aGraham

Well replacing the pressure hose wasn't that bad, only problem was
getting the threads to line up at the box, did not want to cross
thread.... oh and accidentally cutting the return hose instead of the
pressure hose added quite a bit more work. I traced the hose with my
eyes and not my finger so when I went to cut it to get a socket on it, I
cut the wrong hose. Spent about an hour trying to get that out of the
box, but then used a tubing cutter to cut it straight, the cut crushed
it, then was able to slip the rubber hose back over it.


In article <V4Upf.2135$%N1.229366@news20.bellglobal.com>,
"Snow" <snowbal99@sympatico.ca> wrote:

> Yes pulling the return hose will break the plastic nipple on the reservoir,
> had to modify the return hose and nipple (or lack there of) on my 93.
>
> Snow...
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:4cHpf.31477$---.15468@dukeread07...
> > Snow did pass the time by typing:
> >> Yup its a 4 or 5 beer job (one beer per hose and 3 extra's for after).
> >> I suggest you order both the pressure and return hoses before you start,
> >> soak the fittings (both pump and steering box) with release-all (or
> >> equivalent).
> >>
> >> I assume your changing the hose's due to them leaking, is the leak on the
> >> hose or at a fitting? if its at the fittings, I would suggest buying the
> >> return hose from the stealership, as the return hose from them
> >> (stealership)
> >> will come with the fitting for the steering box, most after market
> >> return
> >> hoses are just a length of hose you splice onto the fitting.
> >
> > One thing to add.
> >
> > Remove the old return hose by splitting it carefully with
> > a knife, then peeling it away from the plastic reservoir.
> > Pulling can break that plastic attachment.
> >
> > I made my own return hose with equivalent stuff from NAPA.
> > Except I made it about a foot longer. The eventual goal
> > is to install a filter, which will also act as an extra
> > reservoir and cooler.
> >
> > --
> > DougW
> >
>
>

--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)

aGraham

Well replacing the pressure hose wasn't that bad, only problem was
getting the threads to line up at the box, did not want to cross
thread.... oh and accidentally cutting the return hose instead of the
pressure hose added quite a bit more work. I traced the hose with my
eyes and not my finger so when I went to cut it to get a socket on it, I
cut the wrong hose. Spent about an hour trying to get that out of the
box, but then used a tubing cutter to cut it straight, the cut crushed
it, then was able to slip the rubber hose back over it.


In article <V4Upf.2135$%N1.229366@news20.bellglobal.com>,
"Snow" <snowbal99@sympatico.ca> wrote:

> Yes pulling the return hose will break the plastic nipple on the reservoir,
> had to modify the return hose and nipple (or lack there of) on my 93.
>
> Snow...
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:4cHpf.31477$---.15468@dukeread07...
> > Snow did pass the time by typing:
> >> Yup its a 4 or 5 beer job (one beer per hose and 3 extra's for after).
> >> I suggest you order both the pressure and return hoses before you start,
> >> soak the fittings (both pump and steering box) with release-all (or
> >> equivalent).
> >>
> >> I assume your changing the hose's due to them leaking, is the leak on the
> >> hose or at a fitting? if its at the fittings, I would suggest buying the
> >> return hose from the stealership, as the return hose from them
> >> (stealership)
> >> will come with the fitting for the steering box, most after market
> >> return
> >> hoses are just a length of hose you splice onto the fitting.
> >
> > One thing to add.
> >
> > Remove the old return hose by splitting it carefully with
> > a knife, then peeling it away from the plastic reservoir.
> > Pulling can break that plastic attachment.
> >
> > I made my own return hose with equivalent stuff from NAPA.
> > Except I made it about a foot longer. The eventual goal
> > is to install a filter, which will also act as an extra
> > reservoir and cooler.
> >
> > --
> > DougW
> >
>
>

--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)

aGraham

Well replacing the pressure hose wasn't that bad, only problem was
getting the threads to line up at the box, did not want to cross
thread.... oh and accidentally cutting the return hose instead of the
pressure hose added quite a bit more work. I traced the hose with my
eyes and not my finger so when I went to cut it to get a socket on it, I
cut the wrong hose. Spent about an hour trying to get that out of the
box, but then used a tubing cutter to cut it straight, the cut crushed
it, then was able to slip the rubber hose back over it.


In article <V4Upf.2135$%N1.229366@news20.bellglobal.com>,
"Snow" <snowbal99@sympatico.ca> wrote:

> Yes pulling the return hose will break the plastic nipple on the reservoir,
> had to modify the return hose and nipple (or lack there of) on my 93.
>
> Snow...
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:4cHpf.31477$---.15468@dukeread07...
> > Snow did pass the time by typing:
> >> Yup its a 4 or 5 beer job (one beer per hose and 3 extra's for after).
> >> I suggest you order both the pressure and return hoses before you start,
> >> soak the fittings (both pump and steering box) with release-all (or
> >> equivalent).
> >>
> >> I assume your changing the hose's due to them leaking, is the leak on the
> >> hose or at a fitting? if its at the fittings, I would suggest buying the
> >> return hose from the stealership, as the return hose from them
> >> (stealership)
> >> will come with the fitting for the steering box, most after market
> >> return
> >> hoses are just a length of hose you splice onto the fitting.
> >
> > One thing to add.
> >
> > Remove the old return hose by splitting it carefully with
> > a knife, then peeling it away from the plastic reservoir.
> > Pulling can break that plastic attachment.
> >
> > I made my own return hose with equivalent stuff from NAPA.
> > Except I made it about a foot longer. The eventual goal
> > is to install a filter, which will also act as an extra
> > reservoir and cooler.
> >
> > --
> > DougW
> >
>
>

--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)