97 TJ Big Trouble
#11
Guest
Posts: n/a
Re: 97 TJ Big Trouble
> I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
#12
Guest
Posts: n/a
Re: 97 TJ Big Trouble
> I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
#13
Guest
Posts: n/a
Re: 97 TJ Big Trouble
> I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
#14
Guest
Posts: n/a
Re: 97 TJ Big Trouble
In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
#15
Guest
Posts: n/a
Re: 97 TJ Big Trouble
In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
#16
Guest
Posts: n/a
Re: 97 TJ Big Trouble
In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
#17
Guest
Posts: n/a
Re: 97 TJ Big Trouble
In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
<gporter1970(goaway)@***.net>" wrote:
>How do I say this...
>
>You da man!!!
>
>I da dope. I had it going in the right firing order but wrong direction
>(CCW instead of CW).
>
>I guess I am semi-retarded since I had it kind of right.
Nah, full retard. ;-)
>
>Thanks again
>GP
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40C7B1B2.B297CC75@***.net...
>> The wires plugged into the disturber cap in relation to the cap
>> screws, as: http://www.----------.com/6fireOrder.jpg
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> GP-TJ wrote:
>> >
>> > I am getting ready for my emissions testing. I changed the oil/filter,
>> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
>used
>> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
>have
>> > the cap/rotor so I did the rest of the work and then picked up a
>cap/rotor
>> > after work yesterday. Today I put the new cap/rotor and the thing won't
>> > run. I put the old one and it won't run. I checked the plug wires and
>> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
>> > engine. I put the old wires and still no good. I tried to run it but
>it
>> > runs very badly. The catalytic converter got red hot. There is no
>check
>> > engine light and no codes. The only code is 12 because I disconnected
>the
>> > battery terminals to try to see if it needed a reset or something.
>> >
>> > Any ideas? My suspicion is that I have the wires on wrong but I checked
>> > them at least 100 times.
>> >
>> > I am a retard. I've done this job about 7 times to this Jeep and now I
>> > screw something up.
>> >
>> > Thanks
>
#18
Guest
Posts: n/a
Re: 97 TJ Big Trouble
bllsht did pass the time by typing:
> In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
> <gporter1970(goaway)@***.net>" wrote:
>
>> How do I say this...
>>
>> You da man!!!
>>
>> I da dope. I had it going in the right firing order but wrong direction
>> (CCW instead of CW).
>>
>> I guess I am semi-retarded since I had it kind of right.
>
> Nah, full retard. ;-)
I was thinking about 180 retard, but what do I know.
<:)
--
DougW
> In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
> <gporter1970(goaway)@***.net>" wrote:
>
>> How do I say this...
>>
>> You da man!!!
>>
>> I da dope. I had it going in the right firing order but wrong direction
>> (CCW instead of CW).
>>
>> I guess I am semi-retarded since I had it kind of right.
>
> Nah, full retard. ;-)
I was thinking about 180 retard, but what do I know.
<:)
--
DougW
#19
Guest
Posts: n/a
Re: 97 TJ Big Trouble
bllsht did pass the time by typing:
> In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
> <gporter1970(goaway)@***.net>" wrote:
>
>> How do I say this...
>>
>> You da man!!!
>>
>> I da dope. I had it going in the right firing order but wrong direction
>> (CCW instead of CW).
>>
>> I guess I am semi-retarded since I had it kind of right.
>
> Nah, full retard. ;-)
I was thinking about 180 retard, but what do I know.
<:)
--
DougW
> In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
> <gporter1970(goaway)@***.net>" wrote:
>
>> How do I say this...
>>
>> You da man!!!
>>
>> I da dope. I had it going in the right firing order but wrong direction
>> (CCW instead of CW).
>>
>> I guess I am semi-retarded since I had it kind of right.
>
> Nah, full retard. ;-)
I was thinking about 180 retard, but what do I know.
<:)
--
DougW
#20
Guest
Posts: n/a
Re: 97 TJ Big Trouble
bllsht did pass the time by typing:
> In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
> <gporter1970(goaway)@***.net>" wrote:
>
>> How do I say this...
>>
>> You da man!!!
>>
>> I da dope. I had it going in the right firing order but wrong direction
>> (CCW instead of CW).
>>
>> I guess I am semi-retarded since I had it kind of right.
>
> Nah, full retard. ;-)
I was thinking about 180 retard, but what do I know.
<:)
--
DougW
> In message <d%Oxc.6387$5B2.5435@lakeread04>, ""GP-TJ"
> <gporter1970(goaway)@***.net>" wrote:
>
>> How do I say this...
>>
>> You da man!!!
>>
>> I da dope. I had it going in the right firing order but wrong direction
>> (CCW instead of CW).
>>
>> I guess I am semi-retarded since I had it kind of right.
>
> Nah, full retard. ;-)
I was thinking about 180 retard, but what do I know.
<:)
--
DougW