97 wrangler steering box
12-29-2004, 10:36 PM
#11
Guest
Posts: n/a
Re: 97 wrangler steering box
thanks for the info !
cal
"wkearney99" <wkearney99@hotmail.com> wrote in message
news:qa-dnZXK1vjGok7cRVn-tw@speakeasy.net...
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>
> Do NOT use a pickle fork on the pitman arm. You must use a puller
> intended
> for the purpose. You'll damage the housing on the steering box if you use
> a
> pickle fork. That and you may well damage the other side of the box where
> the shaft connects. Use a puller designed for the purpose. Leave the
> forks
> for use on ball joints or tie rod ends.
>
cal
"wkearney99" <wkearney99@hotmail.com> wrote in message
news:qa-dnZXK1vjGok7cRVn-tw@speakeasy.net...
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>
> Do NOT use a pickle fork on the pitman arm. You must use a puller
> intended
> for the purpose. You'll damage the housing on the steering box if you use
> a
> pickle fork. That and you may well damage the other side of the box where
> the shaft connects. Use a puller designed for the purpose. Leave the
> forks
> for use on ball joints or tie rod ends.
>
12-29-2004, 10:36 PM
#12
Guest
Posts: n/a
Re: 97 wrangler steering box
thanks for the info !
cal
"wkearney99" <wkearney99@hotmail.com> wrote in message
news:qa-dnZXK1vjGok7cRVn-tw@speakeasy.net...
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>
> Do NOT use a pickle fork on the pitman arm. You must use a puller
> intended
> for the purpose. You'll damage the housing on the steering box if you use
> a
> pickle fork. That and you may well damage the other side of the box where
> the shaft connects. Use a puller designed for the purpose. Leave the
> forks
> for use on ball joints or tie rod ends.
>
cal
"wkearney99" <wkearney99@hotmail.com> wrote in message
news:qa-dnZXK1vjGok7cRVn-tw@speakeasy.net...
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>
> Do NOT use a pickle fork on the pitman arm. You must use a puller
> intended
> for the purpose. You'll damage the housing on the steering box if you use
> a
> pickle fork. That and you may well damage the other side of the box where
> the shaft connects. Use a puller designed for the purpose. Leave the
> forks
> for use on ball joints or tie rod ends.
>
12-29-2004, 10:36 PM
#13
Guest
Posts: n/a
Re: 97 wrangler steering box
thanks for the info !
cal
"wkearney99" <wkearney99@hotmail.com> wrote in message
news:qa-dnZXK1vjGok7cRVn-tw@speakeasy.net...
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>
> Do NOT use a pickle fork on the pitman arm. You must use a puller
> intended
> for the purpose. You'll damage the housing on the steering box if you use
> a
> pickle fork. That and you may well damage the other side of the box where
> the shaft connects. Use a puller designed for the purpose. Leave the
> forks
> for use on ball joints or tie rod ends.
>
cal
"wkearney99" <wkearney99@hotmail.com> wrote in message
news:qa-dnZXK1vjGok7cRVn-tw@speakeasy.net...
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>
> Do NOT use a pickle fork on the pitman arm. You must use a puller
> intended
> for the purpose. You'll damage the housing on the steering box if you use
> a
> pickle fork. That and you may well damage the other side of the box where
> the shaft connects. Use a puller designed for the purpose. Leave the
> forks
> for use on ball joints or tie rod ends.
>
12-31-2004, 01:18 PM
#14
Guest
Posts: n/a
Re: 97 wrangler steering box
Hi Cal,
I just borrowed a kit with a pitman arm puller and pickel forks over the
Christmas holiday from O'Reilly Auto Parts. I had to put some money down,
however, all was refunded after I was done. I think other auto parts stores
have tools to use also. I know AutoZone has some tools.
thanks,
paul
97 TJ, 4.0L
"Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>
> How hard is it to remove and reinstall, especially the pitman arm. Is a
> pickle fork needed?
>
> thanks
>
> cal
>
>
I just borrowed a kit with a pitman arm puller and pickel forks over the
Christmas holiday from O'Reilly Auto Parts. I had to put some money down,
however, all was refunded after I was done. I think other auto parts stores
have tools to use also. I know AutoZone has some tools.
thanks,
paul
97 TJ, 4.0L
"Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>
> How hard is it to remove and reinstall, especially the pitman arm. Is a
> pickle fork needed?
>
> thanks
>
> cal
>
>
12-31-2004, 01:18 PM
#15
Guest
Posts: n/a
Re: 97 wrangler steering box
Hi Cal,
I just borrowed a kit with a pitman arm puller and pickel forks over the
Christmas holiday from O'Reilly Auto Parts. I had to put some money down,
however, all was refunded after I was done. I think other auto parts stores
have tools to use also. I know AutoZone has some tools.
thanks,
paul
97 TJ, 4.0L
"Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>
> How hard is it to remove and reinstall, especially the pitman arm. Is a
> pickle fork needed?
>
> thanks
>
> cal
>
>
I just borrowed a kit with a pitman arm puller and pickel forks over the
Christmas holiday from O'Reilly Auto Parts. I had to put some money down,
however, all was refunded after I was done. I think other auto parts stores
have tools to use also. I know AutoZone has some tools.
thanks,
paul
97 TJ, 4.0L
"Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>
> How hard is it to remove and reinstall, especially the pitman arm. Is a
> pickle fork needed?
>
> thanks
>
> cal
>
>
12-31-2004, 01:18 PM
#16
Guest
Posts: n/a
Re: 97 wrangler steering box
Hi Cal,
I just borrowed a kit with a pitman arm puller and pickel forks over the
Christmas holiday from O'Reilly Auto Parts. I had to put some money down,
however, all was refunded after I was done. I think other auto parts stores
have tools to use also. I know AutoZone has some tools.
thanks,
paul
97 TJ, 4.0L
"Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>
> How hard is it to remove and reinstall, especially the pitman arm. Is a
> pickle fork needed?
>
> thanks
>
> cal
>
>
I just borrowed a kit with a pitman arm puller and pickel forks over the
Christmas holiday from O'Reilly Auto Parts. I had to put some money down,
however, all was refunded after I was done. I think other auto parts stores
have tools to use also. I know AutoZone has some tools.
thanks,
paul
97 TJ, 4.0L
"Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>
> How hard is it to remove and reinstall, especially the pitman arm. Is a
> pickle fork needed?
>
> thanks
>
> cal
>
>
01-01-2005, 06:38 PM
#17
Guest
Posts: n/a
Re: 97 wrangler steering box
Thanks paul. I didn't think about borrowing the needed tools for one of the
local parts stores.
cal
"pbarton" <pbarton@houston.rr.com> wrote in message
news:JJgBd.37564$yv2.26186@fe2.texas.rr.com...
> Hi Cal,
> I just borrowed a kit with a pitman arm puller and pickel forks over
> the Christmas holiday from O'Reilly Auto Parts. I had to put some money
> down, however, all was refunded after I was done. I think other auto
> parts stores have tools to use also. I know AutoZone has some tools.
> thanks,
> paul
>
> 97 TJ, 4.0L
>
>
> "Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
> news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
>> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>>
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>>
>> thanks
>>
>> cal
>>
>>
>
>
local parts stores.
cal
"pbarton" <pbarton@houston.rr.com> wrote in message
news:JJgBd.37564$yv2.26186@fe2.texas.rr.com...
> Hi Cal,
> I just borrowed a kit with a pitman arm puller and pickel forks over
> the Christmas holiday from O'Reilly Auto Parts. I had to put some money
> down, however, all was refunded after I was done. I think other auto
> parts stores have tools to use also. I know AutoZone has some tools.
> thanks,
> paul
>
> 97 TJ, 4.0L
>
>
> "Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
> news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
>> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>>
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>>
>> thanks
>>
>> cal
>>
>>
>
>
01-01-2005, 06:38 PM
#18
Guest
Posts: n/a
Re: 97 wrangler steering box
Thanks paul. I didn't think about borrowing the needed tools for one of the
local parts stores.
cal
"pbarton" <pbarton@houston.rr.com> wrote in message
news:JJgBd.37564$yv2.26186@fe2.texas.rr.com...
> Hi Cal,
> I just borrowed a kit with a pitman arm puller and pickel forks over
> the Christmas holiday from O'Reilly Auto Parts. I had to put some money
> down, however, all was refunded after I was done. I think other auto
> parts stores have tools to use also. I know AutoZone has some tools.
> thanks,
> paul
>
> 97 TJ, 4.0L
>
>
> "Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
> news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
>> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>>
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>>
>> thanks
>>
>> cal
>>
>>
>
>
local parts stores.
cal
"pbarton" <pbarton@houston.rr.com> wrote in message
news:JJgBd.37564$yv2.26186@fe2.texas.rr.com...
> Hi Cal,
> I just borrowed a kit with a pitman arm puller and pickel forks over
> the Christmas holiday from O'Reilly Auto Parts. I had to put some money
> down, however, all was refunded after I was done. I think other auto
> parts stores have tools to use also. I know AutoZone has some tools.
> thanks,
> paul
>
> 97 TJ, 4.0L
>
>
> "Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
> news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
>> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>>
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>>
>> thanks
>>
>> cal
>>
>>
>
>
01-01-2005, 06:38 PM
#19
Guest
Posts: n/a
Re: 97 wrangler steering box
Thanks paul. I didn't think about borrowing the needed tools for one of the
local parts stores.
cal
"pbarton" <pbarton@houston.rr.com> wrote in message
news:JJgBd.37564$yv2.26186@fe2.texas.rr.com...
> Hi Cal,
> I just borrowed a kit with a pitman arm puller and pickel forks over
> the Christmas holiday from O'Reilly Auto Parts. I had to put some money
> down, however, all was refunded after I was done. I think other auto
> parts stores have tools to use also. I know AutoZone has some tools.
> thanks,
> paul
>
> 97 TJ, 4.0L
>
>
> "Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
> news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
>> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>>
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>>
>> thanks
>>
>> cal
>>
>>
>
>
local parts stores.
cal
"pbarton" <pbarton@houston.rr.com> wrote in message
news:JJgBd.37564$yv2.26186@fe2.texas.rr.com...
> Hi Cal,
> I just borrowed a kit with a pitman arm puller and pickel forks over
> the Christmas holiday from O'Reilly Auto Parts. I had to put some money
> down, however, all was refunded after I was done. I think other auto
> parts stores have tools to use also. I know AutoZone has some tools.
> thanks,
> paul
>
> 97 TJ, 4.0L
>
>
> "Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
> news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
>> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>>
>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>> pickle fork needed?
>>
>> thanks
>>
>> cal
>>
>>
>
>
01-01-2005, 11:21 PM
#20
Guest
Posts: n/a
Re: 97 wrangler steering box
"Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
news:vvGBd.1861$lN5.299743@twister.southeast.rr.co m...
> Thanks paul. I didn't think about borrowing the needed tools for one of
> the
^
from
> local parts stores.
>
> cal
>
>
> "pbarton" <pbarton@houston.rr.com> wrote in message
> news:JJgBd.37564$yv2.26186@fe2.texas.rr.com...
>> Hi Cal,
>> I just borrowed a kit with a pitman arm puller and pickel forks over
>> the Christmas holiday from O'Reilly Auto Parts. I had to put some money
>> down, however, all was refunded after I was done. I think other auto
>> parts stores have tools to use also. I know AutoZone has some tools.
>> thanks,
>> paul
>>
>> 97 TJ, 4.0L
>>
>>
>> "Cal" <codom1*IHATESPAM*@triad.rr.com> wrote in message
>> news:DrhAd.4959$aM4.876740@twister.southeast.rr.co m...
>>> Where is a good place to buy a steering box (manual) for a 97 wrangler?
>>>
>>> How hard is it to remove and reinstall, especially the pitman arm. Is a
>>> pickle fork needed?
>>>
>>> thanks
>>>
>>> cal
>>>
>>>
>>
>>
>
>
