98 ZJ Fault Code
Guest
Posts: n/a
98 ZJ Fault Code
The check engine light came on in the 98 ZJ so I went to Advance Auto
and got the code. It's "Transmission P1763" - Governor Pressure Sensor
Volts Too High. The Governor Pressure Sensor input is above an
acceptable voltage level.
http://www.wjjeeps.com/faultcodes.htm#1700
The codes on this page are for a WJ but I'm guessing they're the same
for the ZJ We cleared the code but the "Check Engine" light came on
again. What's the fix?
Thanks,
Steve
00 XJ
98 ZJ
95 YJ
and got the code. It's "Transmission P1763" - Governor Pressure Sensor
Volts Too High. The Governor Pressure Sensor input is above an
acceptable voltage level.
http://www.wjjeeps.com/faultcodes.htm#1700
The codes on this page are for a WJ but I'm guessing they're the same
for the ZJ We cleared the code but the "Check Engine" light came on
again. What's the fix?
Thanks,
Steve
00 XJ
98 ZJ
95 YJ
Guest
Posts: n/a
Re: 98 ZJ Fault Code
All I can do is confirm the codes for the ZJ are the same P1763.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Landis wrote:
>
> The check engine light came on in the 98 ZJ so I went to Advance Auto
> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
> Volts Too High. The Governor Pressure Sensor input is above an
> acceptable voltage level.
> http://www.wjjeeps.com/faultcodes.htm#1700
> The codes on this page are for a WJ but I'm guessing they're the same
> for the ZJ We cleared the code but the "Check Engine" light came on
> again. What's the fix?
>
> Thanks,
> Steve
> 00 XJ
> 98 ZJ
> 95 YJ
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Landis wrote:
>
> The check engine light came on in the 98 ZJ so I went to Advance Auto
> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
> Volts Too High. The Governor Pressure Sensor input is above an
> acceptable voltage level.
> http://www.wjjeeps.com/faultcodes.htm#1700
> The codes on this page are for a WJ but I'm guessing they're the same
> for the ZJ We cleared the code but the "Check Engine" light came on
> again. What's the fix?
>
> Thanks,
> Steve
> 00 XJ
> 98 ZJ
> 95 YJ
Guest
Posts: n/a
Re: 98 ZJ Fault Code
All I can do is confirm the codes for the ZJ are the same P1763.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Landis wrote:
>
> The check engine light came on in the 98 ZJ so I went to Advance Auto
> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
> Volts Too High. The Governor Pressure Sensor input is above an
> acceptable voltage level.
> http://www.wjjeeps.com/faultcodes.htm#1700
> The codes on this page are for a WJ but I'm guessing they're the same
> for the ZJ We cleared the code but the "Check Engine" light came on
> again. What's the fix?
>
> Thanks,
> Steve
> 00 XJ
> 98 ZJ
> 95 YJ
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Landis wrote:
>
> The check engine light came on in the 98 ZJ so I went to Advance Auto
> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
> Volts Too High. The Governor Pressure Sensor input is above an
> acceptable voltage level.
> http://www.wjjeeps.com/faultcodes.htm#1700
> The codes on this page are for a WJ but I'm guessing they're the same
> for the ZJ We cleared the code but the "Check Engine" light came on
> again. What's the fix?
>
> Thanks,
> Steve
> 00 XJ
> 98 ZJ
> 95 YJ
Guest
Posts: n/a
Re: 98 ZJ Fault Code
All I can do is confirm the codes for the ZJ are the same P1763.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Landis wrote:
>
> The check engine light came on in the 98 ZJ so I went to Advance Auto
> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
> Volts Too High. The Governor Pressure Sensor input is above an
> acceptable voltage level.
> http://www.wjjeeps.com/faultcodes.htm#1700
> The codes on this page are for a WJ but I'm guessing they're the same
> for the ZJ We cleared the code but the "Check Engine" light came on
> again. What's the fix?
>
> Thanks,
> Steve
> 00 XJ
> 98 ZJ
> 95 YJ
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve Landis wrote:
>
> The check engine light came on in the 98 ZJ so I went to Advance Auto
> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
> Volts Too High. The Governor Pressure Sensor input is above an
> acceptable voltage level.
> http://www.wjjeeps.com/faultcodes.htm#1700
> The codes on this page are for a WJ but I'm guessing they're the same
> for the ZJ We cleared the code but the "Check Engine" light came on
> again. What's the fix?
>
> Thanks,
> Steve
> 00 XJ
> 98 ZJ
> 95 YJ
Guest
Posts: n/a
Re: 98 ZJ Fault Code
BTW, build sheet says it's the 42 RE Trans. Local guy at AutoZone also
works at the Dodge dealer. Told me it requires a cleaning of the valve
body. Drop the Trans pan, 10 bolts to drop the valve body, thorough
cleaning, and do everything else you need to do while the pan's dropped.
I was thinking TCM (ouch?)until I talked to him. Those shocks might
have to wait.
Steve
L.W.(Bill) ------ III wrote:
> All I can do is confirm the codes for the ZJ are the same P1763.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Landis wrote:
>> The check engine light came on in the 98 ZJ so I went to Advance Auto
>> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
>> Volts Too High. The Governor Pressure Sensor input is above an
>> acceptable voltage level.
>> http://www.wjjeeps.com/faultcodes.htm#1700
>> The codes on this page are for a WJ but I'm guessing they're the same
>> for the ZJ We cleared the code but the "Check Engine" light came on
>> again. What's the fix?
>>
>> Thanks,
>> Steve
>> 00 XJ
>> 98 ZJ
>> 95 YJ
works at the Dodge dealer. Told me it requires a cleaning of the valve
body. Drop the Trans pan, 10 bolts to drop the valve body, thorough
cleaning, and do everything else you need to do while the pan's dropped.
I was thinking TCM (ouch?)until I talked to him. Those shocks might
have to wait.
Steve
L.W.(Bill) ------ III wrote:
> All I can do is confirm the codes for the ZJ are the same P1763.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Landis wrote:
>> The check engine light came on in the 98 ZJ so I went to Advance Auto
>> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
>> Volts Too High. The Governor Pressure Sensor input is above an
>> acceptable voltage level.
>> http://www.wjjeeps.com/faultcodes.htm#1700
>> The codes on this page are for a WJ but I'm guessing they're the same
>> for the ZJ We cleared the code but the "Check Engine" light came on
>> again. What's the fix?
>>
>> Thanks,
>> Steve
>> 00 XJ
>> 98 ZJ
>> 95 YJ
Guest
Posts: n/a
Re: 98 ZJ Fault Code
BTW, build sheet says it's the 42 RE Trans. Local guy at AutoZone also
works at the Dodge dealer. Told me it requires a cleaning of the valve
body. Drop the Trans pan, 10 bolts to drop the valve body, thorough
cleaning, and do everything else you need to do while the pan's dropped.
I was thinking TCM (ouch?)until I talked to him. Those shocks might
have to wait.
Steve
L.W.(Bill) ------ III wrote:
> All I can do is confirm the codes for the ZJ are the same P1763.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Landis wrote:
>> The check engine light came on in the 98 ZJ so I went to Advance Auto
>> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
>> Volts Too High. The Governor Pressure Sensor input is above an
>> acceptable voltage level.
>> http://www.wjjeeps.com/faultcodes.htm#1700
>> The codes on this page are for a WJ but I'm guessing they're the same
>> for the ZJ We cleared the code but the "Check Engine" light came on
>> again. What's the fix?
>>
>> Thanks,
>> Steve
>> 00 XJ
>> 98 ZJ
>> 95 YJ
works at the Dodge dealer. Told me it requires a cleaning of the valve
body. Drop the Trans pan, 10 bolts to drop the valve body, thorough
cleaning, and do everything else you need to do while the pan's dropped.
I was thinking TCM (ouch?)until I talked to him. Those shocks might
have to wait.
Steve
L.W.(Bill) ------ III wrote:
> All I can do is confirm the codes for the ZJ are the same P1763.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Landis wrote:
>> The check engine light came on in the 98 ZJ so I went to Advance Auto
>> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
>> Volts Too High. The Governor Pressure Sensor input is above an
>> acceptable voltage level.
>> http://www.wjjeeps.com/faultcodes.htm#1700
>> The codes on this page are for a WJ but I'm guessing they're the same
>> for the ZJ We cleared the code but the "Check Engine" light came on
>> again. What's the fix?
>>
>> Thanks,
>> Steve
>> 00 XJ
>> 98 ZJ
>> 95 YJ
Guest
Posts: n/a
Re: 98 ZJ Fault Code
BTW, build sheet says it's the 42 RE Trans. Local guy at AutoZone also
works at the Dodge dealer. Told me it requires a cleaning of the valve
body. Drop the Trans pan, 10 bolts to drop the valve body, thorough
cleaning, and do everything else you need to do while the pan's dropped.
I was thinking TCM (ouch?)until I talked to him. Those shocks might
have to wait.
Steve
L.W.(Bill) ------ III wrote:
> All I can do is confirm the codes for the ZJ are the same P1763.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Landis wrote:
>> The check engine light came on in the 98 ZJ so I went to Advance Auto
>> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
>> Volts Too High. The Governor Pressure Sensor input is above an
>> acceptable voltage level.
>> http://www.wjjeeps.com/faultcodes.htm#1700
>> The codes on this page are for a WJ but I'm guessing they're the same
>> for the ZJ We cleared the code but the "Check Engine" light came on
>> again. What's the fix?
>>
>> Thanks,
>> Steve
>> 00 XJ
>> 98 ZJ
>> 95 YJ
works at the Dodge dealer. Told me it requires a cleaning of the valve
body. Drop the Trans pan, 10 bolts to drop the valve body, thorough
cleaning, and do everything else you need to do while the pan's dropped.
I was thinking TCM (ouch?)until I talked to him. Those shocks might
have to wait.
Steve
L.W.(Bill) ------ III wrote:
> All I can do is confirm the codes for the ZJ are the same P1763.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Steve Landis wrote:
>> The check engine light came on in the 98 ZJ so I went to Advance Auto
>> and got the code. It's "Transmission P1763" - Governor Pressure Sensor
>> Volts Too High. The Governor Pressure Sensor input is above an
>> acceptable voltage level.
>> http://www.wjjeeps.com/faultcodes.htm#1700
>> The codes on this page are for a WJ but I'm guessing they're the same
>> for the ZJ We cleared the code but the "Check Engine" light came on
>> again. What's the fix?
>>
>> Thanks,
>> Steve
>> 00 XJ
>> 98 ZJ
>> 95 YJ
Thread
Thread Starter
Forum
Replies
Last Post
cor-32
Jeep Grand Cherokee Forum
3
Jun 25, 2011 10:46 PM
josh00@comcast.net
Jeep Mailing List
16
Apr 26, 2005 03:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
