I don't know about TJs, but I just disconnect the door switch wires on my
YJ. Plug them back in when I put the doors back.

Earle

"Tomes" <askme@here.net> wrote in message
news:1VqRf.3824$sL2.2369@newsread2.news.atl.earthl ink.net...
> No need to be sorry to be jumping in, welcome to here Mike. This is an
> interesting thingy. From the picture and the words, I just cannot figure
> out what exactly it does. I also would want to know if the
> I-left-the-headlights-on tinkle bell problem is fixed by this, as it is
> unreferenced. Anyone familiar with this item?
> Tomes
>
> "mike smith" <mike_243us@yahoo.com> wrote in message
> news:1142281874.757519.83860@u72g2000cwu.googlegro ups.com...
> > sorry to jump in on this thread but I was just looking at this last
> > night.
> > it's like 24.95 plus shipping here is the link to the page.
> >
> > Mike S.
> >
http://www.quadratec.com/cgi-bin/sgi...06031315192536
> >
> >
> >
> >
> > Spdloader wrote:
> >> Quadratec sells something just like that. I can't find it in my
catalog,
> >> but
> >> I know I've seen it.
> >>
> >> Spdloader
> >>
> >>
> >>
> >>
> >> "Les" <wiedrick@twcny.rr.com> wrote in message
> >> news:qfeRf.17692$jf2.17191@twister.nyroc.rr.com...
> >> >I took my fuse out and made up two spade lugs that fit the fuse block.
> >> >One
> >> >lug has a wire which goes through an on/off switch mounted up under
the
> >> >glove box then through an in line fuse holder and back to the other
lug
> >> >and
> >> >the lugs then plug into the two leg slots for fuse number four in the
> >> >fuse
> >> >block. I can then turn the switch so the light works when I have my
> >> >doors
> >> >on and turn it to off when they aren't on the TJ. Works quite well
and
> >> >the
> >> >light is nice when the doors are on.
> >> > Les
> >> >
> >> > "Scott in Baltimore" <sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote in
> >> > message
> >> > news:ro6dnZQ7VrF3aInZnZ2dnUVZ_tKdnZ2d@comcast.com. ..
> >> >> Tomes wrote:
> >> >>> On my 2002 TJ it is fuse #4. It goes in and out a lot. Keep
> >> >>> something
> >> >>> in the glove box to help pull it out with, like long-nose pliers or
> >> >>> the
> >> >>> special pulling thingy they sell for pulling these little fuses.
> >> >>>
> >> >>> Do note that it also will deactivate your I-left-the-headlights-on
> >> >>> tinkle bell, so that is the big tradeoff - you need to remember all
> >> >>> on
> >> >>> your own to turn off your lights when you get to work.....
> >> >>> Tomes
> >> >>
> >> >> It's labeled, so it's easy to find. Mine has been out so long, I
lost
> >> >> it.
> >> >
> >> >
> >
>
>

 

I don't know about TJs, but I just disconnect the door switch wires on my
YJ. Plug them back in when I put the doors back.

Earle

"Tomes" <askme@here.net> wrote in message
news:1VqRf.3824$sL2.2369@newsread2.news.atl.earthl ink.net...
> No need to be sorry to be jumping in, welcome to here Mike. This is an
> interesting thingy. From the picture and the words, I just cannot figure
> out what exactly it does. I also would want to know if the
> I-left-the-headlights-on tinkle bell problem is fixed by this, as it is
> unreferenced. Anyone familiar with this item?
> Tomes
>
> "mike smith" <mike_243us@yahoo.com> wrote in message
> news:1142281874.757519.83860@u72g2000cwu.googlegro ups.com...
> > sorry to jump in on this thread but I was just looking at this last
> > night.
> > it's like 24.95 plus shipping here is the link to the page.
> >
> > Mike S.
> >
http://www.quadratec.com/cgi-bin/sgi...06031315192536
> >
> >
> >
> >
> > Spdloader wrote:
> >> Quadratec sells something just like that. I can't find it in my
catalog,
> >> but
> >> I know I've seen it.
> >>
> >> Spdloader
> >>
> >>
> >>
> >>
> >> "Les" <wiedrick@twcny.rr.com> wrote in message
> >> news:qfeRf.17692$jf2.17191@twister.nyroc.rr.com...
> >> >I took my fuse out and made up two spade lugs that fit the fuse block.
> >> >One
> >> >lug has a wire which goes through an on/off switch mounted up under
the
> >> >glove box then through an in line fuse holder and back to the other
lug
> >> >and
> >> >the lugs then plug into the two leg slots for fuse number four in the
> >> >fuse
> >> >block. I can then turn the switch so the light works when I have my
> >> >doors
> >> >on and turn it to off when they aren't on the TJ. Works quite well
and
> >> >the
> >> >light is nice when the doors are on.
> >> > Les
> >> >
> >> > "Scott in Baltimore" <sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote in
> >> > message
> >> > news:ro6dnZQ7VrF3aInZnZ2dnUVZ_tKdnZ2d@comcast.com. ..
> >> >> Tomes wrote:
> >> >>> On my 2002 TJ it is fuse #4. It goes in and out a lot. Keep
> >> >>> something
> >> >>> in the glove box to help pull it out with, like long-nose pliers or
> >> >>> the
> >> >>> special pulling thingy they sell for pulling these little fuses.
> >> >>>
> >> >>> Do note that it also will deactivate your I-left-the-headlights-on
> >> >>> tinkle bell, so that is the big tradeoff - you need to remember all
> >> >>> on
> >> >>> your own to turn off your lights when you get to work.....
> >> >>> Tomes
> >> >>
> >> >> It's labeled, so it's easy to find. Mine has been out so long, I
lost
> >> >> it.
> >> >
> >> >
> >
>
>

 

I don't know about TJs, but I just disconnect the door switch wires on my
YJ. Plug them back in when I put the doors back.

Earle

"Tomes" <askme@here.net> wrote in message
news:1VqRf.3824$sL2.2369@newsread2.news.atl.earthl ink.net...
> No need to be sorry to be jumping in, welcome to here Mike. This is an
> interesting thingy. From the picture and the words, I just cannot figure
> out what exactly it does. I also would want to know if the
> I-left-the-headlights-on tinkle bell problem is fixed by this, as it is
> unreferenced. Anyone familiar with this item?
> Tomes
>
> "mike smith" <mike_243us@yahoo.com> wrote in message
> news:1142281874.757519.83860@u72g2000cwu.googlegro ups.com...
> > sorry to jump in on this thread but I was just looking at this last
> > night.
> > it's like 24.95 plus shipping here is the link to the page.
> >
> > Mike S.
> >
http://www.quadratec.com/cgi-bin/sgi...06031315192536
> >
> >
> >
> >
> > Spdloader wrote:
> >> Quadratec sells something just like that. I can't find it in my
catalog,
> >> but
> >> I know I've seen it.
> >>
> >> Spdloader
> >>
> >>
> >>
> >>
> >> "Les" <wiedrick@twcny.rr.com> wrote in message
> >> news:qfeRf.17692$jf2.17191@twister.nyroc.rr.com...
> >> >I took my fuse out and made up two spade lugs that fit the fuse block.
> >> >One
> >> >lug has a wire which goes through an on/off switch mounted up under
the
> >> >glove box then through an in line fuse holder and back to the other
lug
> >> >and
> >> >the lugs then plug into the two leg slots for fuse number four in the
> >> >fuse
> >> >block. I can then turn the switch so the light works when I have my
> >> >doors
> >> >on and turn it to off when they aren't on the TJ. Works quite well
and
> >> >the
> >> >light is nice when the doors are on.
> >> > Les
> >> >
> >> > "Scott in Baltimore" <sDcOoNtTtS_PuAnMiMtE_69@yahoo.com> wrote in
> >> > message
> >> > news:ro6dnZQ7VrF3aInZnZ2dnUVZ_tKdnZ2d@comcast.com. ..
> >> >> Tomes wrote:
> >> >>> On my 2002 TJ it is fuse #4. It goes in and out a lot. Keep
> >> >>> something
> >> >>> in the glove box to help pull it out with, like long-nose pliers or
> >> >>> the
> >> >>> special pulling thingy they sell for pulling these little fuses.
> >> >>>
> >> >>> Do note that it also will deactivate your I-left-the-headlights-on
> >> >>> tinkle bell, so that is the big tradeoff - you need to remember all
> >> >>> on
> >> >>> your own to turn off your lights when you get to work.....
> >> >>> Tomes
> >> >>
> >> >> It's labeled, so it's easy to find. Mine has been out so long, I
lost
> >> >> it.
> >> >
> >> >
> >
>
>

 

You can remove Fuse 4 from the fuse block to disable the overhead light that
is hooked to the door switch. The light still works by the dimmer switch
though ...





<peterbythesea@gmail.com> wrote in message
news:1142206967.927252.149720@i39g2000cwa.googlegr oups.com...
>I removed the doors (full steel) from my 1997 TJ Sport the other day.
> I realized once the doors were off that the interior lights on my sound
> bar and hard top remained ON, because of the buttons in the door
> casings being left in the "open" position. I ended up removing the
> bulb from the sound bar light, and disconnecting the wiring harness to
> the hard top to avoid a dead battery... Is there a better way?
>

 

You can remove Fuse 4 from the fuse block to disable the overhead light that
is hooked to the door switch. The light still works by the dimmer switch
though ...





<peterbythesea@gmail.com> wrote in message
news:1142206967.927252.149720@i39g2000cwa.googlegr oups.com...
>I removed the doors (full steel) from my 1997 TJ Sport the other day.
> I realized once the doors were off that the interior lights on my sound
> bar and hard top remained ON, because of the buttons in the door
> casings being left in the "open" position. I ended up removing the
> bulb from the sound bar light, and disconnecting the wiring harness to
> the hard top to avoid a dead battery... Is there a better way?
>

 

You can remove Fuse 4 from the fuse block to disable the overhead light that
is hooked to the door switch. The light still works by the dimmer switch
though ...





<peterbythesea@gmail.com> wrote in message
news:1142206967.927252.149720@i39g2000cwa.googlegr oups.com...
>I removed the doors (full steel) from my 1997 TJ Sport the other day.
> I realized once the doors were off that the interior lights on my sound
> bar and hard top remained ON, because of the buttons in the door
> casings being left in the "open" position. I ended up removing the
> bulb from the sound bar light, and disconnecting the wiring harness to
> the hard top to avoid a dead battery... Is there a better way?
>

 

You can remove Fuse 4 from the fuse block to disable the overhead light that
is hooked to the door switch. The light still works by the dimmer switch
though ...





<peterbythesea@gmail.com> wrote in message
news:1142206967.927252.149720@i39g2000cwa.googlegr oups.com...
>I removed the doors (full steel) from my 1997 TJ Sport the other day.
> I realized once the doors were off that the interior lights on my sound
> bar and hard top remained ON, because of the buttons in the door
> casings being left in the "open" position. I ended up removing the
> bulb from the sound bar light, and disconnecting the wiring harness to
> the hard top to avoid a dead battery... Is there a better way?
>

 

now thats cool on my 97 tj it came home the bolts came off the doors
and the fuse came out for the lights.
my 06 will most likely get the switch otr I will build one can't be to
tough.
would be cool to wire it to one of the blanks under the radio ( would
it look stock?)


Mike S.

 

now thats cool on my 97 tj it came home the bolts came off the doors
and the fuse came out for the lights.
my 06 will most likely get the switch otr I will build one can't be to
tough.
would be cool to wire it to one of the blanks under the radio ( would
it look stock?)


Mike S.

 

now thats cool on my 97 tj it came home the bolts came off the doors
and the fuse came out for the lights.
my 06 will most likely get the switch otr I will build one can't be to
tough.
would be cool to wire it to one of the blanks under the radio ( would
it look stock?)


Mike S.