97XJ Dana 30 Ball Joint remove/replace
06-20-2007, 02:48 PM
#1
Guest
Posts: n/a
97XJ Dana 30 Ball Joint remove/replace
OK...Replacing the passenger side knuckle & balljoints. I know I need
a ball joint service kit to make life easy, and not damage anything
else. With Harbor Freight being the closest place that has these
kits, thought I'd poll the folks here and see which kit (38335-0VGA
or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
ball joint & tie rod separator work as well?
Thanks,
E
a ball joint service kit to make life easy, and not damage anything
else. With Harbor Freight being the closest place that has these
kits, thought I'd poll the folks here and see which kit (38335-0VGA
or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
ball joint & tie rod separator work as well?
Thanks,
E
06-20-2007, 04:23 PM
#2
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
Harbor Freight is the last place I would go for tools.
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
06-20-2007, 04:23 PM
#3
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
Harbor Freight is the last place I would go for tools.
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
06-20-2007, 04:23 PM
#4
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
Harbor Freight is the last place I would go for tools.
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
06-20-2007, 04:23 PM
#5
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
Harbor Freight is the last place I would go for tools.
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
I use a "C" clamp and a fork:
http://members.citynet.net/trailjeep/balljoint.html
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
<eric@rr.com> wrote in message
news:acti73t2ji61bhl8d3hdqbkt8f2gn5l94a@4ax.com...
> OK...Replacing the passenger side knuckle & balljoints. I know I need
> a ball joint service kit to make life easy, and not damage anything
> else. With Harbor Freight being the closest place that has these
> kits, thought I'd poll the folks here and see which kit (38335-0VGA
> or 4065-0VGA) would best suit my needs. Also, will the 38649-0VGA
> ball joint & tie rod separator work as well?
>
> Thanks,
> E
--
Posted via a free Usenet account from http://www.teranews.com
06-20-2007, 05:32 PM
#6
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
On Wed, 20 Jun 2007 13:23:47 -0700, L.W. (L.W.) ------ III wrote:
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
06-20-2007, 05:32 PM
#7
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
On Wed, 20 Jun 2007 13:23:47 -0700, L.W. (L.W.) ------ III wrote:
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
06-20-2007, 05:32 PM
#8
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
On Wed, 20 Jun 2007 13:23:47 -0700, L.W. (L.W.) ------ III wrote:
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
06-20-2007, 05:32 PM
#9
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
On Wed, 20 Jun 2007 13:23:47 -0700, L.W. (L.W.) ------ III wrote:
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
> I use a "C" clamp and a fork
I'm not surprised at all, but I really don't wanna know the details of how
exactly you use it. Well, whatever turns you on, I suppose.
Just don't use your utensils of mass-disgustion on any of those poor
monkeys you suddenly have the hots for.
06-20-2007, 05:38 PM
#10
Guest
Posts: n/a
Re: 97XJ Dana 30 Ball Joint remove/replace
This from the biggest loser of them all! The jealous, really jealous, I
can't believe how jealous this little draft dodging coward schizophrenic
psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make
a fool of it's self. With an obsession with perverts and goats, where it
writes via remailers, and cross posts to other perverts to no one's
surprise. With extreme jealous ranting over my documents, possessions,
successes, manliness and super Southern California surfing body, beard, and
loving family. Committing forgery over many of them proving I'm a
responsible American man. You remind me of a little rat dog, like a Mexican
Chiwawa with it's senseless barking, me too, me too. You're even more senile
than I first thought. And the poor thing, you're too girlie to take
responsibility for yourself again, by signing your statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using schizophrenic psychopath
forged up names???????
You're not worth any more time when a cut and paste this same paragraph
it fits so well!
But, now worth a forwarding to: internet.help@shaw.ca,
security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org,
abuse@***.net
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Sam Simian" <neo-anderthal@hollywood&vine37_jungle.net> wrote in message
news:k1hei.42756$1i1.4043@pd7urf3no...
>
> I'm not surprised at all, but I really don't wanna know the details of how
> exactly you use it. Well, whatever turns you on, I suppose.
>
> Just don't use your utensils of mass-disgustion on any of those poor
> monkeys you suddenly have the hots for.
--
Posted via a free Usenet account from http://www.teranews.com
can't believe how jealous this little draft dodging coward schizophrenic
psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net
24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make
a fool of it's self. With an obsession with perverts and goats, where it
writes via remailers, and cross posts to other perverts to no one's
surprise. With extreme jealous ranting over my documents, possessions,
successes, manliness and super Southern California surfing body, beard, and
loving family. Committing forgery over many of them proving I'm a
responsible American man. You remind me of a little rat dog, like a Mexican
Chiwawa with it's senseless barking, me too, me too. You're even more senile
than I first thought. And the poor thing, you're too girlie to take
responsibility for yourself again, by signing your statement like a man.
That really thinks the group's members are so stupid not to know it's
the same coward, posting over and over again using schizophrenic psychopath
forged up names???????
You're not worth any more time when a cut and paste this same paragraph
it fits so well!
But, now worth a forwarding to: internet.help@shaw.ca,
security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@aioe.org,
abuse@***.net
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Sam Simian" <neo-anderthal@hollywood&vine37_jungle.net> wrote in message
news:k1hei.42756$1i1.4043@pd7urf3no...
>
> I'm not surprised at all, but I really don't wanna know the details of how
> exactly you use it. Well, whatever turns you on, I suppose.
>
> Just don't use your utensils of mass-disgustion on any of those poor
> monkeys you suddenly have the hots for.
--
Posted via a free Usenet account from http://www.teranews.com
