Ah fook!
Guest
Posts: n/a
Ah ****!
Well, not so much as a few minutes after I tell someone here about how
a clicking/popping noise can be caused by the from the front U clamp that
holds the antisway bar in place breaking. Mine does. Again.
FARK!
Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
replaced. Aint' going to be able to weld with just mapp gas. :(
*sigh* at least this time I know where the problem is.
--
DougW
a clicking/popping noise can be caused by the from the front U clamp that
holds the antisway bar in place breaking. Mine does. Again.
FARK!
Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
replaced. Aint' going to be able to weld with just mapp gas. :(
*sigh* at least this time I know where the problem is.
--
DougW
Guest
Posts: n/a
Re: Ah ****!
On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
<post.replies@invalid.address> wrote:
> Well, not so much as a few minutes after I tell someone here about how
> a clicking/popping noise can be caused by the from the front U clamp that
> holds the antisway bar in place breaking. Mine does. Again.
>
> FARK!
>
> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
> replaced. Aint' going to be able to weld with just mapp gas. :(
>
> *sigh* at least this time I know where the problem is.
Why is it the !@#$% tank always has pressure until the day you need
it?
--
Will Honea <whonea@codenet.net>
<post.replies@invalid.address> wrote:
> Well, not so much as a few minutes after I tell someone here about how
> a clicking/popping noise can be caused by the from the front U clamp that
> holds the antisway bar in place breaking. Mine does. Again.
>
> FARK!
>
> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
> replaced. Aint' going to be able to weld with just mapp gas. :(
>
> *sigh* at least this time I know where the problem is.
Why is it the !@#$% tank always has pressure until the day you need
it?
--
Will Honea <whonea@codenet.net>
Guest
Posts: n/a
Re: Ah ****!
On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
<post.replies@invalid.address> wrote:
> Well, not so much as a few minutes after I tell someone here about how
> a clicking/popping noise can be caused by the from the front U clamp that
> holds the antisway bar in place breaking. Mine does. Again.
>
> FARK!
>
> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
> replaced. Aint' going to be able to weld with just mapp gas. :(
>
> *sigh* at least this time I know where the problem is.
Why is it the !@#$% tank always has pressure until the day you need
it?
--
Will Honea <whonea@codenet.net>
<post.replies@invalid.address> wrote:
> Well, not so much as a few minutes after I tell someone here about how
> a clicking/popping noise can be caused by the from the front U clamp that
> holds the antisway bar in place breaking. Mine does. Again.
>
> FARK!
>
> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
> replaced. Aint' going to be able to weld with just mapp gas. :(
>
> *sigh* at least this time I know where the problem is.
Why is it the !@#$% tank always has pressure until the day you need
it?
--
Will Honea <whonea@codenet.net>
Guest
Posts: n/a
Re: Ah ****!
On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
<post.replies@invalid.address> wrote:
> Well, not so much as a few minutes after I tell someone here about how
> a clicking/popping noise can be caused by the from the front U clamp that
> holds the antisway bar in place breaking. Mine does. Again.
>
> FARK!
>
> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
> replaced. Aint' going to be able to weld with just mapp gas. :(
>
> *sigh* at least this time I know where the problem is.
Why is it the !@#$% tank always has pressure until the day you need
it?
--
Will Honea <whonea@codenet.net>
<post.replies@invalid.address> wrote:
> Well, not so much as a few minutes after I tell someone here about how
> a clicking/popping noise can be caused by the from the front U clamp that
> holds the antisway bar in place breaking. Mine does. Again.
>
> FARK!
>
> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
> replaced. Aint' going to be able to weld with just mapp gas. :(
>
> *sigh* at least this time I know where the problem is.
Why is it the !@#$% tank always has pressure until the day you need
it?
--
Will Honea <whonea@codenet.net>
Guest
Posts: n/a
Re: Ah ****!
Will Honea did pass the time by typing:
> On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> <post.replies@invalid.address> wrote:
>
>> Well, not so much as a few minutes after I tell someone here about how
>> a clicking/popping noise can be caused by the from the front U clamp that
>> holds the antisway bar in place breaking. Mine does. Again.
>>
>> FARK!
>>
>> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
>> replaced. Aint' going to be able to weld with just mapp gas. :(
>>
>> *sigh* at least this time I know where the problem is.
>
> Why is it the !@#$% tank always has pressure until the day you need
> it?
Because I drained it last time and didn't go for a refill then. :]
Should get myself a real welding rig and stop playing with this stupid
Sears brand minibottle rig. The adjustment screws for gas and O2 are so
touchy it isn't even funny. It works well for fixing patio furnature and
thin metal but never lived up to what I thought it could do.
The writeup (still in progress)
http://members.***.net/wilsond/swaybar/
--
DougW
> On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> <post.replies@invalid.address> wrote:
>
>> Well, not so much as a few minutes after I tell someone here about how
>> a clicking/popping noise can be caused by the from the front U clamp that
>> holds the antisway bar in place breaking. Mine does. Again.
>>
>> FARK!
>>
>> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
>> replaced. Aint' going to be able to weld with just mapp gas. :(
>>
>> *sigh* at least this time I know where the problem is.
>
> Why is it the !@#$% tank always has pressure until the day you need
> it?
Because I drained it last time and didn't go for a refill then. :]
Should get myself a real welding rig and stop playing with this stupid
Sears brand minibottle rig. The adjustment screws for gas and O2 are so
touchy it isn't even funny. It works well for fixing patio furnature and
thin metal but never lived up to what I thought it could do.
The writeup (still in progress)
http://members.***.net/wilsond/swaybar/
--
DougW
Guest
Posts: n/a
Re: Ah ****!
Will Honea did pass the time by typing:
> On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> <post.replies@invalid.address> wrote:
>
>> Well, not so much as a few minutes after I tell someone here about how
>> a clicking/popping noise can be caused by the from the front U clamp that
>> holds the antisway bar in place breaking. Mine does. Again.
>>
>> FARK!
>>
>> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
>> replaced. Aint' going to be able to weld with just mapp gas. :(
>>
>> *sigh* at least this time I know where the problem is.
>
> Why is it the !@#$% tank always has pressure until the day you need
> it?
Because I drained it last time and didn't go for a refill then. :]
Should get myself a real welding rig and stop playing with this stupid
Sears brand minibottle rig. The adjustment screws for gas and O2 are so
touchy it isn't even funny. It works well for fixing patio furnature and
thin metal but never lived up to what I thought it could do.
The writeup (still in progress)
http://members.***.net/wilsond/swaybar/
--
DougW
> On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> <post.replies@invalid.address> wrote:
>
>> Well, not so much as a few minutes after I tell someone here about how
>> a clicking/popping noise can be caused by the from the front U clamp that
>> holds the antisway bar in place breaking. Mine does. Again.
>>
>> FARK!
>>
>> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
>> replaced. Aint' going to be able to weld with just mapp gas. :(
>>
>> *sigh* at least this time I know where the problem is.
>
> Why is it the !@#$% tank always has pressure until the day you need
> it?
Because I drained it last time and didn't go for a refill then. :]
Should get myself a real welding rig and stop playing with this stupid
Sears brand minibottle rig. The adjustment screws for gas and O2 are so
touchy it isn't even funny. It works well for fixing patio furnature and
thin metal but never lived up to what I thought it could do.
The writeup (still in progress)
http://members.***.net/wilsond/swaybar/
--
DougW
Guest
Posts: n/a
Re: Ah ****!
Will Honea did pass the time by typing:
> On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> <post.replies@invalid.address> wrote:
>
>> Well, not so much as a few minutes after I tell someone here about how
>> a clicking/popping noise can be caused by the from the front U clamp that
>> holds the antisway bar in place breaking. Mine does. Again.
>>
>> FARK!
>>
>> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
>> replaced. Aint' going to be able to weld with just mapp gas. :(
>>
>> *sigh* at least this time I know where the problem is.
>
> Why is it the !@#$% tank always has pressure until the day you need
> it?
Because I drained it last time and didn't go for a refill then. :]
Should get myself a real welding rig and stop playing with this stupid
Sears brand minibottle rig. The adjustment screws for gas and O2 are so
touchy it isn't even funny. It works well for fixing patio furnature and
thin metal but never lived up to what I thought it could do.
The writeup (still in progress)
http://members.***.net/wilsond/swaybar/
--
DougW
> On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> <post.replies@invalid.address> wrote:
>
>> Well, not so much as a few minutes after I tell someone here about how
>> a clicking/popping noise can be caused by the from the front U clamp that
>> holds the antisway bar in place breaking. Mine does. Again.
>>
>> FARK!
>>
>> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the O2 tank
>> replaced. Aint' going to be able to weld with just mapp gas. :(
>>
>> *sigh* at least this time I know where the problem is.
>
> Why is it the !@#$% tank always has pressure until the day you need
> it?
Because I drained it last time and didn't go for a refill then. :]
Should get myself a real welding rig and stop playing with this stupid
Sears brand minibottle rig. The adjustment screws for gas and O2 are so
touchy it isn't even funny. It works well for fixing patio furnature and
thin metal but never lived up to what I thought it could do.
The writeup (still in progress)
http://members.***.net/wilsond/swaybar/
--
DougW
Guest
Posts: n/a
Re: Ah ****!
I like my MIG, perfect for weekend warior stuff.
KH
"DougW" <post.replies@invalid.address> wrote in message
news:Ecbsb.8535$CK6.7646@okepread01...
> Will Honea did pass the time by typing:
> > On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> > <post.replies@invalid.address> wrote:
> >
> >> Well, not so much as a few minutes after I tell someone here about how
> >> a clicking/popping noise can be caused by the from the front U clamp
that
> >> holds the antisway bar in place breaking. Mine does. Again.
> >>
> >> FARK!
> >>
> >> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the
O2 tank
> >> replaced. Aint' going to be able to weld with just mapp gas. :(
> >>
> >> *sigh* at least this time I know where the problem is.
> >
> > Why is it the !@#$% tank always has pressure until the day you need
> > it?
>
> Because I drained it last time and didn't go for a refill then. :]
>
> Should get myself a real welding rig and stop playing with this stupid
> Sears brand minibottle rig. The adjustment screws for gas and O2 are so
> touchy it isn't even funny. It works well for fixing patio furnature and
> thin metal but never lived up to what I thought it could do.
>
> The writeup (still in progress)
> http://members.***.net/wilsond/swaybar/
>
> --
> DougW
>
>
KH
"DougW" <post.replies@invalid.address> wrote in message
news:Ecbsb.8535$CK6.7646@okepread01...
> Will Honea did pass the time by typing:
> > On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> > <post.replies@invalid.address> wrote:
> >
> >> Well, not so much as a few minutes after I tell someone here about how
> >> a clicking/popping noise can be caused by the from the front U clamp
that
> >> holds the antisway bar in place breaking. Mine does. Again.
> >>
> >> FARK!
> >>
> >> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the
O2 tank
> >> replaced. Aint' going to be able to weld with just mapp gas. :(
> >>
> >> *sigh* at least this time I know where the problem is.
> >
> > Why is it the !@#$% tank always has pressure until the day you need
> > it?
>
> Because I drained it last time and didn't go for a refill then. :]
>
> Should get myself a real welding rig and stop playing with this stupid
> Sears brand minibottle rig. The adjustment screws for gas and O2 are so
> touchy it isn't even funny. It works well for fixing patio furnature and
> thin metal but never lived up to what I thought it could do.
>
> The writeup (still in progress)
> http://members.***.net/wilsond/swaybar/
>
> --
> DougW
>
>
Guest
Posts: n/a
Re: Ah ****!
I like my MIG, perfect for weekend warior stuff.
KH
"DougW" <post.replies@invalid.address> wrote in message
news:Ecbsb.8535$CK6.7646@okepread01...
> Will Honea did pass the time by typing:
> > On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> > <post.replies@invalid.address> wrote:
> >
> >> Well, not so much as a few minutes after I tell someone here about how
> >> a clicking/popping noise can be caused by the from the front U clamp
that
> >> holds the antisway bar in place breaking. Mine does. Again.
> >>
> >> FARK!
> >>
> >> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the
O2 tank
> >> replaced. Aint' going to be able to weld with just mapp gas. :(
> >>
> >> *sigh* at least this time I know where the problem is.
> >
> > Why is it the !@#$% tank always has pressure until the day you need
> > it?
>
> Because I drained it last time and didn't go for a refill then. :]
>
> Should get myself a real welding rig and stop playing with this stupid
> Sears brand minibottle rig. The adjustment screws for gas and O2 are so
> touchy it isn't even funny. It works well for fixing patio furnature and
> thin metal but never lived up to what I thought it could do.
>
> The writeup (still in progress)
> http://members.***.net/wilsond/swaybar/
>
> --
> DougW
>
>
KH
"DougW" <post.replies@invalid.address> wrote in message
news:Ecbsb.8535$CK6.7646@okepread01...
> Will Honea did pass the time by typing:
> > On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> > <post.replies@invalid.address> wrote:
> >
> >> Well, not so much as a few minutes after I tell someone here about how
> >> a clicking/popping noise can be caused by the from the front U clamp
that
> >> holds the antisway bar in place breaking. Mine does. Again.
> >>
> >> FARK!
> >>
> >> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the
O2 tank
> >> replaced. Aint' going to be able to weld with just mapp gas. :(
> >>
> >> *sigh* at least this time I know where the problem is.
> >
> > Why is it the !@#$% tank always has pressure until the day you need
> > it?
>
> Because I drained it last time and didn't go for a refill then. :]
>
> Should get myself a real welding rig and stop playing with this stupid
> Sears brand minibottle rig. The adjustment screws for gas and O2 are so
> touchy it isn't even funny. It works well for fixing patio furnature and
> thin metal but never lived up to what I thought it could do.
>
> The writeup (still in progress)
> http://members.***.net/wilsond/swaybar/
>
> --
> DougW
>
>
Guest
Posts: n/a
Re: Ah ****!
I like my MIG, perfect for weekend warior stuff.
KH
"DougW" <post.replies@invalid.address> wrote in message
news:Ecbsb.8535$CK6.7646@okepread01...
> Will Honea did pass the time by typing:
> > On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> > <post.replies@invalid.address> wrote:
> >
> >> Well, not so much as a few minutes after I tell someone here about how
> >> a clicking/popping noise can be caused by the from the front U clamp
that
> >> holds the antisway bar in place breaking. Mine does. Again.
> >>
> >> FARK!
> >>
> >> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the
O2 tank
> >> replaced. Aint' going to be able to weld with just mapp gas. :(
> >>
> >> *sigh* at least this time I know where the problem is.
> >
> > Why is it the !@#$% tank always has pressure until the day you need
> > it?
>
> Because I drained it last time and didn't go for a refill then. :]
>
> Should get myself a real welding rig and stop playing with this stupid
> Sears brand minibottle rig. The adjustment screws for gas and O2 are so
> touchy it isn't even funny. It works well for fixing patio furnature and
> thin metal but never lived up to what I thought it could do.
>
> The writeup (still in progress)
> http://members.***.net/wilsond/swaybar/
>
> --
> DougW
>
>
KH
"DougW" <post.replies@invalid.address> wrote in message
news:Ecbsb.8535$CK6.7646@okepread01...
> Will Honea did pass the time by typing:
> > On Tue, 11 Nov 2003 06:25:11 UTC "DougW"
> > <post.replies@invalid.address> wrote:
> >
> >> Well, not so much as a few minutes after I tell someone here about how
> >> a clicking/popping noise can be caused by the from the front U clamp
that
> >> holds the antisway bar in place breaking. Mine does. Again.
> >>
> >> FARK!
> >>
> >> Oh well. I'll do a writeup on it sometime tomorrow. Need to get the
O2 tank
> >> replaced. Aint' going to be able to weld with just mapp gas. :(
> >>
> >> *sigh* at least this time I know where the problem is.
> >
> > Why is it the !@#$% tank always has pressure until the day you need
> > it?
>
> Because I drained it last time and didn't go for a refill then. :]
>
> Should get myself a real welding rig and stop playing with this stupid
> Sears brand minibottle rig. The adjustment screws for gas and O2 are so
> touchy it isn't even funny. It works well for fixing patio furnature and
> thin metal but never lived up to what I thought it could do.
>
> The writeup (still in progress)
> http://members.***.net/wilsond/swaybar/
>
> --
> DougW
>
>
