95 ZJ Distributor cap
#1
Guest
Posts: n/a
95 ZJ Distributor cap
Someone thought it would be funny to remove the wires on my 4.0's
distributor.....does anyone have a pic or know where I can find one online
that can show me where each wire goes....I've tried toguess but backfires..
Please excuse my mechanical ignorance....
Thank you in advance! Jeff
distributor.....does anyone have a pic or know where I can find one online
that can show me where each wire goes....I've tried toguess but backfires..
Please excuse my mechanical ignorance....
Thank you in advance! Jeff
#2
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
Jeff did pass the time by typing:
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
#3
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
Jeff did pass the time by typing:
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
#4
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
Jeff did pass the time by typing:
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
#5
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
Jeff did pass the time by typing:
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
http://members.***.net/wilsond/Fixes/diagnostics.html
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
#6
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
In 'theory' it should be like my 4.0 because the distributor is only
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
#7
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
In 'theory' it should be like my 4.0 because the distributor is only
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
#8
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
In 'theory' it should be like my 4.0 because the distributor is only
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
#9
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
In 'theory' it should be like my 4.0 because the distributor is only
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
supposed to fit one way.
This puts #1 the farthest away from the engine block. The order is
clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff wrote:
>
> Someone thought it would be funny to remove the wires on my 4.0's
> distributor.....does anyone have a pic or know where I can find one online
> that can show me where each wire goes....I've tried toguess but backfires..
> Please excuse my mechanical ignorance....
> Thank you in advance! Jeff
#10
Guest
Posts: n/a
Re: 95 ZJ Distributor cap
Awesome! Thanks Doug.... great website!
she's up and runnin' again!
and thanks to you aswell Mike....your good! u r right!
Jeff
'95 ZJ
'03 TJ
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4093B737.3D600637@sympatico.ca...
> In 'theory' it should be like my 4.0 because the distributor is only
> supposed to fit one way.
>
> This puts #1 the farthest away from the engine block. The order is
> clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeff wrote:
> >
> > Someone thought it would be funny to remove the wires on my 4.0's
> > distributor.....does anyone have a pic or know where I can find one
online
> > that can show me where each wire goes....I've tried toguess but
backfires..
> > Please excuse my mechanical ignorance....
> > Thank you in advance! Jeff
she's up and runnin' again!
and thanks to you aswell Mike....your good! u r right!
Jeff
'95 ZJ
'03 TJ
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4093B737.3D600637@sympatico.ca...
> In 'theory' it should be like my 4.0 because the distributor is only
> supposed to fit one way.
>
> This puts #1 the farthest away from the engine block. The order is
> clockwise from #1 and goes 1, 5, 3, 6, 2, 4.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeff wrote:
> >
> > Someone thought it would be funny to remove the wires on my 4.0's
> > distributor.....does anyone have a pic or know where I can find one
online
> > that can show me where each wire goes....I've tried toguess but
backfires..
> > Please excuse my mechanical ignorance....
> > Thank you in advance! Jeff