AA Fixed Yoke kit on NP231
06-23-2004, 02:40 PM
#1
Guest
Posts: n/a
AA Fixed Yoke kit on NP231
I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
'92 YJ.
In the new tailhousing, there is a threaded hole at the end of the part
that the shift rail slides in to. It appears that lubricant will get to
that spot. There wasn;t any sort of plug in the box that would fill the
hole, nor was there any mention of it in the instructions.
I have seen pictures of the kit on some web sites, but none of them show
a threaded hole there. Am I supposed to plug this? If so, where would I
get the proper plug?
-Dan
'92 YJ.
In the new tailhousing, there is a threaded hole at the end of the part
that the shift rail slides in to. It appears that lubricant will get to
that spot. There wasn;t any sort of plug in the box that would fill the
hole, nor was there any mention of it in the instructions.
I have seen pictures of the kit on some web sites, but none of them show
a threaded hole there. Am I supposed to plug this? If so, where would I
get the proper plug?
-Dan
06-23-2004, 04:45 PM
#2
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Hi Dan,
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
06-23-2004, 04:45 PM
#3
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Hi Dan,
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
06-23-2004, 04:45 PM
#4
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Hi Dan,
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
06-23-2004, 04:45 PM
#5
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Hi Dan,
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
I've never heard of that, they all cast shut as this:
http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
factory second. I'd give them a call:
http://www.advanceadapters.com/contact.html Or just eat it and find the
plug size and measure the depth to make sure it'll clear, then it's
shifted all they way rearward.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dan wrote:
>
> I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> '92 YJ.
>
> In the new tailhousing, there is a threaded hole at the end of the part
> that the shift rail slides in to. It appears that lubricant will get to
> that spot. There wasn;t any sort of plug in the box that would fill the
> hole, nor was there any mention of it in the instructions.
>
> I have seen pictures of the kit on some web sites, but none of them show
> a threaded hole there. Am I supposed to plug this? If so, where would I
> get the proper plug?
>
> -Dan
06-24-2004, 02:25 PM
#6
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Thanks for the info Bill. I called Advance Adapters, and they told me
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
06-24-2004, 02:25 PM
#7
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Thanks for the info Bill. I called Advance Adapters, and they told me
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
06-24-2004, 02:25 PM
#8
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Thanks for the info Bill. I called Advance Adapters, and they told me
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
06-24-2004, 02:25 PM
#9
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Thanks for the info Bill. I called Advance Adapters, and they told me
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
that the current version of the kit is supposed to have the threaded
hole there, and that there should have been a plug in the box for it.
-Dan
L.W.(ßill) ------ III wrote:
> Hi Dan,
> I've never heard of that, they all cast shut as this:
> http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> factory second. I'd give them a call:
> http://www.advanceadapters.com/contact.html Or just eat it and find the
> plug size and measure the depth to make sure it'll clear, then it's
> shifted all they way rearward.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dan wrote:
>
>>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
>>'92 YJ.
>>
>>In the new tailhousing, there is a threaded hole at the end of the part
>>that the shift rail slides in to. It appears that lubricant will get to
>>that spot. There wasn;t any sort of plug in the box that would fill the
>>hole, nor was there any mention of it in the instructions.
>>
>>I have seen pictures of the kit on some web sites, but none of them show
>>a threaded hole there. Am I supposed to plug this? If so, where would I
>>get the proper plug?
>>
>> -Dan
06-27-2004, 01:50 AM
#10
Guest
Posts: n/a
Re: AA Fixed Yoke kit on NP231
Yep. There was a plug on my JB Conversions fixed yoke kit as well. I think
your kit was missing the plug. There's a reason for it...but the reason
escapes me for the moment.
"Dan" <dan@guy.com> wrote in message
news:E0FCc.841246$Pk3.173599@pd7tw1no...
> Thanks for the info Bill. I called Advance Adapters, and they told me
> that the current version of the kit is supposed to have the threaded
> hole there, and that there should have been a plug in the box for it.
>
> -Dan
>
> L.W.(ßill) ------ III wrote:
> > Hi Dan,
> > I've never heard of that, they all cast shut as this:
> > http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> > factory second. I'd give them a call:
> > http://www.advanceadapters.com/contact.html Or just eat it and find the
> > plug size and measure the depth to make sure it'll clear, then it's
> > shifted all they way rearward.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Dan wrote:
> >
> >>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> >>'92 YJ.
> >>
> >>In the new tailhousing, there is a threaded hole at the end of the part
> >>that the shift rail slides in to. It appears that lubricant will get to
> >>that spot. There wasn;t any sort of plug in the box that would fill the
> >>hole, nor was there any mention of it in the instructions.
> >>
> >>I have seen pictures of the kit on some web sites, but none of them show
> >>a threaded hole there. Am I supposed to plug this? If so, where would I
> >>get the proper plug?
> >>
> >> -Dan
your kit was missing the plug. There's a reason for it...but the reason
escapes me for the moment.
"Dan" <dan@guy.com> wrote in message
news:E0FCc.841246$Pk3.173599@pd7tw1no...
> Thanks for the info Bill. I called Advance Adapters, and they told me
> that the current version of the kit is supposed to have the threaded
> hole there, and that there should have been a plug in the box for it.
>
> -Dan
>
> L.W.(ßill) ------ III wrote:
> > Hi Dan,
> > I've never heard of that, they all cast shut as this:
> > http://www.4x4wire.com/jeep/reviews/...tcaseafter.jpg Must be a
> > factory second. I'd give them a call:
> > http://www.advanceadapters.com/contact.html Or just eat it and find the
> > plug size and measure the depth to make sure it'll clear, then it's
> > shifted all they way rearward.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Dan wrote:
> >
> >>I have installed an Advance Adpaters fixed yoke kit on the NP231 in my
> >>'92 YJ.
> >>
> >>In the new tailhousing, there is a threaded hole at the end of the part
> >>that the shift rail slides in to. It appears that lubricant will get to
> >>that spot. There wasn;t any sort of plug in the box that would fill the
> >>hole, nor was there any mention of it in the instructions.
> >>
> >>I have seen pictures of the kit on some web sites, but none of them show
> >>a threaded hole there. Am I supposed to plug this? If so, where would I
> >>get the proper plug?
> >>
> >> -Dan
