93 YJ rear end
03-23-2005, 07:01 PM
#21
Guest
Posts: n/a
Re: 93 YJ rear end
I have very limited knowledge of rear ends,,,,,
So you're saying that the 35 even geared up may not be sufficient,,, is the
difference between a 35 and 44 axle diameter?
thanks again
jaco
"SoK66" <SoK66@frontier.net> wrote in message
news:d1qr5h02a0l@enews1.newsguy.com...
>
> "jaco" <jaco@wi.rr.com> wrote in message
> news:6K50e.12621$gx3.7176@tornado.rdc-kc.rr.com...
>>I do want to add a locker of some type - this is a daily driver (90%) but
>>when I go off-road I would prefer having the confidence of a tight rear
>>end.
>>
>> I've spoke with 2 shops and they both are recommending higher gears and
>> posi-trac for about $2,000 - does this sound reasonable?
>>
>
> It depends. For my money I wouldn't spend a nickel on a Dana 35 rear end.
> Money is much better spent on a salvaged TJ D44, which you can easily
> adapt by cutting off the spring buckets & trailing arm tabs & installing
> spring pads for the YJs leaf springs. Add gears & a locker and you're rear
> end hassles are over up to 35" tires.
>
> If you must keep the D35, look into one of the Super 35 kits. These have
> Detroit Lockers which can be a handful if you're planning it to be
> primarily a street vehicle.
>
So you're saying that the 35 even geared up may not be sufficient,,, is the
difference between a 35 and 44 axle diameter?
thanks again
jaco
"SoK66" <SoK66@frontier.net> wrote in message
news:d1qr5h02a0l@enews1.newsguy.com...
>
> "jaco" <jaco@wi.rr.com> wrote in message
> news:6K50e.12621$gx3.7176@tornado.rdc-kc.rr.com...
>>I do want to add a locker of some type - this is a daily driver (90%) but
>>when I go off-road I would prefer having the confidence of a tight rear
>>end.
>>
>> I've spoke with 2 shops and they both are recommending higher gears and
>> posi-trac for about $2,000 - does this sound reasonable?
>>
>
> It depends. For my money I wouldn't spend a nickel on a Dana 35 rear end.
> Money is much better spent on a salvaged TJ D44, which you can easily
> adapt by cutting off the spring buckets & trailing arm tabs & installing
> spring pads for the YJs leaf springs. Add gears & a locker and you're rear
> end hassles are over up to 35" tires.
>
> If you must keep the D35, look into one of the Super 35 kits. These have
> Detroit Lockers which can be a handful if you're planning it to be
> primarily a street vehicle.
>
03-23-2005, 07:01 PM
#22
Guest
Posts: n/a
Re: 93 YJ rear end
I have very limited knowledge of rear ends,,,,,
So you're saying that the 35 even geared up may not be sufficient,,, is the
difference between a 35 and 44 axle diameter?
thanks again
jaco
"SoK66" <SoK66@frontier.net> wrote in message
news:d1qr5h02a0l@enews1.newsguy.com...
>
> "jaco" <jaco@wi.rr.com> wrote in message
> news:6K50e.12621$gx3.7176@tornado.rdc-kc.rr.com...
>>I do want to add a locker of some type - this is a daily driver (90%) but
>>when I go off-road I would prefer having the confidence of a tight rear
>>end.
>>
>> I've spoke with 2 shops and they both are recommending higher gears and
>> posi-trac for about $2,000 - does this sound reasonable?
>>
>
> It depends. For my money I wouldn't spend a nickel on a Dana 35 rear end.
> Money is much better spent on a salvaged TJ D44, which you can easily
> adapt by cutting off the spring buckets & trailing arm tabs & installing
> spring pads for the YJs leaf springs. Add gears & a locker and you're rear
> end hassles are over up to 35" tires.
>
> If you must keep the D35, look into one of the Super 35 kits. These have
> Detroit Lockers which can be a handful if you're planning it to be
> primarily a street vehicle.
>
So you're saying that the 35 even geared up may not be sufficient,,, is the
difference between a 35 and 44 axle diameter?
thanks again
jaco
"SoK66" <SoK66@frontier.net> wrote in message
news:d1qr5h02a0l@enews1.newsguy.com...
>
> "jaco" <jaco@wi.rr.com> wrote in message
> news:6K50e.12621$gx3.7176@tornado.rdc-kc.rr.com...
>>I do want to add a locker of some type - this is a daily driver (90%) but
>>when I go off-road I would prefer having the confidence of a tight rear
>>end.
>>
>> I've spoke with 2 shops and they both are recommending higher gears and
>> posi-trac for about $2,000 - does this sound reasonable?
>>
>
> It depends. For my money I wouldn't spend a nickel on a Dana 35 rear end.
> Money is much better spent on a salvaged TJ D44, which you can easily
> adapt by cutting off the spring buckets & trailing arm tabs & installing
> spring pads for the YJs leaf springs. Add gears & a locker and you're rear
> end hassles are over up to 35" tires.
>
> If you must keep the D35, look into one of the Super 35 kits. These have
> Detroit Lockers which can be a handful if you're planning it to be
> primarily a street vehicle.
>
03-23-2005, 07:55 PM
#23
Guest
Posts: n/a
Re: 93 YJ rear end
http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
jaco wrote:
>
> I have very limited knowledge of rear ends,,,,,
> So you're saying that the 35 even geared up may not be sufficient,,, is the
> difference between a 35 and 44 axle diameter?
God Bless America, ßill O|||||||O
mailto:--------------------
jaco wrote:
>
> I have very limited knowledge of rear ends,,,,,
> So you're saying that the 35 even geared up may not be sufficient,,, is the
> difference between a 35 and 44 axle diameter?
03-23-2005, 07:55 PM
#24
Guest
Posts: n/a
Re: 93 YJ rear end
http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
jaco wrote:
>
> I have very limited knowledge of rear ends,,,,,
> So you're saying that the 35 even geared up may not be sufficient,,, is the
> difference between a 35 and 44 axle diameter?
God Bless America, ßill O|||||||O
mailto:--------------------
jaco wrote:
>
> I have very limited knowledge of rear ends,,,,,
> So you're saying that the 35 even geared up may not be sufficient,,, is the
> difference between a 35 and 44 axle diameter?
03-23-2005, 07:55 PM
#25
Guest
Posts: n/a
Re: 93 YJ rear end
http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------
jaco wrote:
>
> I have very limited knowledge of rear ends,,,,,
> So you're saying that the 35 even geared up may not be sufficient,,, is the
> difference between a 35 and 44 axle diameter?
God Bless America, ßill O|||||||O
mailto:--------------------
jaco wrote:
>
> I have very limited knowledge of rear ends,,,,,
> So you're saying that the 35 even geared up may not be sufficient,,, is the
> difference between a 35 and 44 axle diameter?
03-24-2005, 07:00 PM
#26
Guest
Posts: n/a
Re: 93 YJ rear end
So what you're trying to tell me Bill is that I REALLY should upgrade to the
44.........
thanks for the tip ;-)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42420FFA.E00849BA@***.net...
> http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> jaco wrote:
>>
>> I have very limited knowledge of rear ends,,,,,
>> So you're saying that the 35 even geared up may not be sufficient,,, is
>> the
>> difference between a 35 and 44 axle diameter?
44.........
thanks for the tip ;-)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42420FFA.E00849BA@***.net...
> http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> jaco wrote:
>>
>> I have very limited knowledge of rear ends,,,,,
>> So you're saying that the 35 even geared up may not be sufficient,,, is
>> the
>> difference between a 35 and 44 axle diameter?
03-24-2005, 07:00 PM
#27
Guest
Posts: n/a
Re: 93 YJ rear end
So what you're trying to tell me Bill is that I REALLY should upgrade to the
44.........
thanks for the tip ;-)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42420FFA.E00849BA@***.net...
> http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> jaco wrote:
>>
>> I have very limited knowledge of rear ends,,,,,
>> So you're saying that the 35 even geared up may not be sufficient,,, is
>> the
>> difference between a 35 and 44 axle diameter?
44.........
thanks for the tip ;-)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42420FFA.E00849BA@***.net...
> http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> jaco wrote:
>>
>> I have very limited knowledge of rear ends,,,,,
>> So you're saying that the 35 even geared up may not be sufficient,,, is
>> the
>> difference between a 35 and 44 axle diameter?
03-24-2005, 07:00 PM
#28
Guest
Posts: n/a
Re: 93 YJ rear end
So what you're trying to tell me Bill is that I REALLY should upgrade to the
44.........
thanks for the tip ;-)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42420FFA.E00849BA@***.net...
> http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> jaco wrote:
>>
>> I have very limited knowledge of rear ends,,,,,
>> So you're saying that the 35 even geared up may not be sufficient,,, is
>> the
>> difference between a 35 and 44 axle diameter?
44.........
thanks for the tip ;-)
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42420FFA.E00849BA@***.net...
> http://www.----------.com/dana35c/
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> jaco wrote:
>>
>> I have very limited knowledge of rear ends,,,,,
>> So you're saying that the 35 even geared up may not be sufficient,,, is
>> the
>> difference between a 35 and 44 axle diameter?
03-24-2005, 07:08 PM
#29
Guest
Posts: n/a
Re: 93 YJ rear end
Most of those fools deserved to blow things up... I sure didn't see
many 31's in those photos either. LOL!
Your 35 should do just fine with the stock gears unless you plan on some
insane off roading.....
Just my $0.02,
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
jaco wrote:
>
> So what you're trying to tell me Bill is that I REALLY should upgrade to the
> 44.........
> thanks for the tip ;-)
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42420FFA.E00849BA@***.net...
> > http://www.----------.com/dana35c/
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > jaco wrote:
> >>
> >> I have very limited knowledge of rear ends,,,,,
> >> So you're saying that the 35 even geared up may not be sufficient,,, is
> >> the
> >> difference between a 35 and 44 axle diameter?
many 31's in those photos either. LOL!
Your 35 should do just fine with the stock gears unless you plan on some
insane off roading.....
Just my $0.02,
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
jaco wrote:
>
> So what you're trying to tell me Bill is that I REALLY should upgrade to the
> 44.........
> thanks for the tip ;-)
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42420FFA.E00849BA@***.net...
> > http://www.----------.com/dana35c/
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > jaco wrote:
> >>
> >> I have very limited knowledge of rear ends,,,,,
> >> So you're saying that the 35 even geared up may not be sufficient,,, is
> >> the
> >> difference between a 35 and 44 axle diameter?
03-24-2005, 07:08 PM
#30
Guest
Posts: n/a
Re: 93 YJ rear end
Most of those fools deserved to blow things up... I sure didn't see
many 31's in those photos either. LOL!
Your 35 should do just fine with the stock gears unless you plan on some
insane off roading.....
Just my $0.02,
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
jaco wrote:
>
> So what you're trying to tell me Bill is that I REALLY should upgrade to the
> 44.........
> thanks for the tip ;-)
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42420FFA.E00849BA@***.net...
> > http://www.----------.com/dana35c/
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > jaco wrote:
> >>
> >> I have very limited knowledge of rear ends,,,,,
> >> So you're saying that the 35 even geared up may not be sufficient,,, is
> >> the
> >> difference between a 35 and 44 axle diameter?
many 31's in those photos either. LOL!
Your 35 should do just fine with the stock gears unless you plan on some
insane off roading.....
Just my $0.02,
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
jaco wrote:
>
> So what you're trying to tell me Bill is that I REALLY should upgrade to the
> 44.........
> thanks for the tip ;-)
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:42420FFA.E00849BA@***.net...
> > http://www.----------.com/dana35c/
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> >
> > jaco wrote:
> >>
> >> I have very limited knowledge of rear ends,,,,,
> >> So you're saying that the 35 even geared up may not be sufficient,,, is
> >> the
> >> difference between a 35 and 44 axle diameter?
