93 Cherokee Emergency brake lever
04-20-2006, 09:40 PM
#1
Guest
Posts: n/a
93 Cherokee Emergency brake lever
This evening the release button and the spring underneath it popped off
the end of the emergency brake lever. Problem is, it popped off as I
was setting the brake. Now, I don't have a way to release the brake!
The brake is set and I am more-or-less stuck. Fortunately, it happened
at the top of the driveway. My question: is there a way to release the
emergency brake without using the brake lever? As I look into the space
where the button should be located, I see a metal rod, but it is flush
inside the housing where the button used to be located. I did try
pressing the rod with the tip of a screwdriver, but it does not move.
Any suggestions would be most appreciated.
the end of the emergency brake lever. Problem is, it popped off as I
was setting the brake. Now, I don't have a way to release the brake!
The brake is set and I am more-or-less stuck. Fortunately, it happened
at the top of the driveway. My question: is there a way to release the
emergency brake without using the brake lever? As I look into the space
where the button should be located, I see a metal rod, but it is flush
inside the housing where the button used to be located. I did try
pressing the rod with the tip of a screwdriver, but it does not move.
Any suggestions would be most appreciated.
04-20-2006, 10:37 PM
#2
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
There should be an threaded coupler where the main cable splits off to the
right and left side.
Back the nut off until the brakes are released.
If you send an e-mail I can forward the lever removal instructions.
"flydog" <marvinguard-groups@yahoo.com> wrote in message
news:1145583604.614299.266700@i40g2000cwc.googlegr oups.com...
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
>
right and left side.
Back the nut off until the brakes are released.
If you send an e-mail I can forward the lever removal instructions.
"flydog" <marvinguard-groups@yahoo.com> wrote in message
news:1145583604.614299.266700@i40g2000cwc.googlegr oups.com...
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
>
04-20-2006, 10:37 PM
#3
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
There should be an threaded coupler where the main cable splits off to the
right and left side.
Back the nut off until the brakes are released.
If you send an e-mail I can forward the lever removal instructions.
"flydog" <marvinguard-groups@yahoo.com> wrote in message
news:1145583604.614299.266700@i40g2000cwc.googlegr oups.com...
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
>
right and left side.
Back the nut off until the brakes are released.
If you send an e-mail I can forward the lever removal instructions.
"flydog" <marvinguard-groups@yahoo.com> wrote in message
news:1145583604.614299.266700@i40g2000cwc.googlegr oups.com...
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
>
04-20-2006, 10:37 PM
#4
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
There should be an threaded coupler where the main cable splits off to the
right and left side.
Back the nut off until the brakes are released.
If you send an e-mail I can forward the lever removal instructions.
"flydog" <marvinguard-groups@yahoo.com> wrote in message
news:1145583604.614299.266700@i40g2000cwc.googlegr oups.com...
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
>
right and left side.
Back the nut off until the brakes are released.
If you send an e-mail I can forward the lever removal instructions.
"flydog" <marvinguard-groups@yahoo.com> wrote in message
news:1145583604.614299.266700@i40g2000cwc.googlegr oups.com...
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
>
04-21-2006, 12:27 AM
#5
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
flydog did pass the time by typing:
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
If you can get back to the *** end of that handle there is a pawl
that catches. Just release the pawl and you can release the brake.
--
DougW
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
If you can get back to the *** end of that handle there is a pawl
that catches. Just release the pawl and you can release the brake.
--
DougW
04-21-2006, 12:27 AM
#6
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
flydog did pass the time by typing:
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
If you can get back to the *** end of that handle there is a pawl
that catches. Just release the pawl and you can release the brake.
--
DougW
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
If you can get back to the *** end of that handle there is a pawl
that catches. Just release the pawl and you can release the brake.
--
DougW
04-21-2006, 12:27 AM
#7
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
flydog did pass the time by typing:
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
If you can get back to the *** end of that handle there is a pawl
that catches. Just release the pawl and you can release the brake.
--
DougW
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
If you can get back to the *** end of that handle there is a pawl
that catches. Just release the pawl and you can release the brake.
--
DougW
04-21-2006, 12:49 AM
#8
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
An exploded view, may give you an idea:
http://www.----------.com/temp/parkLever.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
flydog wrote:
>
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
http://www.----------.com/temp/parkLever.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
flydog wrote:
>
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
04-21-2006, 12:49 AM
#9
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
An exploded view, may give you an idea:
http://www.----------.com/temp/parkLever.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
flydog wrote:
>
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
http://www.----------.com/temp/parkLever.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
flydog wrote:
>
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
04-21-2006, 12:49 AM
#10
Guest
Posts: n/a
Re: 93 Cherokee Emergency brake lever
An exploded view, may give you an idea:
http://www.----------.com/temp/parkLever.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
flydog wrote:
>
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
http://www.----------.com/temp/parkLever.pdf
God Bless America, Bill O|||||||O
mailto:--------------------
flydog wrote:
>
> This evening the release button and the spring underneath it popped off
> the end of the emergency brake lever. Problem is, it popped off as I
> was setting the brake. Now, I don't have a way to release the brake!
>
> The brake is set and I am more-or-less stuck. Fortunately, it happened
> at the top of the driveway. My question: is there a way to release the
> emergency brake without using the brake lever? As I look into the space
> where the button should be located, I see a metal rod, but it is flush
> inside the housing where the button used to be located. I did try
> pressing the rod with the tip of a screwdriver, but it does not move.
>
> Any suggestions would be most appreciated.
