Alternative defrost vent duct
10-14-2004, 02:11 PM
#1
Guest
Posts: n/a
Alternative defrost vent duct
I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
to put in an aftermarket guage. Due to the guage's depth into the dash, the
old duct is just too fat and bulky to work anymore. Anyone have any
alternatives that I might be able to use in the old duct's place?
Thanks in advance,
Bill
to put in an aftermarket guage. Due to the guage's depth into the dash, the
old duct is just too fat and bulky to work anymore. Anyone have any
alternatives that I might be able to use in the old duct's place?
Thanks in advance,
Bill
10-14-2004, 02:23 PM
#2
Guest
Posts: n/a
Re: Alternative defrost vent duct
I can't think of anything that isn't going to be a restriction. Up here
I want all the defrost power I can get.
I recommend a different gauge.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash, the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
> Thanks in advance,
>
> Bill
I want all the defrost power I can get.
I recommend a different gauge.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash, the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
> Thanks in advance,
>
> Bill
10-14-2004, 02:23 PM
#3
Guest
Posts: n/a
Re: Alternative defrost vent duct
I can't think of anything that isn't going to be a restriction. Up here
I want all the defrost power I can get.
I recommend a different gauge.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash, the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
> Thanks in advance,
>
> Bill
I want all the defrost power I can get.
I recommend a different gauge.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash, the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
> Thanks in advance,
>
> Bill
10-14-2004, 02:23 PM
#4
Guest
Posts: n/a
Re: Alternative defrost vent duct
I can't think of anything that isn't going to be a restriction. Up here
I want all the defrost power I can get.
I recommend a different gauge.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash, the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
> Thanks in advance,
>
> Bill
I want all the defrost power I can get.
I recommend a different gauge.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash, the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
> Thanks in advance,
>
> Bill
10-14-2004, 02:30 PM
#5
Guest
Posts: n/a
Re: Alternative defrost vent duct
Yesterday I bought a new plastic one to replace my torn almost paper like
vent. Would a more flexible plastic vent work for you? how tight is the
fit back there?
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2t7tv5F1rml0vU1@uni-berlin.de...
>I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash,
> the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
>
> Thanks in advance,
>
> Bill
>
>
vent. Would a more flexible plastic vent work for you? how tight is the
fit back there?
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2t7tv5F1rml0vU1@uni-berlin.de...
>I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash,
> the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
>
> Thanks in advance,
>
> Bill
>
>
10-14-2004, 02:30 PM
#6
Guest
Posts: n/a
Re: Alternative defrost vent duct
Yesterday I bought a new plastic one to replace my torn almost paper like
vent. Would a more flexible plastic vent work for you? how tight is the
fit back there?
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2t7tv5F1rml0vU1@uni-berlin.de...
>I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash,
> the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
>
> Thanks in advance,
>
> Bill
>
>
vent. Would a more flexible plastic vent work for you? how tight is the
fit back there?
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2t7tv5F1rml0vU1@uni-berlin.de...
>I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash,
> the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
>
> Thanks in advance,
>
> Bill
>
>
10-14-2004, 02:30 PM
#7
Guest
Posts: n/a
Re: Alternative defrost vent duct
Yesterday I bought a new plastic one to replace my torn almost paper like
vent. Would a more flexible plastic vent work for you? how tight is the
fit back there?
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2t7tv5F1rml0vU1@uni-berlin.de...
>I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash,
> the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
>
> Thanks in advance,
>
> Bill
>
>
vent. Would a more flexible plastic vent work for you? how tight is the
fit back there?
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2t7tv5F1rml0vU1@uni-berlin.de...
>I pulled my stock duct out which vents to my defrost on my 83 CJ7 in order
> to put in an aftermarket guage. Due to the guage's depth into the dash,
> the
> old duct is just too fat and bulky to work anymore. Anyone have any
> alternatives that I might be able to use in the old duct's place?
>
>
> Thanks in advance,
>
> Bill
>
>
10-14-2004, 02:38 PM
#8
Guest
Posts: n/a
Re: Alternative defrost vent duct
how thin is it?
Where did you buy it?
I was thinking I need something flexible, like the stock but better quality
and more flexible.
"Rusted" <noEmail@please.com> wrote in message
news:tBzbd.14147$D82.1954@fe27.usenetserver.com...
> Yesterday I bought a new plastic one to replace my torn almost paper like
> vent. Would a more flexible plastic vent work for you? how tight is the
> fit back there?
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2t7tv5F1rml0vU1@uni-berlin.de...
> >I pulled my stock duct out which vents to my defrost on my 83 CJ7 in
order
> > to put in an aftermarket guage. Due to the guage's depth into the dash,
> > the
> > old duct is just too fat and bulky to work anymore. Anyone have any
> > alternatives that I might be able to use in the old duct's place?
> >
> >
> > Thanks in advance,
> >
> > Bill
> >
> >
>
>
>
Where did you buy it?
I was thinking I need something flexible, like the stock but better quality
and more flexible.
"Rusted" <noEmail@please.com> wrote in message
news:tBzbd.14147$D82.1954@fe27.usenetserver.com...
> Yesterday I bought a new plastic one to replace my torn almost paper like
> vent. Would a more flexible plastic vent work for you? how tight is the
> fit back there?
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2t7tv5F1rml0vU1@uni-berlin.de...
> >I pulled my stock duct out which vents to my defrost on my 83 CJ7 in
order
> > to put in an aftermarket guage. Due to the guage's depth into the dash,
> > the
> > old duct is just too fat and bulky to work anymore. Anyone have any
> > alternatives that I might be able to use in the old duct's place?
> >
> >
> > Thanks in advance,
> >
> > Bill
> >
> >
>
>
>
10-14-2004, 02:38 PM
#9
Guest
Posts: n/a
Re: Alternative defrost vent duct
how thin is it?
Where did you buy it?
I was thinking I need something flexible, like the stock but better quality
and more flexible.
"Rusted" <noEmail@please.com> wrote in message
news:tBzbd.14147$D82.1954@fe27.usenetserver.com...
> Yesterday I bought a new plastic one to replace my torn almost paper like
> vent. Would a more flexible plastic vent work for you? how tight is the
> fit back there?
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2t7tv5F1rml0vU1@uni-berlin.de...
> >I pulled my stock duct out which vents to my defrost on my 83 CJ7 in
order
> > to put in an aftermarket guage. Due to the guage's depth into the dash,
> > the
> > old duct is just too fat and bulky to work anymore. Anyone have any
> > alternatives that I might be able to use in the old duct's place?
> >
> >
> > Thanks in advance,
> >
> > Bill
> >
> >
>
>
>
Where did you buy it?
I was thinking I need something flexible, like the stock but better quality
and more flexible.
"Rusted" <noEmail@please.com> wrote in message
news:tBzbd.14147$D82.1954@fe27.usenetserver.com...
> Yesterday I bought a new plastic one to replace my torn almost paper like
> vent. Would a more flexible plastic vent work for you? how tight is the
> fit back there?
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2t7tv5F1rml0vU1@uni-berlin.de...
> >I pulled my stock duct out which vents to my defrost on my 83 CJ7 in
order
> > to put in an aftermarket guage. Due to the guage's depth into the dash,
> > the
> > old duct is just too fat and bulky to work anymore. Anyone have any
> > alternatives that I might be able to use in the old duct's place?
> >
> >
> > Thanks in advance,
> >
> > Bill
> >
> >
>
>
>
10-14-2004, 02:38 PM
#10
Guest
Posts: n/a
Re: Alternative defrost vent duct
how thin is it?
Where did you buy it?
I was thinking I need something flexible, like the stock but better quality
and more flexible.
"Rusted" <noEmail@please.com> wrote in message
news:tBzbd.14147$D82.1954@fe27.usenetserver.com...
> Yesterday I bought a new plastic one to replace my torn almost paper like
> vent. Would a more flexible plastic vent work for you? how tight is the
> fit back there?
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2t7tv5F1rml0vU1@uni-berlin.de...
> >I pulled my stock duct out which vents to my defrost on my 83 CJ7 in
order
> > to put in an aftermarket guage. Due to the guage's depth into the dash,
> > the
> > old duct is just too fat and bulky to work anymore. Anyone have any
> > alternatives that I might be able to use in the old duct's place?
> >
> >
> > Thanks in advance,
> >
> > Bill
> >
> >
>
>
>
Where did you buy it?
I was thinking I need something flexible, like the stock but better quality
and more flexible.
"Rusted" <noEmail@please.com> wrote in message
news:tBzbd.14147$D82.1954@fe27.usenetserver.com...
> Yesterday I bought a new plastic one to replace my torn almost paper like
> vent. Would a more flexible plastic vent work for you? how tight is the
> fit back there?
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:2t7tv5F1rml0vU1@uni-berlin.de...
> >I pulled my stock duct out which vents to my defrost on my 83 CJ7 in
order
> > to put in an aftermarket guage. Due to the guage's depth into the dash,
> > the
> > old duct is just too fat and bulky to work anymore. Anyone have any
> > alternatives that I might be able to use in the old duct's place?
> >
> >
> > Thanks in advance,
> >
> > Bill
> >
> >
>
>
>
