98 Cherokee Temp Sending Unit Replacement?
02-21-2005, 07:51 PM
#1
Guest
Posts: n/a
98 Cherokee Temp Sending Unit Replacement?
My temp gauge has begun to intermittently go to zero. Is this a sign
that the sending unit is going out or more probably one of those bad
electrical connections these vehicles are know to have?
Where is the sending unit located?
Thank you,
Warren
that the sending unit is going out or more probably one of those bad
electrical connections these vehicles are know to have?
Where is the sending unit located?
Thank you,
Warren
02-21-2005, 07:58 PM
#2
Guest
Posts: n/a
Re: 98 Cherokee Temp Sending Unit Replacement?
Road Toad did pass the time by typing:
> My temp gauge has begun to intermittently go to zero. Is this a sign
> that the sending unit is going out or more probably one of those bad
> electrical connections these vehicles are know to have?
Zero usually indicates a loose wire or the second ice age.
> Where is the sending unit located?
Oddly, that depends on the engine. :)
However, probably on the water pump housing.
http://members.***.net/wilsond/Fixes...s.html#sensors
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> My temp gauge has begun to intermittently go to zero. Is this a sign
> that the sending unit is going out or more probably one of those bad
> electrical connections these vehicles are know to have?
Zero usually indicates a loose wire or the second ice age.
> Where is the sending unit located?
Oddly, that depends on the engine. :)
However, probably on the water pump housing.
http://members.***.net/wilsond/Fixes...s.html#sensors
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
02-21-2005, 07:58 PM
#3
Guest
Posts: n/a
Re: 98 Cherokee Temp Sending Unit Replacement?
Road Toad did pass the time by typing:
> My temp gauge has begun to intermittently go to zero. Is this a sign
> that the sending unit is going out or more probably one of those bad
> electrical connections these vehicles are know to have?
Zero usually indicates a loose wire or the second ice age.
> Where is the sending unit located?
Oddly, that depends on the engine. :)
However, probably on the water pump housing.
http://members.***.net/wilsond/Fixes...s.html#sensors
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> My temp gauge has begun to intermittently go to zero. Is this a sign
> that the sending unit is going out or more probably one of those bad
> electrical connections these vehicles are know to have?
Zero usually indicates a loose wire or the second ice age.
> Where is the sending unit located?
Oddly, that depends on the engine. :)
However, probably on the water pump housing.
http://members.***.net/wilsond/Fixes...s.html#sensors
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
02-21-2005, 07:58 PM
#4
Guest
Posts: n/a
Re: 98 Cherokee Temp Sending Unit Replacement?
Road Toad did pass the time by typing:
> My temp gauge has begun to intermittently go to zero. Is this a sign
> that the sending unit is going out or more probably one of those bad
> electrical connections these vehicles are know to have?
Zero usually indicates a loose wire or the second ice age.
> Where is the sending unit located?
Oddly, that depends on the engine. :)
However, probably on the water pump housing.
http://members.***.net/wilsond/Fixes...s.html#sensors
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> My temp gauge has begun to intermittently go to zero. Is this a sign
> that the sending unit is going out or more probably one of those bad
> electrical connections these vehicles are know to have?
Zero usually indicates a loose wire or the second ice age.
> Where is the sending unit located?
Oddly, that depends on the engine. :)
However, probably on the water pump housing.
http://members.***.net/wilsond/Fixes...s.html#sensors
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
02-21-2005, 08:30 PM
#5
Guest
Posts: n/a
Re: 98 Cherokee Temp Sending Unit Replacement?
Thermostat housing, and I doubt it's changed positions since that
engine's conception in 1929:
http://www.collectorcarads.com/addetail.asp?carID=3794
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Zero usually indicates a loose wire or the second ice age.
>
> Oddly, that depends on the engine. :)
>
> However, probably on the water pump housing.
> http://members.***.net/wilsond/Fixes...s.html#sensors
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
engine's conception in 1929:
http://www.collectorcarads.com/addetail.asp?carID=3794
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Zero usually indicates a loose wire or the second ice age.
>
> Oddly, that depends on the engine. :)
>
> However, probably on the water pump housing.
> http://members.***.net/wilsond/Fixes...s.html#sensors
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
02-21-2005, 08:30 PM
#6
Guest
Posts: n/a
Re: 98 Cherokee Temp Sending Unit Replacement?
Thermostat housing, and I doubt it's changed positions since that
engine's conception in 1929:
http://www.collectorcarads.com/addetail.asp?carID=3794
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Zero usually indicates a loose wire or the second ice age.
>
> Oddly, that depends on the engine. :)
>
> However, probably on the water pump housing.
> http://members.***.net/wilsond/Fixes...s.html#sensors
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
engine's conception in 1929:
http://www.collectorcarads.com/addetail.asp?carID=3794
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Zero usually indicates a loose wire or the second ice age.
>
> Oddly, that depends on the engine. :)
>
> However, probably on the water pump housing.
> http://members.***.net/wilsond/Fixes...s.html#sensors
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
02-21-2005, 08:30 PM
#7
Guest
Posts: n/a
Re: 98 Cherokee Temp Sending Unit Replacement?
Thermostat housing, and I doubt it's changed positions since that
engine's conception in 1929:
http://www.collectorcarads.com/addetail.asp?carID=3794
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Zero usually indicates a loose wire or the second ice age.
>
> Oddly, that depends on the engine. :)
>
> However, probably on the water pump housing.
> http://members.***.net/wilsond/Fixes...s.html#sensors
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
engine's conception in 1929:
http://www.collectorcarads.com/addetail.asp?carID=3794
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Zero usually indicates a loose wire or the second ice age.
>
> Oddly, that depends on the engine. :)
>
> However, probably on the water pump housing.
> http://members.***.net/wilsond/Fixes...s.html#sensors
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
Thread
Thread Starter
Forum
Replies
Last Post
David C. Moller
Jeep Mailing List
0
09-21-2003 02:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)