95 XJ rocker panels
03-24-2005, 05:31 PM
#2
Guest
Posts: n/a
Re: 95 XJ rocker panels
After shredding my stock rockers on the trail, I replaced them with
2x6x3/16" box tube steel.
http://xjeep.dyndns.org/rockers/rocker-profile.png
http://xjeep.dyndns.org/rockers/
Didn't cost much for the steel, pretty easy to build and install with a
grinder and a mig welder. Mine also double as cushion tanks for onboard
compressed air system.
Highly recommend something like this if you do any off roading. If not,
sheet metal is cheaper and perhaps a bit easier.
Steve
http://xjeep.dyndns.org
TF wrote:
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
>
2x6x3/16" box tube steel.
http://xjeep.dyndns.org/rockers/rocker-profile.png
http://xjeep.dyndns.org/rockers/
Didn't cost much for the steel, pretty easy to build and install with a
grinder and a mig welder. Mine also double as cushion tanks for onboard
compressed air system.
Highly recommend something like this if you do any off roading. If not,
sheet metal is cheaper and perhaps a bit easier.
Steve
http://xjeep.dyndns.org
TF wrote:
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
>
03-24-2005, 05:31 PM
#3
Guest
Posts: n/a
Re: 95 XJ rocker panels
After shredding my stock rockers on the trail, I replaced them with
2x6x3/16" box tube steel.
http://xjeep.dyndns.org/rockers/rocker-profile.png
http://xjeep.dyndns.org/rockers/
Didn't cost much for the steel, pretty easy to build and install with a
grinder and a mig welder. Mine also double as cushion tanks for onboard
compressed air system.
Highly recommend something like this if you do any off roading. If not,
sheet metal is cheaper and perhaps a bit easier.
Steve
http://xjeep.dyndns.org
TF wrote:
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
>
2x6x3/16" box tube steel.
http://xjeep.dyndns.org/rockers/rocker-profile.png
http://xjeep.dyndns.org/rockers/
Didn't cost much for the steel, pretty easy to build and install with a
grinder and a mig welder. Mine also double as cushion tanks for onboard
compressed air system.
Highly recommend something like this if you do any off roading. If not,
sheet metal is cheaper and perhaps a bit easier.
Steve
http://xjeep.dyndns.org
TF wrote:
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
>
03-24-2005, 05:31 PM
#4
Guest
Posts: n/a
Re: 95 XJ rocker panels
After shredding my stock rockers on the trail, I replaced them with
2x6x3/16" box tube steel.
http://xjeep.dyndns.org/rockers/rocker-profile.png
http://xjeep.dyndns.org/rockers/
Didn't cost much for the steel, pretty easy to build and install with a
grinder and a mig welder. Mine also double as cushion tanks for onboard
compressed air system.
Highly recommend something like this if you do any off roading. If not,
sheet metal is cheaper and perhaps a bit easier.
Steve
http://xjeep.dyndns.org
TF wrote:
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
>
2x6x3/16" box tube steel.
http://xjeep.dyndns.org/rockers/rocker-profile.png
http://xjeep.dyndns.org/rockers/
Didn't cost much for the steel, pretty easy to build and install with a
grinder and a mig welder. Mine also double as cushion tanks for onboard
compressed air system.
Highly recommend something like this if you do any off roading. If not,
sheet metal is cheaper and perhaps a bit easier.
Steve
http://xjeep.dyndns.org
TF wrote:
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
>
03-24-2005, 05:42 PM
#5
Guest
Posts: n/a
Re: 95 XJ rocker panels
Good job: http://xjeep.dyndns.org/rockers/IMG_4365.JPG
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> After shredding my stock rockers on the trail, I replaced them with
> 2x6x3/16" box tube steel.
>
> http://xjeep.dyndns.org/rockers/rocker-profile.png
> http://xjeep.dyndns.org/rockers/
>
> Didn't cost much for the steel, pretty easy to build and install with a
> grinder and a mig welder. Mine also double as cushion tanks for onboard
> compressed air system.
>
> Highly recommend something like this if you do any off roading. If not,
> sheet metal is cheaper and perhaps a bit easier.
>
> Steve
> http://xjeep.dyndns.org
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> After shredding my stock rockers on the trail, I replaced them with
> 2x6x3/16" box tube steel.
>
> http://xjeep.dyndns.org/rockers/rocker-profile.png
> http://xjeep.dyndns.org/rockers/
>
> Didn't cost much for the steel, pretty easy to build and install with a
> grinder and a mig welder. Mine also double as cushion tanks for onboard
> compressed air system.
>
> Highly recommend something like this if you do any off roading. If not,
> sheet metal is cheaper and perhaps a bit easier.
>
> Steve
> http://xjeep.dyndns.org
03-24-2005, 05:42 PM
#6
Guest
Posts: n/a
Re: 95 XJ rocker panels
Good job: http://xjeep.dyndns.org/rockers/IMG_4365.JPG
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> After shredding my stock rockers on the trail, I replaced them with
> 2x6x3/16" box tube steel.
>
> http://xjeep.dyndns.org/rockers/rocker-profile.png
> http://xjeep.dyndns.org/rockers/
>
> Didn't cost much for the steel, pretty easy to build and install with a
> grinder and a mig welder. Mine also double as cushion tanks for onboard
> compressed air system.
>
> Highly recommend something like this if you do any off roading. If not,
> sheet metal is cheaper and perhaps a bit easier.
>
> Steve
> http://xjeep.dyndns.org
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> After shredding my stock rockers on the trail, I replaced them with
> 2x6x3/16" box tube steel.
>
> http://xjeep.dyndns.org/rockers/rocker-profile.png
> http://xjeep.dyndns.org/rockers/
>
> Didn't cost much for the steel, pretty easy to build and install with a
> grinder and a mig welder. Mine also double as cushion tanks for onboard
> compressed air system.
>
> Highly recommend something like this if you do any off roading. If not,
> sheet metal is cheaper and perhaps a bit easier.
>
> Steve
> http://xjeep.dyndns.org
03-24-2005, 05:42 PM
#7
Guest
Posts: n/a
Re: 95 XJ rocker panels
Good job: http://xjeep.dyndns.org/rockers/IMG_4365.JPG
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> After shredding my stock rockers on the trail, I replaced them with
> 2x6x3/16" box tube steel.
>
> http://xjeep.dyndns.org/rockers/rocker-profile.png
> http://xjeep.dyndns.org/rockers/
>
> Didn't cost much for the steel, pretty easy to build and install with a
> grinder and a mig welder. Mine also double as cushion tanks for onboard
> compressed air system.
>
> Highly recommend something like this if you do any off roading. If not,
> sheet metal is cheaper and perhaps a bit easier.
>
> Steve
> http://xjeep.dyndns.org
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Steve wrote:
>
> After shredding my stock rockers on the trail, I replaced them with
> 2x6x3/16" box tube steel.
>
> http://xjeep.dyndns.org/rockers/rocker-profile.png
> http://xjeep.dyndns.org/rockers/
>
> Didn't cost much for the steel, pretty easy to build and install with a
> grinder and a mig welder. Mine also double as cushion tanks for onboard
> compressed air system.
>
> Highly recommend something like this if you do any off roading. If not,
> sheet metal is cheaper and perhaps a bit easier.
>
> Steve
> http://xjeep.dyndns.org
03-24-2005, 06:44 PM
#8
Guest
Posts: n/a
Re: 95 XJ rocker panels
Look around you can find replacement panels for as little as $60 per side.
They do require trimming and complete removal of the old ones, you will also
have to remove the fender flares runningboards if you have them. I just
used some light gauge sheet metal I already had (left overs from doing my
floors) to form more of a cover, I removed about 90% of the old rocker (85%
was rusted out).
Snow...
"TF" <flannery16@insightbb.com> wrote in message
news:gHG0e.16081$fn3.14775@attbi_s01...
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
They do require trimming and complete removal of the old ones, you will also
have to remove the fender flares runningboards if you have them. I just
used some light gauge sheet metal I already had (left overs from doing my
floors) to form more of a cover, I removed about 90% of the old rocker (85%
was rusted out).
Snow...
"TF" <flannery16@insightbb.com> wrote in message
news:gHG0e.16081$fn3.14775@attbi_s01...
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
03-24-2005, 06:44 PM
#9
Guest
Posts: n/a
Re: 95 XJ rocker panels
Look around you can find replacement panels for as little as $60 per side.
They do require trimming and complete removal of the old ones, you will also
have to remove the fender flares runningboards if you have them. I just
used some light gauge sheet metal I already had (left overs from doing my
floors) to form more of a cover, I removed about 90% of the old rocker (85%
was rusted out).
Snow...
"TF" <flannery16@insightbb.com> wrote in message
news:gHG0e.16081$fn3.14775@attbi_s01...
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
They do require trimming and complete removal of the old ones, you will also
have to remove the fender flares runningboards if you have them. I just
used some light gauge sheet metal I already had (left overs from doing my
floors) to form more of a cover, I removed about 90% of the old rocker (85%
was rusted out).
Snow...
"TF" <flannery16@insightbb.com> wrote in message
news:gHG0e.16081$fn3.14775@attbi_s01...
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
03-24-2005, 06:44 PM
#10
Guest
Posts: n/a
Re: 95 XJ rocker panels
Look around you can find replacement panels for as little as $60 per side.
They do require trimming and complete removal of the old ones, you will also
have to remove the fender flares runningboards if you have them. I just
used some light gauge sheet metal I already had (left overs from doing my
floors) to form more of a cover, I removed about 90% of the old rocker (85%
was rusted out).
Snow...
"TF" <flannery16@insightbb.com> wrote in message
news:gHG0e.16081$fn3.14775@attbi_s01...
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>
They do require trimming and complete removal of the old ones, you will also
have to remove the fender flares runningboards if you have them. I just
used some light gauge sheet metal I already had (left overs from doing my
floors) to form more of a cover, I removed about 90% of the old rocker (85%
was rusted out).
Snow...
"TF" <flannery16@insightbb.com> wrote in message
news:gHG0e.16081$fn3.14775@attbi_s01...
> Anyone replaced rusted out rocker panels?
> Any tips or where to buy both sides?
> Replaced floor on pass side now for this.....
>
> Thanks
>