95 grand cherokee 4.0 inline 6
01-20-2007, 09:53 PM
#1
Guest
Posts: n/a
95 grand cherokee 4.0 inline 6
i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
for some reason its runnign rough. is there anyway the timming jumped
just by changing the manifold. if not, any suggestions why it might
be running rough. it was intitially kind of hard to get it started when
i finally got it started it just sounds like somthing is wrong. please
please help anyone, anyone at all.
for some reason its runnign rough. is there anyway the timming jumped
just by changing the manifold. if not, any suggestions why it might
be running rough. it was intitially kind of hard to get it started when
i finally got it started it just sounds like somthing is wrong. please
please help anyone, anyone at all.
01-20-2007, 10:00 PM
#2
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
01-20-2007, 10:00 PM
#3
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
01-20-2007, 10:00 PM
#4
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
01-20-2007, 10:00 PM
#5
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
Recheck all connections, don't panic.
Earle
"nathan" <nathanwatson8@hotmail.com> wrote in message
news:1169348011.768803.217090@11g2000cwr.googlegro ups.com...
> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and now
> for some reason its runnign rough. is there anyway the timming jumped
> just by changing the manifold. if not, any suggestions why it might
> be running rough. it was intitially kind of hard to get it started when
> i finally got it started it just sounds like somthing is wrong. please
> please help anyone, anyone at all.
>
01-20-2007, 10:03 PM
#6
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
Earle Horton wrote:
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
01-20-2007, 10:03 PM
#7
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
Earle Horton wrote:
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
01-20-2007, 10:03 PM
#8
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
Earle Horton wrote:
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
01-20-2007, 10:03 PM
#9
Guest
Posts: n/a
Re: 95 grand cherokee 4.0 inline 6
Earle Horton wrote:
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
> I am guessing you knocked a sensor wire loose or maybe a vacuum hose.
> Recheck all connections, don't panic.
> "nathan" wrote...
>> i just changed the exhaust manifold on my 95 jeep cherokee 4.0 and
>> now for some reason its runnign rough. is there anyway the timming
>> jumped just by changing the manifold. if not, any suggestions why
>> it might be running rough. it was intitially kind of hard to get it
>> started when i finally got it started it just sounds like somthing
>> is wrong. please please help anyone, anyone at all.
Check the O2 sensor wire and connector.
Let the system run for a while because there is a massive
amount of air in the fuel rail now. That will make for some
rough running till it all clears out. On the 93 because the feed
and return are at the front, I had to drive the jeep up on a curb
to free bubbles that were stuck back by injector 6.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
oscarpro
Jeep Cherokee Forum
0
08-05-2012 02:33 PM
Johnny641
Jeep Mailing List
48
11-27-2005 10:56 AM
CJ7 Casey
Jeep Mailing List
111
02-24-2005 05:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)