96 Jeep GC Front End Grinding
#21
Guest
Posts: n/a
Re: 96 Jeep GC Front End Grinding
Thanks for the follow up!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
blacice1 wrote:
>
> Update on My Jeep. I did not think it was my CV joints because both of
> my axel shafts are brand new. It did turn out to be a CV joint though,
> however the CV joint in the front Driveshaft. The joint showed no outer
> signs of problems, the covering was still in tact, and it did not
> wobbel when the car was in gear on a lift. The noises my car was making
> baffled a lot of people. It was however defective. I also found out
> that Jeep Grand Cherokee Driveshafts are a rather large pain to find
> (because there are multiple kinds for the same vehicles) and a rip off
> to rebuild, because of the stupid CV joint. I did manage to find one
> that is remanufactured, being shipped to me for $195. Thanks to
> everyone for your help. I hope this may help someone else as well.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
blacice1 wrote:
>
> Update on My Jeep. I did not think it was my CV joints because both of
> my axel shafts are brand new. It did turn out to be a CV joint though,
> however the CV joint in the front Driveshaft. The joint showed no outer
> signs of problems, the covering was still in tact, and it did not
> wobbel when the car was in gear on a lift. The noises my car was making
> baffled a lot of people. It was however defective. I also found out
> that Jeep Grand Cherokee Driveshafts are a rather large pain to find
> (because there are multiple kinds for the same vehicles) and a rip off
> to rebuild, because of the stupid CV joint. I did manage to find one
> that is remanufactured, being shipped to me for $195. Thanks to
> everyone for your help. I hope this may help someone else as well.
#22
Guest
Posts: n/a
Re: 96 Jeep GC Front End Grinding
Thanks for the follow up!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
blacice1 wrote:
>
> Update on My Jeep. I did not think it was my CV joints because both of
> my axel shafts are brand new. It did turn out to be a CV joint though,
> however the CV joint in the front Driveshaft. The joint showed no outer
> signs of problems, the covering was still in tact, and it did not
> wobbel when the car was in gear on a lift. The noises my car was making
> baffled a lot of people. It was however defective. I also found out
> that Jeep Grand Cherokee Driveshafts are a rather large pain to find
> (because there are multiple kinds for the same vehicles) and a rip off
> to rebuild, because of the stupid CV joint. I did manage to find one
> that is remanufactured, being shipped to me for $195. Thanks to
> everyone for your help. I hope this may help someone else as well.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
blacice1 wrote:
>
> Update on My Jeep. I did not think it was my CV joints because both of
> my axel shafts are brand new. It did turn out to be a CV joint though,
> however the CV joint in the front Driveshaft. The joint showed no outer
> signs of problems, the covering was still in tact, and it did not
> wobbel when the car was in gear on a lift. The noises my car was making
> baffled a lot of people. It was however defective. I also found out
> that Jeep Grand Cherokee Driveshafts are a rather large pain to find
> (because there are multiple kinds for the same vehicles) and a rip off
> to rebuild, because of the stupid CV joint. I did manage to find one
> that is remanufactured, being shipped to me for $195. Thanks to
> everyone for your help. I hope this may help someone else as well.
Thread
Thread Starter
Forum
Replies
Last Post
tbills
Jeep Mailing List
48
03-09-2006 03:06 AM
Le Chaud Lapin
Jeep Mailing List
30
11-08-2003 10:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)