93 YJ front hub Removal
11-21-2003, 01:03 PM
#21
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Either way it still must be removed. Next time use a cold chisel to
split it.
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Roy J wrote:
>
> Thats assuming you can get the hub out of the knuckle. If this is
> the first time, it will be rusted in SOLID.
split it.
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Roy J wrote:
>
> Thats assuming you can get the hub out of the knuckle. If this is
> the first time, it will be rusted in SOLID.
11-21-2003, 01:03 PM
#22
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Either way it still must be removed. Next time use a cold chisel to
split it.
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Roy J wrote:
>
> Thats assuming you can get the hub out of the knuckle. If this is
> the first time, it will be rusted in SOLID.
split it.
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Roy J wrote:
>
> Thats assuming you can get the hub out of the knuckle. If this is
> the first time, it will be rusted in SOLID.
11-21-2003, 01:38 PM
#23
Guest
Posts: n/a
Re: 93 YJ front hub Removal
I use a sacrificial bolt on them.
I take out the 3 bolts, then turn the tire hard and put the extra bolt
in the rear hole and hit it really good with a big hammer.
I have also used a chisel on the ears.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
> >
> > Thats assuming you can get the hub out of the knuckle. If this is
> > the first time, it will be rusted in SOLID.
I take out the 3 bolts, then turn the tire hard and put the extra bolt
in the rear hole and hit it really good with a big hammer.
I have also used a chisel on the ears.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
> >
> > Thats assuming you can get the hub out of the knuckle. If this is
> > the first time, it will be rusted in SOLID.
11-21-2003, 01:38 PM
#24
Guest
Posts: n/a
Re: 93 YJ front hub Removal
I use a sacrificial bolt on them.
I take out the 3 bolts, then turn the tire hard and put the extra bolt
in the rear hole and hit it really good with a big hammer.
I have also used a chisel on the ears.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
> >
> > Thats assuming you can get the hub out of the knuckle. If this is
> > the first time, it will be rusted in SOLID.
I take out the 3 bolts, then turn the tire hard and put the extra bolt
in the rear hole and hit it really good with a big hammer.
I have also used a chisel on the ears.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
> >
> > Thats assuming you can get the hub out of the knuckle. If this is
> > the first time, it will be rusted in SOLID.
11-21-2003, 01:38 PM
#25
Guest
Posts: n/a
Re: 93 YJ front hub Removal
I use a sacrificial bolt on them.
I take out the 3 bolts, then turn the tire hard and put the extra bolt
in the rear hole and hit it really good with a big hammer.
I have also used a chisel on the ears.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
> >
> > Thats assuming you can get the hub out of the knuckle. If this is
> > the first time, it will be rusted in SOLID.
I take out the 3 bolts, then turn the tire hard and put the extra bolt
in the rear hole and hit it really good with a big hammer.
I have also used a chisel on the ears.
Mike
"L.W.(ßill) ------ III" wrote:
>
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
> >
> > Thats assuming you can get the hub out of the knuckle. If this is
> > the first time, it will be rusted in SOLID.
11-21-2003, 09:45 PM
#26
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Explain how a cold chisel will split it? The listed site shows
the hub just falling out in his hand. That wasn't how it worked
on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
in the back) If you think you can get a standard cold chisel
inbetween the knuckle and the hub, you will do a LOT of damage
before the thing will start moving.
L.W.(ßill) ------ III wrote:
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
>
>>Thats assuming you can get the hub out of the knuckle. If this is
>>the first time, it will be rusted in SOLID.
the hub just falling out in his hand. That wasn't how it worked
on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
in the back) If you think you can get a standard cold chisel
inbetween the knuckle and the hub, you will do a LOT of damage
before the thing will start moving.
L.W.(ßill) ------ III wrote:
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
>
>>Thats assuming you can get the hub out of the knuckle. If this is
>>the first time, it will be rusted in SOLID.
11-21-2003, 09:45 PM
#27
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Explain how a cold chisel will split it? The listed site shows
the hub just falling out in his hand. That wasn't how it worked
on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
in the back) If you think you can get a standard cold chisel
inbetween the knuckle and the hub, you will do a LOT of damage
before the thing will start moving.
L.W.(ßill) ------ III wrote:
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
>
>>Thats assuming you can get the hub out of the knuckle. If this is
>>the first time, it will be rusted in SOLID.
the hub just falling out in his hand. That wasn't how it worked
on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
in the back) If you think you can get a standard cold chisel
inbetween the knuckle and the hub, you will do a LOT of damage
before the thing will start moving.
L.W.(ßill) ------ III wrote:
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
>
>>Thats assuming you can get the hub out of the knuckle. If this is
>>the first time, it will be rusted in SOLID.
11-21-2003, 09:45 PM
#28
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Explain how a cold chisel will split it? The listed site shows
the hub just falling out in his hand. That wasn't how it worked
on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
in the back) If you think you can get a standard cold chisel
inbetween the knuckle and the hub, you will do a LOT of damage
before the thing will start moving.
L.W.(ßill) ------ III wrote:
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
>
>>Thats assuming you can get the hub out of the knuckle. If this is
>>the first time, it will be rusted in SOLID.
the hub just falling out in his hand. That wasn't how it worked
on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
in the back) If you think you can get a standard cold chisel
inbetween the knuckle and the hub, you will do a LOT of damage
before the thing will start moving.
L.W.(ßill) ------ III wrote:
> Either way it still must be removed. Next time use a cold chisel to
> split it.
> http://www.madxj.com/MADXJ/technical...97andSeals.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Roy J wrote:
>
>>Thats assuming you can get the hub out of the knuckle. If this is
>>the first time, it will be rusted in SOLID.
11-21-2003, 10:18 PM
#29
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Hi Roy,
Actually I use a paint scrapper and it works very well, if you aim
it right, as if you were about to split a diamond, you may be able to
see it's pinned handle: http://www.----------.com/scraper.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Roy J wrote:
>
> Explain how a cold chisel will split it? The listed site shows
> the hub just falling out in his hand. That wasn't how it worked
> on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
> in the back) If you think you can get a standard cold chisel
> inbetween the knuckle and the hub, you will do a LOT of damage
> before the thing will start moving.
Actually I use a paint scrapper and it works very well, if you aim
it right, as if you were about to split a diamond, you may be able to
see it's pinned handle: http://www.----------.com/scraper.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Roy J wrote:
>
> Explain how a cold chisel will split it? The listed site shows
> the hub just falling out in his hand. That wasn't how it worked
> on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
> in the back) If you think you can get a standard cold chisel
> inbetween the knuckle and the hub, you will do a LOT of damage
> before the thing will start moving.
11-21-2003, 10:18 PM
#30
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Hi Roy,
Actually I use a paint scrapper and it works very well, if you aim
it right, as if you were about to split a diamond, you may be able to
see it's pinned handle: http://www.----------.com/scraper.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Roy J wrote:
>
> Explain how a cold chisel will split it? The listed site shows
> the hub just falling out in his hand. That wasn't how it worked
> on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
> in the back) If you think you can get a standard cold chisel
> inbetween the knuckle and the hub, you will do a LOT of damage
> before the thing will start moving.
Actually I use a paint scrapper and it works very well, if you aim
it right, as if you were about to split a diamond, you may be able to
see it's pinned handle: http://www.----------.com/scraper.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Roy J wrote:
>
> Explain how a cold chisel will split it? The listed site shows
> the hub just falling out in his hand. That wasn't how it worked
> on mine! (land of 10,000 lakes and 20,000 plow trucks with salt
> in the back) If you think you can get a standard cold chisel
> inbetween the knuckle and the hub, you will do a LOT of damage
> before the thing will start moving.
