97 Jeep Cherokee freak error
Guest
Posts: n/a
Re: 97 Jeep Cherokee freak error
Thanks for the input. Once I fix it I'll let you know.
Jo
"Dave" <dmcglynn@gmail.com> wrote in message
news:1115731924.656117.324580@o13g2000cwo.googlegr oups.com...
>A google search for "PO123 TPS" revealed the following link:
>
> http://www.tec-help.com/97_Dodge_Dakota_TPS.htm
>
> Thought it might help..?
> -Dave
>
Jo
"Dave" <dmcglynn@gmail.com> wrote in message
news:1115731924.656117.324580@o13g2000cwo.googlegr oups.com...
>A google search for "PO123 TPS" revealed the following link:
>
> http://www.tec-help.com/97_Dodge_Dakota_TPS.htm
>
> Thought it might help..?
> -Dave
>
Guest
Posts: n/a
Re: 97 Jeep Cherokee freak error
Thanks for the input. Once I fix it I'll let you know.
Jo
"Dave" <dmcglynn@gmail.com> wrote in message
news:1115731924.656117.324580@o13g2000cwo.googlegr oups.com...
>A google search for "PO123 TPS" revealed the following link:
>
> http://www.tec-help.com/97_Dodge_Dakota_TPS.htm
>
> Thought it might help..?
> -Dave
>
Jo
"Dave" <dmcglynn@gmail.com> wrote in message
news:1115731924.656117.324580@o13g2000cwo.googlegr oups.com...
>A google search for "PO123 TPS" revealed the following link:
>
> http://www.tec-help.com/97_Dodge_Dakota_TPS.htm
>
> Thought it might help..?
> -Dave
>
Guest
Posts: n/a
Re: 97 Jeep Cherokee freak error
Thanks for the input. Once I fix it I'll let you know.
Jo
"Dave" <dmcglynn@gmail.com> wrote in message
news:1115731924.656117.324580@o13g2000cwo.googlegr oups.com...
>A google search for "PO123 TPS" revealed the following link:
>
> http://www.tec-help.com/97_Dodge_Dakota_TPS.htm
>
> Thought it might help..?
> -Dave
>
Jo
"Dave" <dmcglynn@gmail.com> wrote in message
news:1115731924.656117.324580@o13g2000cwo.googlegr oups.com...
>A google search for "PO123 TPS" revealed the following link:
>
> http://www.tec-help.com/97_Dodge_Dakota_TPS.htm
>
> Thought it might help..?
> -Dave
>
Guest
Posts: n/a
Re: 97 Jeep Cherokee freak error
that code means u have a open wire to the tps
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
Guest
Posts: n/a
Re: 97 Jeep Cherokee freak error
that code means u have a open wire to the tps
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
Guest
Posts: n/a
Re: 97 Jeep Cherokee freak error
that code means u have a open wire to the tps
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
Guest
Posts: n/a
Re: 97 Jeep Cherokee freak error
that code means u have a open wire to the tps
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
reigelser@sbcglobal.net wrote:
> Hi,
> I have a problem with a 97 inline 6cyl Jeep Cherokee sport: the check engine
> light came on and the code with it is PO123 "TPS input circuit A high ". So
> I replaced the TPS: no change. I measured all voltages: seems fine. I
> replaced the engine control unit: no change. I exchange the throttle body
> with all sensors (I stripped a thread when I first tried to take the TPS
> off): no change.
> It is not a fake error because the performance is really bad. The car stalls
> when you aproach a stop sign, the idle goes down to 300rev when I get of the
> throttle. And when I first start the car I need 3 times to start it.
> I also checked the wires to the ECU and they seem fine.
> Any thoughts if I am mislead by the error message of the OBD?
> Thanks in advance
>
> Jo
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
76
May 16, 2004 07:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)