97 TJ Dana 35 Pinion Seal Question
05-31-2004, 12:57 AM
#2
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I've always tapped them in with a seal tool until they bottom out which, so
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
05-31-2004, 12:57 AM
#3
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I've always tapped them in with a seal tool until they bottom out which, so
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
05-31-2004, 12:57 AM
#4
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I've always tapped them in with a seal tool until they bottom out which, so
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
05-31-2004, 12:57 AM
#5
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I've always tapped them in with a seal tool until they bottom out which, so
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
far, has worked fine for me.
Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
N6TAY, PP-ASEL
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Tqm" <tqmfun@hotmail.com> wrote in message
news:UEyuc.16347$Tn6.8299@newsread1.news.pas.earth link.net...
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
>
>
05-31-2004, 02:36 AM
#6
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I think you'll find a ridge to drive the seal against, like this
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
05-31-2004, 02:36 AM
#7
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I think you'll find a ridge to drive the seal against, like this
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
05-31-2004, 02:36 AM
#8
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I think you'll find a ridge to drive the seal against, like this
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
05-31-2004, 02:36 AM
#9
Guest
Posts: n/a
Re: 97 TJ Dana 35 Pinion Seal Question
I think you'll find a ridge to drive the seal against, like this
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
picture of a reverse Dana 44:
http://www.off-road.com/ford/flashba..._0108.jpg.html If you
don't rent the tool, find a pipe that size so you may drive it straight
on like a wheel seal.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Tqm wrote:
>
> Evening,
> What is the depth of the pinion seal supposed to be on a rear Dana 35?
> Flush with the housing or until it bottoms out?
> Thanks
> Tqm
Thread
Thread Starter
Forum
Replies
Last Post
Paul Tremblay
Jeep Mailing List
0
07-28-2004 10:17 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)