|
Re: ABS light ON???
When I still had ABS, my ABS check light illuminated due to road grime/tar
that had collected on the ABS sensor on the front driver's side brake assembly. Cleaning it off with a rag and WD-40 cured it. Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "CRWLR" <beerman@yahoo.com> wrote in message news:10k1ln0ciiheu57@corp.supernews.com... > It can be one of two things, and is probably one or more speed sensor on > the > wheels, but could be the valve body that routes the brake fluid to the > wheels. > > It depends on when the ABS light comes on. If you start the car and the > light comes on with the key, but goes out after a few seconds, then comes > again BEFORE you start moving, this normally means one of the selonoids in > the valve body is toast. On my BMW, the valve body is about $1000. If the > light comes on with the key then goes out, then comes on again AFTER you > are > moving, then you have lost a speed sensor in one of the wheels. > > Be wary of the speed sensors because they are susceptible to poor > electrical > connection, but are often replaced at a cost of about $100 each - again, > pricing from my BMW - when they often will work again if they are just > unplugged and plugged back in. Perhaps a shot of contact cleaner while > they > are unplugged ... > > > > > "skutr" <valktthis@hotmail.com> wrote in message > news:1740d.289632$UTP.139976@twister01.bloor.is.ne t.cable.rogers.com... >> The ABS light on my 97 Grand Cherokee comes on and stays on. If I turn >> the >> engine on and off a couple of times it goes turns off any ideas?? If it >> makes any difference this is the first time for this and today we're > getting >> heavy rains, tail end of Francis. Thanks guys this group has always been >> helpful. Terry >> >> > > |
Re: ABS light ON???
When I still had ABS, my ABS check light illuminated due to road grime/tar
that had collected on the ABS sensor on the front driver's side brake assembly. Cleaning it off with a rag and WD-40 cured it. Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "CRWLR" <beerman@yahoo.com> wrote in message news:10k1ln0ciiheu57@corp.supernews.com... > It can be one of two things, and is probably one or more speed sensor on > the > wheels, but could be the valve body that routes the brake fluid to the > wheels. > > It depends on when the ABS light comes on. If you start the car and the > light comes on with the key, but goes out after a few seconds, then comes > again BEFORE you start moving, this normally means one of the selonoids in > the valve body is toast. On my BMW, the valve body is about $1000. If the > light comes on with the key then goes out, then comes on again AFTER you > are > moving, then you have lost a speed sensor in one of the wheels. > > Be wary of the speed sensors because they are susceptible to poor > electrical > connection, but are often replaced at a cost of about $100 each - again, > pricing from my BMW - when they often will work again if they are just > unplugged and plugged back in. Perhaps a shot of contact cleaner while > they > are unplugged ... > > > > > "skutr" <valktthis@hotmail.com> wrote in message > news:1740d.289632$UTP.139976@twister01.bloor.is.ne t.cable.rogers.com... >> The ABS light on my 97 Grand Cherokee comes on and stays on. If I turn >> the >> engine on and off a couple of times it goes turns off any ideas?? If it >> makes any difference this is the first time for this and today we're > getting >> heavy rains, tail end of Francis. Thanks guys this group has always been >> helpful. Terry >> >> > > |
Re: ABS light ON???
When I still had ABS, my ABS check light illuminated due to road grime/tar
that had collected on the ABS sensor on the front driver's side brake assembly. Cleaning it off with a rag and WD-40 cured it. Jerry -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ "CRWLR" <beerman@yahoo.com> wrote in message news:10k1ln0ciiheu57@corp.supernews.com... > It can be one of two things, and is probably one or more speed sensor on > the > wheels, but could be the valve body that routes the brake fluid to the > wheels. > > It depends on when the ABS light comes on. If you start the car and the > light comes on with the key, but goes out after a few seconds, then comes > again BEFORE you start moving, this normally means one of the selonoids in > the valve body is toast. On my BMW, the valve body is about $1000. If the > light comes on with the key then goes out, then comes on again AFTER you > are > moving, then you have lost a speed sensor in one of the wheels. > > Be wary of the speed sensors because they are susceptible to poor > electrical > connection, but are often replaced at a cost of about $100 each - again, > pricing from my BMW - when they often will work again if they are just > unplugged and plugged back in. Perhaps a shot of contact cleaner while > they > are unplugged ... > > > > > "skutr" <valktthis@hotmail.com> wrote in message > news:1740d.289632$UTP.139976@twister01.bloor.is.ne t.cable.rogers.com... >> The ABS light on my 97 Grand Cherokee comes on and stays on. If I turn >> the >> engine on and off a couple of times it goes turns off any ideas?? If it >> makes any difference this is the first time for this and today we're > getting >> heavy rains, tail end of Francis. Thanks guys this group has always been >> helpful. Terry >> >> > > |
Re: ABS light ON???
Did you unplug the sensor(s) and take it to the bench to work on it?
If so, I suspect the particles that collected on it were not the problem. My BMW had those particles too, and I cleaned them in place and the problem remains. That is, the lead was long enough that I brought the WD40 over to the car in my attempt to clean the sensors, and could accomplish the task without disconnecting the sensors. I need to repeat the job, but this time I need to actually unplug the sensors at the connectors. My ABS light will go for days without coming on, other times it will come on within 20 of begining to roll. I once noticed the ABS light came on in Reverse ... "Jerry Bransford" <jerrypb@cox.net> wrote in message news:cW40d.78858$yh.50424@fed1read05... > When I still had ABS, my ABS check light illuminated due to road grime/tar > that had collected on the ABS sensor on the front driver's side brake > assembly. Cleaning it off with a rag and WD-40 cured it. > > Jerry > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > "CRWLR" <beerman@yahoo.com> wrote in message > news:10k1ln0ciiheu57@corp.supernews.com... > > It can be one of two things, and is probably one or more speed sensor on > > the > > wheels, but could be the valve body that routes the brake fluid to the > > wheels. > > > > It depends on when the ABS light comes on. If you start the car and the > > light comes on with the key, but goes out after a few seconds, then comes > > again BEFORE you start moving, this normally means one of the selonoids in > > the valve body is toast. On my BMW, the valve body is about $1000. If the > > light comes on with the key then goes out, then comes on again AFTER you > > are > > moving, then you have lost a speed sensor in one of the wheels. > > > > Be wary of the speed sensors because they are susceptible to poor > > electrical > > connection, but are often replaced at a cost of about $100 each - again, > > pricing from my BMW - when they often will work again if they are just > > unplugged and plugged back in. Perhaps a shot of contact cleaner while > > they > > are unplugged ... > > > > > > > > > > "skutr" <valktthis@hotmail.com> wrote in message > > news:1740d.289632$UTP.139976@twister01.bloor.is.ne t.cable.rogers.com... > >> The ABS light on my 97 Grand Cherokee comes on and stays on. If I turn > >> the > >> engine on and off a couple of times it goes turns off any ideas?? If it > >> makes any difference this is the first time for this and today we're > > getting > >> heavy rains, tail end of Francis. Thanks guys this group has always been > >> helpful. Terry > >> > >> > > > > > > |
Re: ABS light ON???
Did you unplug the sensor(s) and take it to the bench to work on it?
If so, I suspect the particles that collected on it were not the problem. My BMW had those particles too, and I cleaned them in place and the problem remains. That is, the lead was long enough that I brought the WD40 over to the car in my attempt to clean the sensors, and could accomplish the task without disconnecting the sensors. I need to repeat the job, but this time I need to actually unplug the sensors at the connectors. My ABS light will go for days without coming on, other times it will come on within 20 of begining to roll. I once noticed the ABS light came on in Reverse ... "Jerry Bransford" <jerrypb@cox.net> wrote in message news:cW40d.78858$yh.50424@fed1read05... > When I still had ABS, my ABS check light illuminated due to road grime/tar > that had collected on the ABS sensor on the front driver's side brake > assembly. Cleaning it off with a rag and WD-40 cured it. > > Jerry > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > "CRWLR" <beerman@yahoo.com> wrote in message > news:10k1ln0ciiheu57@corp.supernews.com... > > It can be one of two things, and is probably one or more speed sensor on > > the > > wheels, but could be the valve body that routes the brake fluid to the > > wheels. > > > > It depends on when the ABS light comes on. If you start the car and the > > light comes on with the key, but goes out after a few seconds, then comes > > again BEFORE you start moving, this normally means one of the selonoids in > > the valve body is toast. On my BMW, the valve body is about $1000. If the > > light comes on with the key then goes out, then comes on again AFTER you > > are > > moving, then you have lost a speed sensor in one of the wheels. > > > > Be wary of the speed sensors because they are susceptible to poor > > electrical > > connection, but are often replaced at a cost of about $100 each - again, > > pricing from my BMW - when they often will work again if they are just > > unplugged and plugged back in. Perhaps a shot of contact cleaner while > > they > > are unplugged ... > > > > > > > > > > "skutr" <valktthis@hotmail.com> wrote in message > > news:1740d.289632$UTP.139976@twister01.bloor.is.ne t.cable.rogers.com... > >> The ABS light on my 97 Grand Cherokee comes on and stays on. If I turn > >> the > >> engine on and off a couple of times it goes turns off any ideas?? If it > >> makes any difference this is the first time for this and today we're > > getting > >> heavy rains, tail end of Francis. Thanks guys this group has always been > >> helpful. Terry > >> > >> > > > > > > |
Re: ABS light ON???
Did you unplug the sensor(s) and take it to the bench to work on it?
If so, I suspect the particles that collected on it were not the problem. My BMW had those particles too, and I cleaned them in place and the problem remains. That is, the lead was long enough that I brought the WD40 over to the car in my attempt to clean the sensors, and could accomplish the task without disconnecting the sensors. I need to repeat the job, but this time I need to actually unplug the sensors at the connectors. My ABS light will go for days without coming on, other times it will come on within 20 of begining to roll. I once noticed the ABS light came on in Reverse ... "Jerry Bransford" <jerrypb@cox.net> wrote in message news:cW40d.78858$yh.50424@fed1read05... > When I still had ABS, my ABS check light illuminated due to road grime/tar > that had collected on the ABS sensor on the front driver's side brake > assembly. Cleaning it off with a rag and WD-40 cured it. > > Jerry > -- > Jerry Bransford > PP-ASEL N6TAY > See the Geezer Jeep at > http://members.cox.net/jerrypb/ > "CRWLR" <beerman@yahoo.com> wrote in message > news:10k1ln0ciiheu57@corp.supernews.com... > > It can be one of two things, and is probably one or more speed sensor on > > the > > wheels, but could be the valve body that routes the brake fluid to the > > wheels. > > > > It depends on when the ABS light comes on. If you start the car and the > > light comes on with the key, but goes out after a few seconds, then comes > > again BEFORE you start moving, this normally means one of the selonoids in > > the valve body is toast. On my BMW, the valve body is about $1000. If the > > light comes on with the key then goes out, then comes on again AFTER you > > are > > moving, then you have lost a speed sensor in one of the wheels. > > > > Be wary of the speed sensors because they are susceptible to poor > > electrical > > connection, but are often replaced at a cost of about $100 each - again, > > pricing from my BMW - when they often will work again if they are just > > unplugged and plugged back in. Perhaps a shot of contact cleaner while > > they > > are unplugged ... > > > > > > > > > > "skutr" <valktthis@hotmail.com> wrote in message > > news:1740d.289632$UTP.139976@twister01.bloor.is.ne t.cable.rogers.com... > >> The ABS light on my 97 Grand Cherokee comes on and stays on. If I turn > >> the > >> engine on and off a couple of times it goes turns off any ideas?? If it > >> makes any difference this is the first time for this and today we're > > getting > >> heavy rains, tail end of Francis. Thanks guys this group has always been > >> helpful. Terry > >> > >> > > > > > > |
Re: ABS light ON???
I have had the light go on in my other cars (non Jeep) and each time it was a
little plug that plugs into the brake pedal. It just shakes loose and doesn't make contact anymore. |
Re: ABS light ON???
I have had the light go on in my other cars (non Jeep) and each time it was a
little plug that plugs into the brake pedal. It just shakes loose and doesn't make contact anymore. |
Re: ABS light ON???
I have had the light go on in my other cars (non Jeep) and each time it was a
little plug that plugs into the brake pedal. It just shakes loose and doesn't make contact anymore. |
| All times are GMT -4. The time now is 03:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands