. The Russians called their country the mother land. Tom "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:446ACE33.EE2BA245@cox.net... > To correct your assumption, Daimler's nazis made the decision > several years ago to destroy the Jeep name that won the war, and > destroyed their mother land. With the four door, short wheel base, they > are right on course. Sieg Heil! > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > |
Re: Aluminum Dana 44
Bill:
The Nazis called their country the father land. The Russians called their country the mother land. Tom "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:446ACE33.EE2BA245@cox.net... > To correct your assumption, Daimler's nazis made the decision > several years ago to destroy the Jeep name that won the war, and > destroyed their mother land. With the four door, short wheel base, they > are right on course. Sieg Heil! > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > |
Re: Aluminum Dana 44
Bill:
The Nazis called their country the father land. The Russians called their country the mother land. Tom "L.W.(Bill) ------ III" <----------@cox.net> wrote in message news:446ACE33.EE2BA245@cox.net... > To correct your assumption, Daimler's nazis made the decision > several years ago to destroy the Jeep name that won the war, and > destroyed their mother land. With the four door, short wheel base, they > are right on course. Sieg Heil! > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > |
Re: Aluminum Dana 44
Because, Billy Ray, perception is reality. The 44 or 44a has a bigger ring
gear, and a higher model number, so it must be the better axle. It just must be. Back in the real world, posters here have reported that the 35c is not up to the abuse that a 4.0 liter engine can dish out. One fellow that I am thinking of reported, that he only subjected it to "street and mild off-road use", but he is a member of the Mile High Jeepers Club, uh huh. Those guys never abuse equipment. Then there is Bill's page, with all the axle shafts pulled out and the hokey rendition of "Lucille". I am thinking that the 35c is pretty evenly matched with the 2.5 liter fuel injected engine that I have, or the wimpy 258 cid carbureted engine in Mike's CJ7 ;^), but it is not for V8 use or towing. According to Jerry's excellent post, to which you failed to render sufficient homage, the 44a isn't either. Earle "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message news:de194$446aac84$48311525$29794@FUSE.NET... > Jerry, Your reply was the only one that actually relayed useful and direct > information about the durability of the 44a. > > The only reply I received that was directed toward a direct comparison of > the 35c and 44a was that the rear end of your WJ can be jacked if you have > the 35c and not if you have the 44a. > > I asked because I wanted to know what the real world experiences have been > and it seems that the failure rate of the 44a in normal street usage, in > respect to the active posters on this newsgroup, is 100%. > > If this the case then why is it used over the 35c which is, at least, > suitable for street and mild off-road use? > > I assume it is not cheaper to manufacture because then it would be used in > all WJs. > > > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:Mzxag.532$sP1.151@fed1read07... > > You got several replies from an owner of the specific axle you asked > > about, me, and I gave you my actual real experiences with it. I also let > > you know that I had bad experiences with it in two different Grand > > Cherokees that used the exact same axle you asked about. You apparently > > didn't like my real world experience with it so I guess you only wanted > > positive experiences. I now feel like the time I spent sharing what I > > thought was help real-world experiences with you was a 100% waste of my > > time. Most people are a bit more appreciative when they receive > > thoughtful answers. What a waste of my time. > > > > billy ray wrote: > >> I guess I should not be surprised........ When the topic is something > >> ridiculous there are no limits on the number of people who are willing to > >> pass on whatever information they may have but a serious topic.... > >> well... You have seen the replies... > >> > >> > >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >> > >>>If you want to put something over on your son in law, just tell your > >>>daughter he's no good. No need to confuse the issue with facts. ;^) > >>> > >>>Earle > >>> > >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . > >>> > >>>>My son in law has an '03 with the factory towing package and, I am > >>> > >>>assuming, > >>> > >>>>a Dana 44a in the back. > >>>> > >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message > >>>>news:44696433.71B47DC7@cox.net... > >>>> > >>>>> And the fact that you own an '02 WJ with a 35. > >>>>> God Bless America, Bill O|||||||O > >>>>>mailto:-------------------- http://www.----------.com/ > >>>>> > >>>>>billy ray wrote: > >>>>> > >>>>>>Yes, > >>>>>> > >>>>>>As you may recall my original questions were: > >>>>>>"What is the real story with the Aluminum Dana 44 differential? > >>>>>>Just how strong (or weak) is it? > >>>>>>Does it have maintenance and reliability problems?" > >>>>>> > >>>>>>I am just trying to get an reply that answer them.... > >>>> > >>>> > >>> > >> > >> > > > > -- > > Jerry Bransford > > PP-ASEL N6TAY > > See the Geezer Jeep at > > http://members.cox.net/jerrypb/ > > *** Posted via a free Usenet account from http://www.teranews.com *** |
Re: Aluminum Dana 44
Because, Billy Ray, perception is reality. The 44 or 44a has a bigger ring
gear, and a higher model number, so it must be the better axle. It just must be. Back in the real world, posters here have reported that the 35c is not up to the abuse that a 4.0 liter engine can dish out. One fellow that I am thinking of reported, that he only subjected it to "street and mild off-road use", but he is a member of the Mile High Jeepers Club, uh huh. Those guys never abuse equipment. Then there is Bill's page, with all the axle shafts pulled out and the hokey rendition of "Lucille". I am thinking that the 35c is pretty evenly matched with the 2.5 liter fuel injected engine that I have, or the wimpy 258 cid carbureted engine in Mike's CJ7 ;^), but it is not for V8 use or towing. According to Jerry's excellent post, to which you failed to render sufficient homage, the 44a isn't either. Earle "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message news:de194$446aac84$48311525$29794@FUSE.NET... > Jerry, Your reply was the only one that actually relayed useful and direct > information about the durability of the 44a. > > The only reply I received that was directed toward a direct comparison of > the 35c and 44a was that the rear end of your WJ can be jacked if you have > the 35c and not if you have the 44a. > > I asked because I wanted to know what the real world experiences have been > and it seems that the failure rate of the 44a in normal street usage, in > respect to the active posters on this newsgroup, is 100%. > > If this the case then why is it used over the 35c which is, at least, > suitable for street and mild off-road use? > > I assume it is not cheaper to manufacture because then it would be used in > all WJs. > > > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:Mzxag.532$sP1.151@fed1read07... > > You got several replies from an owner of the specific axle you asked > > about, me, and I gave you my actual real experiences with it. I also let > > you know that I had bad experiences with it in two different Grand > > Cherokees that used the exact same axle you asked about. You apparently > > didn't like my real world experience with it so I guess you only wanted > > positive experiences. I now feel like the time I spent sharing what I > > thought was help real-world experiences with you was a 100% waste of my > > time. Most people are a bit more appreciative when they receive > > thoughtful answers. What a waste of my time. > > > > billy ray wrote: > >> I guess I should not be surprised........ When the topic is something > >> ridiculous there are no limits on the number of people who are willing to > >> pass on whatever information they may have but a serious topic.... > >> well... You have seen the replies... > >> > >> > >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >> > >>>If you want to put something over on your son in law, just tell your > >>>daughter he's no good. No need to confuse the issue with facts. ;^) > >>> > >>>Earle > >>> > >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . > >>> > >>>>My son in law has an '03 with the factory towing package and, I am > >>> > >>>assuming, > >>> > >>>>a Dana 44a in the back. > >>>> > >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message > >>>>news:44696433.71B47DC7@cox.net... > >>>> > >>>>> And the fact that you own an '02 WJ with a 35. > >>>>> God Bless America, Bill O|||||||O > >>>>>mailto:-------------------- http://www.----------.com/ > >>>>> > >>>>>billy ray wrote: > >>>>> > >>>>>>Yes, > >>>>>> > >>>>>>As you may recall my original questions were: > >>>>>>"What is the real story with the Aluminum Dana 44 differential? > >>>>>>Just how strong (or weak) is it? > >>>>>>Does it have maintenance and reliability problems?" > >>>>>> > >>>>>>I am just trying to get an reply that answer them.... > >>>> > >>>> > >>> > >> > >> > > > > -- > > Jerry Bransford > > PP-ASEL N6TAY > > See the Geezer Jeep at > > http://members.cox.net/jerrypb/ > > *** Posted via a free Usenet account from http://www.teranews.com *** |
Re: Aluminum Dana 44
Because, Billy Ray, perception is reality. The 44 or 44a has a bigger ring
gear, and a higher model number, so it must be the better axle. It just must be. Back in the real world, posters here have reported that the 35c is not up to the abuse that a 4.0 liter engine can dish out. One fellow that I am thinking of reported, that he only subjected it to "street and mild off-road use", but he is a member of the Mile High Jeepers Club, uh huh. Those guys never abuse equipment. Then there is Bill's page, with all the axle shafts pulled out and the hokey rendition of "Lucille". I am thinking that the 35c is pretty evenly matched with the 2.5 liter fuel injected engine that I have, or the wimpy 258 cid carbureted engine in Mike's CJ7 ;^), but it is not for V8 use or towing. According to Jerry's excellent post, to which you failed to render sufficient homage, the 44a isn't either. Earle "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message news:de194$446aac84$48311525$29794@FUSE.NET... > Jerry, Your reply was the only one that actually relayed useful and direct > information about the durability of the 44a. > > The only reply I received that was directed toward a direct comparison of > the 35c and 44a was that the rear end of your WJ can be jacked if you have > the 35c and not if you have the 44a. > > I asked because I wanted to know what the real world experiences have been > and it seems that the failure rate of the 44a in normal street usage, in > respect to the active posters on this newsgroup, is 100%. > > If this the case then why is it used over the 35c which is, at least, > suitable for street and mild off-road use? > > I assume it is not cheaper to manufacture because then it would be used in > all WJs. > > > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > news:Mzxag.532$sP1.151@fed1read07... > > You got several replies from an owner of the specific axle you asked > > about, me, and I gave you my actual real experiences with it. I also let > > you know that I had bad experiences with it in two different Grand > > Cherokees that used the exact same axle you asked about. You apparently > > didn't like my real world experience with it so I guess you only wanted > > positive experiences. I now feel like the time I spent sharing what I > > thought was help real-world experiences with you was a 100% waste of my > > time. Most people are a bit more appreciative when they receive > > thoughtful answers. What a waste of my time. > > > > billy ray wrote: > >> I guess I should not be surprised........ When the topic is something > >> ridiculous there are no limits on the number of people who are willing to > >> pass on whatever information they may have but a serious topic.... > >> well... You have seen the replies... > >> > >> > >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > >> > >>>If you want to put something over on your son in law, just tell your > >>>daughter he's no good. No need to confuse the issue with facts. ;^) > >>> > >>>Earle > >>> > >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . > >>> > >>>>My son in law has an '03 with the factory towing package and, I am > >>> > >>>assuming, > >>> > >>>>a Dana 44a in the back. > >>>> > >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message > >>>>news:44696433.71B47DC7@cox.net... > >>>> > >>>>> And the fact that you own an '02 WJ with a 35. > >>>>> God Bless America, Bill O|||||||O > >>>>>mailto:-------------------- http://www.----------.com/ > >>>>> > >>>>>billy ray wrote: > >>>>> > >>>>>>Yes, > >>>>>> > >>>>>>As you may recall my original questions were: > >>>>>>"What is the real story with the Aluminum Dana 44 differential? > >>>>>>Just how strong (or weak) is it? > >>>>>>Does it have maintenance and reliability problems?" > >>>>>> > >>>>>>I am just trying to get an reply that answer them.... > >>>> > >>>> > >>> > >> > >> > > > > -- > > Jerry Bransford > > PP-ASEL N6TAY > > See the Geezer Jeep at > > http://members.cox.net/jerrypb/ > > *** Posted via a free Usenet account from http://www.teranews.com *** |
Re: Aluminum Dana 44
LOL! Got news for ya, they put a 'real' Dana 44 in my CJ7....
I also don't think they put the 35C into any CJ7. Mike Earle Horton wrote: > > Because, Billy Ray, perception is reality. The 44 or 44a has a bigger ring > gear, and a higher model number, so it must be the better axle. It just > must be. > > Back in the real world, posters here have reported that the 35c is not up to > the abuse that a 4.0 liter engine can dish out. One fellow that I am > thinking of reported, that he only subjected it to "street and mild off-road > use", but he is a member of the Mile High Jeepers Club, uh huh. Those guys > never abuse equipment. Then there is Bill's page, with all the axle shafts > pulled out and the hokey rendition of "Lucille". I am thinking that the 35c > is pretty evenly matched with the 2.5 liter fuel injected engine that I > have, or the wimpy 258 cid carbureted engine in Mike's CJ7 ;^), but it is > not for V8 use or towing. > > According to Jerry's excellent post, to which you failed to render > sufficient homage, the 44a isn't either. > > Earle > > "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > news:de194$446aac84$48311525$29794@FUSE.NET... > > Jerry, Your reply was the only one that actually relayed useful and > direct > > information about the durability of the 44a. > > > > The only reply I received that was directed toward a direct comparison of > > the 35c and 44a was that the rear end of your WJ can be jacked if you have > > the 35c and not if you have the 44a. > > > > I asked because I wanted to know what the real world experiences have > been > > and it seems that the failure rate of the 44a in normal street usage, in > > respect to the active posters on this newsgroup, is 100%. > > > > If this the case then why is it used over the 35c which is, at least, > > suitable for street and mild off-road use? > > > > I assume it is not cheaper to manufacture because then it would be used in > > all WJs. > > > > > > > > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > > news:Mzxag.532$sP1.151@fed1read07... > > > You got several replies from an owner of the specific axle you asked > > > about, me, and I gave you my actual real experiences with it. I also > let > > > you know that I had bad experiences with it in two different Grand > > > Cherokees that used the exact same axle you asked about. You apparently > > > didn't like my real world experience with it so I guess you only wanted > > > positive experiences. I now feel like the time I spent sharing what I > > > thought was help real-world experiences with you was a 100% waste of my > > > time. Most people are a bit more appreciative when they receive > > > thoughtful answers. What a waste of my time. > > > > > > billy ray wrote: > > >> I guess I should not be surprised........ When the topic is something > > >> ridiculous there are no limits on the number of people who are willing > to > > >> pass on whatever information they may have but a serious topic.... > > >> well... You have seen the replies... > > >> > > >> > > >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > > >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > > >> > > >>>If you want to put something over on your son in law, just tell your > > >>>daughter he's no good. No need to confuse the issue with facts. ;^) > > >>> > > >>>Earle > > >>> > > >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > > >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . > > >>> > > >>>>My son in law has an '03 with the factory towing package and, I am > > >>> > > >>>assuming, > > >>> > > >>>>a Dana 44a in the back. > > >>>> > > >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message > > >>>>news:44696433.71B47DC7@cox.net... > > >>>> > > >>>>> And the fact that you own an '02 WJ with a 35. > > >>>>> God Bless America, Bill O|||||||O > > >>>>>mailto:-------------------- http://www.----------.com/ > > >>>>> > > >>>>>billy ray wrote: > > >>>>> > > >>>>>>Yes, > > >>>>>> > > >>>>>>As you may recall my original questions were: > > >>>>>>"What is the real story with the Aluminum Dana 44 differential? > > >>>>>>Just how strong (or weak) is it? > > >>>>>>Does it have maintenance and reliability problems?" > > >>>>>> > > >>>>>>I am just trying to get an reply that answer them.... > > >>>> > > >>>> > > >>> > > >> > > >> > > > > > > -- > > > Jerry Bransford > > > PP-ASEL N6TAY > > > See the Geezer Jeep at > > > http://members.cox.net/jerrypb/ > > > > > > *** Posted via a free Usenet account from http://www.teranews.com *** |
Re: Aluminum Dana 44
LOL! Got news for ya, they put a 'real' Dana 44 in my CJ7....
I also don't think they put the 35C into any CJ7. Mike Earle Horton wrote: > > Because, Billy Ray, perception is reality. The 44 or 44a has a bigger ring > gear, and a higher model number, so it must be the better axle. It just > must be. > > Back in the real world, posters here have reported that the 35c is not up to > the abuse that a 4.0 liter engine can dish out. One fellow that I am > thinking of reported, that he only subjected it to "street and mild off-road > use", but he is a member of the Mile High Jeepers Club, uh huh. Those guys > never abuse equipment. Then there is Bill's page, with all the axle shafts > pulled out and the hokey rendition of "Lucille". I am thinking that the 35c > is pretty evenly matched with the 2.5 liter fuel injected engine that I > have, or the wimpy 258 cid carbureted engine in Mike's CJ7 ;^), but it is > not for V8 use or towing. > > According to Jerry's excellent post, to which you failed to render > sufficient homage, the 44a isn't either. > > Earle > > "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > news:de194$446aac84$48311525$29794@FUSE.NET... > > Jerry, Your reply was the only one that actually relayed useful and > direct > > information about the durability of the 44a. > > > > The only reply I received that was directed toward a direct comparison of > > the 35c and 44a was that the rear end of your WJ can be jacked if you have > > the 35c and not if you have the 44a. > > > > I asked because I wanted to know what the real world experiences have > been > > and it seems that the failure rate of the 44a in normal street usage, in > > respect to the active posters on this newsgroup, is 100%. > > > > If this the case then why is it used over the 35c which is, at least, > > suitable for street and mild off-road use? > > > > I assume it is not cheaper to manufacture because then it would be used in > > all WJs. > > > > > > > > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > > news:Mzxag.532$sP1.151@fed1read07... > > > You got several replies from an owner of the specific axle you asked > > > about, me, and I gave you my actual real experiences with it. I also > let > > > you know that I had bad experiences with it in two different Grand > > > Cherokees that used the exact same axle you asked about. You apparently > > > didn't like my real world experience with it so I guess you only wanted > > > positive experiences. I now feel like the time I spent sharing what I > > > thought was help real-world experiences with you was a 100% waste of my > > > time. Most people are a bit more appreciative when they receive > > > thoughtful answers. What a waste of my time. > > > > > > billy ray wrote: > > >> I guess I should not be surprised........ When the topic is something > > >> ridiculous there are no limits on the number of people who are willing > to > > >> pass on whatever information they may have but a serious topic.... > > >> well... You have seen the replies... > > >> > > >> > > >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > > >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > > >> > > >>>If you want to put something over on your son in law, just tell your > > >>>daughter he's no good. No need to confuse the issue with facts. ;^) > > >>> > > >>>Earle > > >>> > > >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > > >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . > > >>> > > >>>>My son in law has an '03 with the factory towing package and, I am > > >>> > > >>>assuming, > > >>> > > >>>>a Dana 44a in the back. > > >>>> > > >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message > > >>>>news:44696433.71B47DC7@cox.net... > > >>>> > > >>>>> And the fact that you own an '02 WJ with a 35. > > >>>>> God Bless America, Bill O|||||||O > > >>>>>mailto:-------------------- http://www.----------.com/ > > >>>>> > > >>>>>billy ray wrote: > > >>>>> > > >>>>>>Yes, > > >>>>>> > > >>>>>>As you may recall my original questions were: > > >>>>>>"What is the real story with the Aluminum Dana 44 differential? > > >>>>>>Just how strong (or weak) is it? > > >>>>>>Does it have maintenance and reliability problems?" > > >>>>>> > > >>>>>>I am just trying to get an reply that answer them.... > > >>>> > > >>>> > > >>> > > >> > > >> > > > > > > -- > > > Jerry Bransford > > > PP-ASEL N6TAY > > > See the Geezer Jeep at > > > http://members.cox.net/jerrypb/ > > > > > > *** Posted via a free Usenet account from http://www.teranews.com *** |
Re: Aluminum Dana 44
LOL! Got news for ya, they put a 'real' Dana 44 in my CJ7....
I also don't think they put the 35C into any CJ7. Mike Earle Horton wrote: > > Because, Billy Ray, perception is reality. The 44 or 44a has a bigger ring > gear, and a higher model number, so it must be the better axle. It just > must be. > > Back in the real world, posters here have reported that the 35c is not up to > the abuse that a 4.0 liter engine can dish out. One fellow that I am > thinking of reported, that he only subjected it to "street and mild off-road > use", but he is a member of the Mile High Jeepers Club, uh huh. Those guys > never abuse equipment. Then there is Bill's page, with all the axle shafts > pulled out and the hokey rendition of "Lucille". I am thinking that the 35c > is pretty evenly matched with the 2.5 liter fuel injected engine that I > have, or the wimpy 258 cid carbureted engine in Mike's CJ7 ;^), but it is > not for V8 use or towing. > > According to Jerry's excellent post, to which you failed to render > sufficient homage, the 44a isn't either. > > Earle > > "billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > news:de194$446aac84$48311525$29794@FUSE.NET... > > Jerry, Your reply was the only one that actually relayed useful and > direct > > information about the durability of the 44a. > > > > The only reply I received that was directed toward a direct comparison of > > the 35c and 44a was that the rear end of your WJ can be jacked if you have > > the 35c and not if you have the 44a. > > > > I asked because I wanted to know what the real world experiences have > been > > and it seems that the failure rate of the 44a in normal street usage, in > > respect to the active posters on this newsgroup, is 100%. > > > > If this the case then why is it used over the 35c which is, at least, > > suitable for street and mild off-road use? > > > > I assume it is not cheaper to manufacture because then it would be used in > > all WJs. > > > > > > > > > > "Jerry Bransford" <jerrypb@cox.net> wrote in message > > news:Mzxag.532$sP1.151@fed1read07... > > > You got several replies from an owner of the specific axle you asked > > > about, me, and I gave you my actual real experiences with it. I also > let > > > you know that I had bad experiences with it in two different Grand > > > Cherokees that used the exact same axle you asked about. You apparently > > > didn't like my real world experience with it so I guess you only wanted > > > positive experiences. I now feel like the time I spent sharing what I > > > thought was help real-world experiences with you was a 100% waste of my > > > time. Most people are a bit more appreciative when they receive > > > thoughtful answers. What a waste of my time. > > > > > > billy ray wrote: > > >> I guess I should not be surprised........ When the topic is something > > >> ridiculous there are no limits on the number of people who are willing > to > > >> pass on whatever information they may have but a serious topic.... > > >> well... You have seen the replies... > > >> > > >> > > >> "Earle Horton" <Nurse-NOSPAM-Busters@msn.com> wrote in message > > >> news:4469ebd0$0$6048$a82e2bb9@reader.athenanews.co m... > > >> > > >>>If you want to put something over on your son in law, just tell your > > >>>daughter he's no good. No need to confuse the issue with facts. ;^) > > >>> > > >>>Earle > > >>> > > >>>"billy ray" <Kill.them.all@God.knows.his.own.com> wrote in message > > >>>news:75ec0$4469cc1a$48311525$13706@FUSE.NET.. . > > >>> > > >>>>My son in law has an '03 with the factory towing package and, I am > > >>> > > >>>assuming, > > >>> > > >>>>a Dana 44a in the back. > > >>>> > > >>>>"L.W.(Bill) ------ III" <----------@cox.net> wrote in message > > >>>>news:44696433.71B47DC7@cox.net... > > >>>> > > >>>>> And the fact that you own an '02 WJ with a 35. > > >>>>> God Bless America, Bill O|||||||O > > >>>>>mailto:-------------------- http://www.----------.com/ > > >>>>> > > >>>>>billy ray wrote: > > >>>>> > > >>>>>>Yes, > > >>>>>> > > >>>>>>As you may recall my original questions were: > > >>>>>>"What is the real story with the Aluminum Dana 44 differential? > > >>>>>>Just how strong (or weak) is it? > > >>>>>>Does it have maintenance and reliability problems?" > > >>>>>> > > >>>>>>I am just trying to get an reply that answer them.... > > >>>> > > >>>> > > >>> > > >> > > >> > > > > > > -- > > > Jerry Bransford > > > PP-ASEL N6TAY > > > See the Geezer Jeep at > > > http://members.cox.net/jerrypb/ > > > > > > *** Posted via a free Usenet account from http://www.teranews.com *** |
Re: Aluminum Dana 44
You should understand that the OP isn't the only one benefiting from the
posting of your experience. tw __________________________________________________ ___________________ 2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco "There is a very fine line between 'hobby' and 'mental illness'." Pronunciation: 'jEp Function: noun Date: 1940 Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase') A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton capacity and four-wheel drive used by the U.S. army in World War II. __________________________________________________ ___________________ Jerry Bransford wrote: > You got several replies from an owner of the specific axle you asked > about, me, and I gave you my actual real experiences with it. I also > let you know that I had bad experiences with it in two different Grand > Cherokees that used the exact same axle you asked about. You apparently > didn't like my real world experience with it so I guess you only wanted > positive experiences. I now feel like the time I spent sharing what I > thought was help real-world experiences with you was a 100% waste of my > time. Most people are a bit more appreciative when they receive > thoughtful answers. What a waste of my time. |
Re: Aluminum Dana 44
You should understand that the OP isn't the only one benefiting from the
posting of your experience. tw __________________________________________________ ___________________ 2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco "There is a very fine line between 'hobby' and 'mental illness'." Pronunciation: 'jEp Function: noun Date: 1940 Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase') A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton capacity and four-wheel drive used by the U.S. army in World War II. __________________________________________________ ___________________ Jerry Bransford wrote: > You got several replies from an owner of the specific axle you asked > about, me, and I gave you my actual real experiences with it. I also > let you know that I had bad experiences with it in two different Grand > Cherokees that used the exact same axle you asked about. You apparently > didn't like my real world experience with it so I guess you only wanted > positive experiences. I now feel like the time I spent sharing what I > thought was help real-world experiences with you was a 100% waste of my > time. Most people are a bit more appreciative when they receive > thoughtful answers. What a waste of my time. |
Re: Aluminum Dana 44
You should understand that the OP isn't the only one benefiting from the
posting of your experience. tw __________________________________________________ ___________________ 2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco "There is a very fine line between 'hobby' and 'mental illness'." Pronunciation: 'jEp Function: noun Date: 1940 Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase') A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton capacity and four-wheel drive used by the U.S. army in World War II. __________________________________________________ ___________________ Jerry Bransford wrote: > You got several replies from an owner of the specific axle you asked > about, me, and I gave you my actual real experiences with it. I also > let you know that I had bad experiences with it in two different Grand > Cherokees that used the exact same axle you asked about. You apparently > didn't like my real world experience with it so I guess you only wanted > positive experiences. I now feel like the time I spent sharing what I > thought was help real-world experiences with you was a 100% waste of my > time. Most people are a bit more appreciative when they receive > thoughtful answers. What a waste of my time. |
Re: Aluminum Dana 44
Yes, I often reverse what I'm thinking. I lived in Germany for a
year and half. God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ mabar wrote: > > Bill: > > The Nazis called their country the father land. The Russians called their > country the mother land. > > Tom |
Re: Aluminum Dana 44
Yes, I often reverse what I'm thinking. I lived in Germany for a
year and half. God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ mabar wrote: > > Bill: > > The Nazis called their country the father land. The Russians called their > country the mother land. > > Tom |
Re: Aluminum Dana 44
Yes, I often reverse what I'm thinking. I lived in Germany for a
year and half. God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ mabar wrote: > > Bill: > > The Nazis called their country the father land. The Russians called their > country the mother land. > > Tom |
Re: Aluminum Dana 44
Very true.
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ twaldron wrote: > > You should understand that the OP isn't the only one benefiting from the > posting of your experience. > > tw > __________________________________________________ ___________________ > 2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco > > "There is a very fine line between 'hobby' and 'mental illness'." > > Pronunciation: 'jEp Function: noun Date: 1940 > > Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase') > A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton > capacity and four-wheel drive used by the U.S. army in World War II. |
| All times are GMT -4. The time now is 09:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands