97 TJ Big Trouble
06-09-2004, 08:39 PM
#1
Guest
Posts: n/a
97 TJ Big Trouble
I am getting ready for my emissions testing. I changed the oil/filter,
plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
the cap/rotor so I did the rest of the work and then picked up a cap/rotor
after work yesterday. Today I put the new cap/rotor and the thing won't
run. I put the old one and it won't run. I checked the plug wires and
everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
engine. I put the old wires and still no good. I tried to run it but it
runs very badly. The catalytic converter got red hot. There is no check
engine light and no codes. The only code is 12 because I disconnected the
battery terminals to try to see if it needed a reset or something.
Any ideas? My suspicion is that I have the wires on wrong but I checked
them at least 100 times.
I am a retard. I've done this job about 7 times to this Jeep and now I
screw something up.
Thanks
plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
the cap/rotor so I did the rest of the work and then picked up a cap/rotor
after work yesterday. Today I put the new cap/rotor and the thing won't
run. I put the old one and it won't run. I checked the plug wires and
everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
engine. I put the old wires and still no good. I tried to run it but it
runs very badly. The catalytic converter got red hot. There is no check
engine light and no codes. The only code is 12 because I disconnected the
battery terminals to try to see if it needed a reset or something.
Any ideas? My suspicion is that I have the wires on wrong but I checked
them at least 100 times.
I am a retard. I've done this job about 7 times to this Jeep and now I
screw something up.
Thanks
06-09-2004, 08:56 PM
#2
Guest
Posts: n/a
Re: 97 TJ Big Trouble
The wires plugged into the disturber cap in relation to the cap
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
06-09-2004, 08:56 PM
#3
Guest
Posts: n/a
Re: 97 TJ Big Trouble
The wires plugged into the disturber cap in relation to the cap
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
06-09-2004, 08:56 PM
#4
Guest
Posts: n/a
Re: 97 TJ Big Trouble
The wires plugged into the disturber cap in relation to the cap
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
06-09-2004, 08:56 PM
#5
Guest
Posts: n/a
Re: 97 TJ Big Trouble
The wires plugged into the disturber cap in relation to the cap
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
screws, as: http://www.----------.com/6fireOrder.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
GP-TJ wrote:
>
> I am getting ready for my emissions testing. I changed the oil/filter,
> plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I used
> was safe for O2 sensors. When I went to get the stuff Pep Boys didn't have
> the cap/rotor so I did the rest of the work and then picked up a cap/rotor
> after work yesterday. Today I put the new cap/rotor and the thing won't
> run. I put the old one and it won't run. I checked the plug wires and
> everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> engine. I put the old wires and still no good. I tried to run it but it
> runs very badly. The catalytic converter got red hot. There is no check
> engine light and no codes. The only code is 12 because I disconnected the
> battery terminals to try to see if it needed a reset or something.
>
> Any ideas? My suspicion is that I have the wires on wrong but I checked
> them at least 100 times.
>
> I am a retard. I've done this job about 7 times to this Jeep and now I
> screw something up.
>
> Thanks
06-09-2004, 09:44 PM
#6
Guest
Posts: n/a
Re: 97 TJ Big Trouble
How do I say this...
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
06-09-2004, 09:44 PM
#7
Guest
Posts: n/a
Re: 97 TJ Big Trouble
How do I say this...
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
06-09-2004, 09:44 PM
#8
Guest
Posts: n/a
Re: 97 TJ Big Trouble
How do I say this...
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
06-09-2004, 09:44 PM
#9
Guest
Posts: n/a
Re: 97 TJ Big Trouble
How do I say this...
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
You da man!!!
I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW).
I guess I am semi-retarded since I had it kind of right.
Thanks again
GP
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40C7B1B2.B297CC75@***.net...
> The wires plugged into the disturber cap in relation to the cap
> screws, as: http://www.----------.com/6fireOrder.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> GP-TJ wrote:
> >
> > I am getting ready for my emissions testing. I changed the oil/filter,
> > plugs, wires, cap/rotor, and cleaned the throttle body. The cleaner I
used
> > was safe for O2 sensors. When I went to get the stuff Pep Boys didn't
have
> > the cap/rotor so I did the rest of the work and then picked up a
cap/rotor
> > after work yesterday. Today I put the new cap/rotor and the thing won't
> > run. I put the old one and it won't run. I checked the plug wires and
> > everything is right 1 - 5 - 3 -6 - 2 - 4 just like it says on top of the
> > engine. I put the old wires and still no good. I tried to run it but
it
> > runs very badly. The catalytic converter got red hot. There is no
check
> > engine light and no codes. The only code is 12 because I disconnected
the
> > battery terminals to try to see if it needed a reset or something.
> >
> > Any ideas? My suspicion is that I have the wires on wrong but I checked
> > them at least 100 times.
> >
> > I am a retard. I've done this job about 7 times to this Jeep and now I
> > screw something up.
> >
> > Thanks
06-09-2004, 10:18 PM
#10
Guest
Posts: n/a
Re: 97 TJ Big Trouble
> I da dope. I had it going in the right firing order but wrong direction
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
(CCW instead of CW). I guess I am semi-retarded since I had it kind of
right.>
That dyslexia will get you every time...
(What does a dyslexic, agnostic, insomniac do? Stays up all night wondering
if there really may be a dog!)
