Aftermarket Fog Lamps - '93 JGC
#21
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
http://www.kchilites.com/store/faq.aspx
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> Boy, I searched all over that site and couldn't find any faq or
> support pages.
>
> ----
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> Boy, I searched all over that site and couldn't find any faq or
> support pages.
>
> ----
#22
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
http://www.kchilites.com/store/faq.aspx
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> Boy, I searched all over that site and couldn't find any faq or
> support pages.
>
> ----
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> Boy, I searched all over that site and couldn't find any faq or
> support pages.
>
> ----
#23
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
That works, but my lamps are Hella, not KC's.
----
On Sun, 21 May 2006 19:06:54 -0700, "L.W.(Bill) ------ III"
<----------@***.net> wrote:
>http://www.kchilites.com/store/faq.aspx
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>---- wrote:
>>
>> Boy, I searched all over that site and couldn't find any faq or
>> support pages.
>>
>> ----
----
On Sun, 21 May 2006 19:06:54 -0700, "L.W.(Bill) ------ III"
<----------@***.net> wrote:
>http://www.kchilites.com/store/faq.aspx
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>---- wrote:
>>
>> Boy, I searched all over that site and couldn't find any faq or
>> support pages.
>>
>> ----
#24
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
That works, but my lamps are Hella, not KC's.
----
On Sun, 21 May 2006 19:06:54 -0700, "L.W.(Bill) ------ III"
<----------@***.net> wrote:
>http://www.kchilites.com/store/faq.aspx
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>---- wrote:
>>
>> Boy, I searched all over that site and couldn't find any faq or
>> support pages.
>>
>> ----
----
On Sun, 21 May 2006 19:06:54 -0700, "L.W.(Bill) ------ III"
<----------@***.net> wrote:
>http://www.kchilites.com/store/faq.aspx
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>---- wrote:
>>
>> Boy, I searched all over that site and couldn't find any faq or
>> support pages.
>>
>> ----
#25
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
That works, but my lamps are Hella, not KC's.
----
On Sun, 21 May 2006 19:06:54 -0700, "L.W.(Bill) ------ III"
<----------@***.net> wrote:
>http://www.kchilites.com/store/faq.aspx
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>---- wrote:
>>
>> Boy, I searched all over that site and couldn't find any faq or
>> support pages.
>>
>> ----
----
On Sun, 21 May 2006 19:06:54 -0700, "L.W.(Bill) ------ III"
<----------@***.net> wrote:
>http://www.kchilites.com/store/faq.aspx
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>---- wrote:
>>
>> Boy, I searched all over that site and couldn't find any faq or
>> support pages.
>>
>> ----
#26
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
From the KC site I would have figured out to use a couple shock
absorber grommets, and been on my way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> That works, but my lamps are Hella, not KC's.
>
> ----
absorber grommets, and been on my way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> That works, but my lamps are Hella, not KC's.
>
> ----
#27
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
From the KC site I would have figured out to use a couple shock
absorber grommets, and been on my way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> That works, but my lamps are Hella, not KC's.
>
> ----
absorber grommets, and been on my way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> That works, but my lamps are Hella, not KC's.
>
> ----
#28
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
From the KC site I would have figured out to use a couple shock
absorber grommets, and been on my way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> That works, but my lamps are Hella, not KC's.
>
> ----
absorber grommets, and been on my way.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
---- wrote:
>
> That works, but my lamps are Hella, not KC's.
>
> ----
#29
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
The Hella lights I have ground through the bracket.
Mike
---- wrote:
>
> Good point. I should have known that. Maybe a nylon spacer? I like
> your idea of using a couple of nuts. I may just find a couple that
> add up to 7/16"
>
> ----
>
> On Sun, 21 May 2006 15:29:55 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >You want steel spacers/washers/nut to fill the hole. Aluminum will
> >electrically react with the steel bracket and rot out really fast. One
> >nut on either side might make up the space.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >Canadian Off Road Trips Photos: Non members can still view!
> >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >(More Off Road album links at bottom of the view page)
> >
> >---- wrote:
> >>
> >> I bought some Hella lamps to replace the factory fog lamps on my '93
> >> JGC. The factory lamps attach to a bracket that extends above the
> >> bumper, and have two ears for a horizontal bolt through the lamp base.
> >>
> >> The Hella's have the horizontal hole in the mount, but they are meant
> >> to attach to a supplied bracket that has a bolt that is supposed to
> >> drop through the bumper. I thnk I can make them work with the factory
> >> brackets by finding a 7/16" spacer to take up the extra space. I know
> >> many of you must have replaced these factory lamps with aftermarkets.
> >> Do you have any clever ideas about mounting to the factory mount, or
> >> should I just go to the hardward store and try to find some aluminum
> >> spacers?
> >>
> >> ----
Mike
---- wrote:
>
> Good point. I should have known that. Maybe a nylon spacer? I like
> your idea of using a couple of nuts. I may just find a couple that
> add up to 7/16"
>
> ----
>
> On Sun, 21 May 2006 15:29:55 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >You want steel spacers/washers/nut to fill the hole. Aluminum will
> >electrically react with the steel bracket and rot out really fast. One
> >nut on either side might make up the space.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >Canadian Off Road Trips Photos: Non members can still view!
> >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >(More Off Road album links at bottom of the view page)
> >
> >---- wrote:
> >>
> >> I bought some Hella lamps to replace the factory fog lamps on my '93
> >> JGC. The factory lamps attach to a bracket that extends above the
> >> bumper, and have two ears for a horizontal bolt through the lamp base.
> >>
> >> The Hella's have the horizontal hole in the mount, but they are meant
> >> to attach to a supplied bracket that has a bolt that is supposed to
> >> drop through the bumper. I thnk I can make them work with the factory
> >> brackets by finding a 7/16" spacer to take up the extra space. I know
> >> many of you must have replaced these factory lamps with aftermarkets.
> >> Do you have any clever ideas about mounting to the factory mount, or
> >> should I just go to the hardward store and try to find some aluminum
> >> spacers?
> >>
> >> ----
#30
Guest
Posts: n/a
Re: Aftermarket Fog Lamps - '93 JGC
The Hella lights I have ground through the bracket.
Mike
---- wrote:
>
> Good point. I should have known that. Maybe a nylon spacer? I like
> your idea of using a couple of nuts. I may just find a couple that
> add up to 7/16"
>
> ----
>
> On Sun, 21 May 2006 15:29:55 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >You want steel spacers/washers/nut to fill the hole. Aluminum will
> >electrically react with the steel bracket and rot out really fast. One
> >nut on either side might make up the space.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >Canadian Off Road Trips Photos: Non members can still view!
> >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >(More Off Road album links at bottom of the view page)
> >
> >---- wrote:
> >>
> >> I bought some Hella lamps to replace the factory fog lamps on my '93
> >> JGC. The factory lamps attach to a bracket that extends above the
> >> bumper, and have two ears for a horizontal bolt through the lamp base.
> >>
> >> The Hella's have the horizontal hole in the mount, but they are meant
> >> to attach to a supplied bracket that has a bolt that is supposed to
> >> drop through the bumper. I thnk I can make them work with the factory
> >> brackets by finding a 7/16" spacer to take up the extra space. I know
> >> many of you must have replaced these factory lamps with aftermarkets.
> >> Do you have any clever ideas about mounting to the factory mount, or
> >> should I just go to the hardward store and try to find some aluminum
> >> spacers?
> >>
> >> ----
Mike
---- wrote:
>
> Good point. I should have known that. Maybe a nylon spacer? I like
> your idea of using a couple of nuts. I may just find a couple that
> add up to 7/16"
>
> ----
>
> On Sun, 21 May 2006 15:29:55 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >You want steel spacers/washers/nut to fill the hole. Aluminum will
> >electrically react with the steel bracket and rot out really fast. One
> >nut on either side might make up the space.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >Canadian Off Road Trips Photos: Non members can still view!
> >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> >(More Off Road album links at bottom of the view page)
> >
> >---- wrote:
> >>
> >> I bought some Hella lamps to replace the factory fog lamps on my '93
> >> JGC. The factory lamps attach to a bracket that extends above the
> >> bumper, and have two ears for a horizontal bolt through the lamp base.
> >>
> >> The Hella's have the horizontal hole in the mount, but they are meant
> >> to attach to a supplied bracket that has a bolt that is supposed to
> >> drop through the bumper. I thnk I can make them work with the factory
> >> brackets by finding a 7/16" spacer to take up the extra space. I know
> >> many of you must have replaced these factory lamps with aftermarkets.
> >> Do you have any clever ideas about mounting to the factory mount, or
> >> should I just go to the hardward store and try to find some aluminum
> >> spacers?
> >>
> >> ----