91 YJ - rolled it... totaled it
11-09-2004, 11:20 AM
#21
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
Agreed!
He can get a new 'glass body made right here in Ontario for under
$2K....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> Agreed, although I am not machanically inclined it would take a lot for me
> to say my jeep was totaled, since insurance isn't going to pay, you are
> going to have to go by something else to drive for say $5,000.00, why not
> just put that into repairing your jeep.
>
> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> > You are not the first to roll a jeep. Jeeps are rugged, if you are
> > just using it for offroading or a fun vehicle keep it. You can find
> > tons of parts from old jeeps to replace it. Take a look at some of
> > the other jeeps that people drive on the trail, most have been beaten
> > up badly. It does not take much to fix it up for the trail and
> > replace the parts. A hammer is really cheap! I really doubt that you
> > totaled it you just add some character to it.
He can get a new 'glass body made right here in Ontario for under
$2K....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> Agreed, although I am not machanically inclined it would take a lot for me
> to say my jeep was totaled, since insurance isn't going to pay, you are
> going to have to go by something else to drive for say $5,000.00, why not
> just put that into repairing your jeep.
>
> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> > You are not the first to roll a jeep. Jeeps are rugged, if you are
> > just using it for offroading or a fun vehicle keep it. You can find
> > tons of parts from old jeeps to replace it. Take a look at some of
> > the other jeeps that people drive on the trail, most have been beaten
> > up badly. It does not take much to fix it up for the trail and
> > replace the parts. A hammer is really cheap! I really doubt that you
> > totaled it you just add some character to it.
11-09-2004, 11:20 AM
#22
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
Agreed!
He can get a new 'glass body made right here in Ontario for under
$2K....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> Agreed, although I am not machanically inclined it would take a lot for me
> to say my jeep was totaled, since insurance isn't going to pay, you are
> going to have to go by something else to drive for say $5,000.00, why not
> just put that into repairing your jeep.
>
> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> > You are not the first to roll a jeep. Jeeps are rugged, if you are
> > just using it for offroading or a fun vehicle keep it. You can find
> > tons of parts from old jeeps to replace it. Take a look at some of
> > the other jeeps that people drive on the trail, most have been beaten
> > up badly. It does not take much to fix it up for the trail and
> > replace the parts. A hammer is really cheap! I really doubt that you
> > totaled it you just add some character to it.
He can get a new 'glass body made right here in Ontario for under
$2K....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Greg wrote:
>
> Agreed, although I am not machanically inclined it would take a lot for me
> to say my jeep was totaled, since insurance isn't going to pay, you are
> going to have to go by something else to drive for say $5,000.00, why not
> just put that into repairing your jeep.
>
> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> > You are not the first to roll a jeep. Jeeps are rugged, if you are
> > just using it for offroading or a fun vehicle keep it. You can find
> > tons of parts from old jeeps to replace it. Take a look at some of
> > the other jeeps that people drive on the trail, most have been beaten
> > up badly. It does not take much to fix it up for the trail and
> > replace the parts. A hammer is really cheap! I really doubt that you
> > totaled it you just add some character to it.
11-09-2004, 01:16 PM
#23
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
I have been looking at differnt parts options online. One thing I need
to do is check the the frame did not buckle or deform at all. If it
did, then I may not take on the challenge of fixing it. If it did not,
then replcing bumpers, body panels, radiator, and roll bars may
actually be doable. I have never done any of these things before, but I
am up to the challenge and would make the comitment if it looks
reasonable. The problem is this... Are there locations, storage
garages/yards that allow you to place a vehical like this to work on
and repair yourself. I have most the tools needed to do this, just no
place to do it. The HOA would not allow the heep in my driveway, and my
garage is out of the question for the couple of months it would take to
do this work. I have been calling around, but no one seems to have any
idea where I should turn. The shops want to park it so you will pay
them to do the work. This would just cost to much. I am thinking of
putting it in a PublicStorage unit for now just to get it out of the
$25 a day tow yard location. This may be a fun challenge of rebuilding
the thing. A big commitment, but it may provide a better apprication
for the Jeep and the fact that we made it through the accident.
Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
charge. Has been rolled 270 degrees, and needs body work. It ran great
right up until it turned. Looking for best offer" :-)
Damn I miss it already. I have been wanting one for a long time, and
not even two months before this. On the way to work this morning I saw
so many Jeeps on the road, bummer. :-(
On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
> Agreed!
>
> He can get a new 'glass body made right here in Ontario for under
> $2K....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> Agreed, although I am not machanically inclined it would take a lot for me
>> to say my jeep was totaled, since insurance isn't going to pay, you are
>> going to have to go by something else to drive for say $5,000.00, why not
>> just put that into repairing your jeep.
>>
>> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
>> news:72ce17be.0411080638.55f4a32@posting.google.co m...
>>> You are not the first to roll a jeep. Jeeps are rugged, if you are
>>> just using it for offroading or a fun vehicle keep it. You can find
>>> tons of parts from old jeeps to replace it. Take a look at some of
>>> the other jeeps that people drive on the trail, most have been beaten
>>> up badly. It does not take much to fix it up for the trail and
>>> replace the parts. A hammer is really cheap! I really doubt that you
>>> totaled it you just add some character to it.
to do is check the the frame did not buckle or deform at all. If it
did, then I may not take on the challenge of fixing it. If it did not,
then replcing bumpers, body panels, radiator, and roll bars may
actually be doable. I have never done any of these things before, but I
am up to the challenge and would make the comitment if it looks
reasonable. The problem is this... Are there locations, storage
garages/yards that allow you to place a vehical like this to work on
and repair yourself. I have most the tools needed to do this, just no
place to do it. The HOA would not allow the heep in my driveway, and my
garage is out of the question for the couple of months it would take to
do this work. I have been calling around, but no one seems to have any
idea where I should turn. The shops want to park it so you will pay
them to do the work. This would just cost to much. I am thinking of
putting it in a PublicStorage unit for now just to get it out of the
$25 a day tow yard location. This may be a fun challenge of rebuilding
the thing. A big commitment, but it may provide a better apprication
for the Jeep and the fact that we made it through the accident.
Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
charge. Has been rolled 270 degrees, and needs body work. It ran great
right up until it turned. Looking for best offer" :-)
Damn I miss it already. I have been wanting one for a long time, and
not even two months before this. On the way to work this morning I saw
so many Jeeps on the road, bummer. :-(
On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
> Agreed!
>
> He can get a new 'glass body made right here in Ontario for under
> $2K....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> Agreed, although I am not machanically inclined it would take a lot for me
>> to say my jeep was totaled, since insurance isn't going to pay, you are
>> going to have to go by something else to drive for say $5,000.00, why not
>> just put that into repairing your jeep.
>>
>> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
>> news:72ce17be.0411080638.55f4a32@posting.google.co m...
>>> You are not the first to roll a jeep. Jeeps are rugged, if you are
>>> just using it for offroading or a fun vehicle keep it. You can find
>>> tons of parts from old jeeps to replace it. Take a look at some of
>>> the other jeeps that people drive on the trail, most have been beaten
>>> up badly. It does not take much to fix it up for the trail and
>>> replace the parts. A hammer is really cheap! I really doubt that you
>>> totaled it you just add some character to it.
11-09-2004, 01:16 PM
#24
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
I have been looking at differnt parts options online. One thing I need
to do is check the the frame did not buckle or deform at all. If it
did, then I may not take on the challenge of fixing it. If it did not,
then replcing bumpers, body panels, radiator, and roll bars may
actually be doable. I have never done any of these things before, but I
am up to the challenge and would make the comitment if it looks
reasonable. The problem is this... Are there locations, storage
garages/yards that allow you to place a vehical like this to work on
and repair yourself. I have most the tools needed to do this, just no
place to do it. The HOA would not allow the heep in my driveway, and my
garage is out of the question for the couple of months it would take to
do this work. I have been calling around, but no one seems to have any
idea where I should turn. The shops want to park it so you will pay
them to do the work. This would just cost to much. I am thinking of
putting it in a PublicStorage unit for now just to get it out of the
$25 a day tow yard location. This may be a fun challenge of rebuilding
the thing. A big commitment, but it may provide a better apprication
for the Jeep and the fact that we made it through the accident.
Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
charge. Has been rolled 270 degrees, and needs body work. It ran great
right up until it turned. Looking for best offer" :-)
Damn I miss it already. I have been wanting one for a long time, and
not even two months before this. On the way to work this morning I saw
so many Jeeps on the road, bummer. :-(
On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
> Agreed!
>
> He can get a new 'glass body made right here in Ontario for under
> $2K....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> Agreed, although I am not machanically inclined it would take a lot for me
>> to say my jeep was totaled, since insurance isn't going to pay, you are
>> going to have to go by something else to drive for say $5,000.00, why not
>> just put that into repairing your jeep.
>>
>> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
>> news:72ce17be.0411080638.55f4a32@posting.google.co m...
>>> You are not the first to roll a jeep. Jeeps are rugged, if you are
>>> just using it for offroading or a fun vehicle keep it. You can find
>>> tons of parts from old jeeps to replace it. Take a look at some of
>>> the other jeeps that people drive on the trail, most have been beaten
>>> up badly. It does not take much to fix it up for the trail and
>>> replace the parts. A hammer is really cheap! I really doubt that you
>>> totaled it you just add some character to it.
to do is check the the frame did not buckle or deform at all. If it
did, then I may not take on the challenge of fixing it. If it did not,
then replcing bumpers, body panels, radiator, and roll bars may
actually be doable. I have never done any of these things before, but I
am up to the challenge and would make the comitment if it looks
reasonable. The problem is this... Are there locations, storage
garages/yards that allow you to place a vehical like this to work on
and repair yourself. I have most the tools needed to do this, just no
place to do it. The HOA would not allow the heep in my driveway, and my
garage is out of the question for the couple of months it would take to
do this work. I have been calling around, but no one seems to have any
idea where I should turn. The shops want to park it so you will pay
them to do the work. This would just cost to much. I am thinking of
putting it in a PublicStorage unit for now just to get it out of the
$25 a day tow yard location. This may be a fun challenge of rebuilding
the thing. A big commitment, but it may provide a better apprication
for the Jeep and the fact that we made it through the accident.
Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
charge. Has been rolled 270 degrees, and needs body work. It ran great
right up until it turned. Looking for best offer" :-)
Damn I miss it already. I have been wanting one for a long time, and
not even two months before this. On the way to work this morning I saw
so many Jeeps on the road, bummer. :-(
On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
> Agreed!
>
> He can get a new 'glass body made right here in Ontario for under
> $2K....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> Agreed, although I am not machanically inclined it would take a lot for me
>> to say my jeep was totaled, since insurance isn't going to pay, you are
>> going to have to go by something else to drive for say $5,000.00, why not
>> just put that into repairing your jeep.
>>
>> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
>> news:72ce17be.0411080638.55f4a32@posting.google.co m...
>>> You are not the first to roll a jeep. Jeeps are rugged, if you are
>>> just using it for offroading or a fun vehicle keep it. You can find
>>> tons of parts from old jeeps to replace it. Take a look at some of
>>> the other jeeps that people drive on the trail, most have been beaten
>>> up badly. It does not take much to fix it up for the trail and
>>> replace the parts. A hammer is really cheap! I really doubt that you
>>> totaled it you just add some character to it.
11-09-2004, 01:16 PM
#25
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
I have been looking at differnt parts options online. One thing I need
to do is check the the frame did not buckle or deform at all. If it
did, then I may not take on the challenge of fixing it. If it did not,
then replcing bumpers, body panels, radiator, and roll bars may
actually be doable. I have never done any of these things before, but I
am up to the challenge and would make the comitment if it looks
reasonable. The problem is this... Are there locations, storage
garages/yards that allow you to place a vehical like this to work on
and repair yourself. I have most the tools needed to do this, just no
place to do it. The HOA would not allow the heep in my driveway, and my
garage is out of the question for the couple of months it would take to
do this work. I have been calling around, but no one seems to have any
idea where I should turn. The shops want to park it so you will pay
them to do the work. This would just cost to much. I am thinking of
putting it in a PublicStorage unit for now just to get it out of the
$25 a day tow yard location. This may be a fun challenge of rebuilding
the thing. A big commitment, but it may provide a better apprication
for the Jeep and the fact that we made it through the accident.
Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
charge. Has been rolled 270 degrees, and needs body work. It ran great
right up until it turned. Looking for best offer" :-)
Damn I miss it already. I have been wanting one for a long time, and
not even two months before this. On the way to work this morning I saw
so many Jeeps on the road, bummer. :-(
On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
> Agreed!
>
> He can get a new 'glass body made right here in Ontario for under
> $2K....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> Agreed, although I am not machanically inclined it would take a lot for me
>> to say my jeep was totaled, since insurance isn't going to pay, you are
>> going to have to go by something else to drive for say $5,000.00, why not
>> just put that into repairing your jeep.
>>
>> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
>> news:72ce17be.0411080638.55f4a32@posting.google.co m...
>>> You are not the first to roll a jeep. Jeeps are rugged, if you are
>>> just using it for offroading or a fun vehicle keep it. You can find
>>> tons of parts from old jeeps to replace it. Take a look at some of
>>> the other jeeps that people drive on the trail, most have been beaten
>>> up badly. It does not take much to fix it up for the trail and
>>> replace the parts. A hammer is really cheap! I really doubt that you
>>> totaled it you just add some character to it.
to do is check the the frame did not buckle or deform at all. If it
did, then I may not take on the challenge of fixing it. If it did not,
then replcing bumpers, body panels, radiator, and roll bars may
actually be doable. I have never done any of these things before, but I
am up to the challenge and would make the comitment if it looks
reasonable. The problem is this... Are there locations, storage
garages/yards that allow you to place a vehical like this to work on
and repair yourself. I have most the tools needed to do this, just no
place to do it. The HOA would not allow the heep in my driveway, and my
garage is out of the question for the couple of months it would take to
do this work. I have been calling around, but no one seems to have any
idea where I should turn. The shops want to park it so you will pay
them to do the work. This would just cost to much. I am thinking of
putting it in a PublicStorage unit for now just to get it out of the
$25 a day tow yard location. This may be a fun challenge of rebuilding
the thing. A big commitment, but it may provide a better apprication
for the Jeep and the fact that we made it through the accident.
Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
charge. Has been rolled 270 degrees, and needs body work. It ran great
right up until it turned. Looking for best offer" :-)
Damn I miss it already. I have been wanting one for a long time, and
not even two months before this. On the way to work this morning I saw
so many Jeeps on the road, bummer. :-(
On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
> Agreed!
>
> He can get a new 'glass body made right here in Ontario for under
> $2K....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Greg wrote:
>>
>> Agreed, although I am not machanically inclined it would take a lot for me
>> to say my jeep was totaled, since insurance isn't going to pay, you are
>> going to have to go by something else to drive for say $5,000.00, why not
>> just put that into repairing your jeep.
>>
>> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
>> news:72ce17be.0411080638.55f4a32@posting.google.co m...
>>> You are not the first to roll a jeep. Jeeps are rugged, if you are
>>> just using it for offroading or a fun vehicle keep it. You can find
>>> tons of parts from old jeeps to replace it. Take a look at some of
>>> the other jeeps that people drive on the trail, most have been beaten
>>> up badly. It does not take much to fix it up for the trail and
>>> replace the parts. A hammer is really cheap! I really doubt that you
>>> totaled it you just add some character to it.
11-09-2004, 02:23 PM
#26
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
i know your feeling, mine is not starting for a week now , and i miss it a
lot, I was thinking about selling it recently.
But NO WAY I WILL KEEP IT, if it can start...
keep it if you can and have time to fix it.
JEEP, THERE'S ONLY ONE
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
SANS FRAIS 1 888 643 0511
patrick@leclone.com
www.leclone.com
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
lot, I was thinking about selling it recently.
But NO WAY I WILL KEEP IT, if it can start...
keep it if you can and have time to fix it.
JEEP, THERE'S ONLY ONE
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
SANS FRAIS 1 888 643 0511
patrick@leclone.com
www.leclone.com
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
11-09-2004, 02:23 PM
#27
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
i know your feeling, mine is not starting for a week now , and i miss it a
lot, I was thinking about selling it recently.
But NO WAY I WILL KEEP IT, if it can start...
keep it if you can and have time to fix it.
JEEP, THERE'S ONLY ONE
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
SANS FRAIS 1 888 643 0511
patrick@leclone.com
www.leclone.com
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
lot, I was thinking about selling it recently.
But NO WAY I WILL KEEP IT, if it can start...
keep it if you can and have time to fix it.
JEEP, THERE'S ONLY ONE
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
SANS FRAIS 1 888 643 0511
patrick@leclone.com
www.leclone.com
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
11-09-2004, 02:23 PM
#28
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
i know your feeling, mine is not starting for a week now , and i miss it a
lot, I was thinking about selling it recently.
But NO WAY I WILL KEEP IT, if it can start...
keep it if you can and have time to fix it.
JEEP, THERE'S ONLY ONE
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
SANS FRAIS 1 888 643 0511
patrick@leclone.com
www.leclone.com
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
lot, I was thinking about selling it recently.
But NO WAY I WILL KEEP IT, if it can start...
keep it if you can and have time to fix it.
JEEP, THERE'S ONLY ONE
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
SANS FRAIS 1 888 643 0511
patrick@leclone.com
www.leclone.com
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
11-09-2004, 04:18 PM
#29
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
I ran into the same problem when I went to by an '89 YJ for parts awhile
back. Best bet is to place an ad in papers in the area asking if anyone
would rent out a garage for cheap. You'd be surprised how many elderly
people don't mind as long as the noise, especially after 8pm, isn't too
crazy. You usually work out some kind of deal where they are allotted their
naptime, etc, and you can do whatever you want in their garage in between.
My neighbour did this because he has no use for his garage and the neighbour
beside him on the other side rents his garage for storage of his lawn tools
(in return for maintaining his yard). A guy by my buddy's frat house also
rents his garage to home-mechanics for exactly this purpose ...altho he
charges a bit more cuz he has all the tools in there already.
Good luck!
--
griffin
'85 Jeep CJ-7
'97 Toyota Corolla SD
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
back. Best bet is to place an ad in papers in the area asking if anyone
would rent out a garage for cheap. You'd be surprised how many elderly
people don't mind as long as the noise, especially after 8pm, isn't too
crazy. You usually work out some kind of deal where they are allotted their
naptime, etc, and you can do whatever you want in their garage in between.
My neighbour did this because he has no use for his garage and the neighbour
beside him on the other side rents his garage for storage of his lawn tools
(in return for maintaining his yard). A guy by my buddy's frat house also
rents his garage to home-mechanics for exactly this purpose ...altho he
charges a bit more cuz he has all the tools in there already.
Good luck!
--
griffin
'85 Jeep CJ-7
'97 Toyota Corolla SD
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
11-09-2004, 04:18 PM
#30
Guest
Posts: n/a
Re: 91 YJ - rolled it... totaled it
I ran into the same problem when I went to by an '89 YJ for parts awhile
back. Best bet is to place an ad in papers in the area asking if anyone
would rent out a garage for cheap. You'd be surprised how many elderly
people don't mind as long as the noise, especially after 8pm, isn't too
crazy. You usually work out some kind of deal where they are allotted their
naptime, etc, and you can do whatever you want in their garage in between.
My neighbour did this because he has no use for his garage and the neighbour
beside him on the other side rents his garage for storage of his lawn tools
(in return for maintaining his yard). A guy by my buddy's frat house also
rents his garage to home-mechanics for exactly this purpose ...altho he
charges a bit more cuz he has all the tools in there already.
Good luck!
--
griffin
'85 Jeep CJ-7
'97 Toyota Corolla SD
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
back. Best bet is to place an ad in papers in the area asking if anyone
would rent out a garage for cheap. You'd be surprised how many elderly
people don't mind as long as the noise, especially after 8pm, isn't too
crazy. You usually work out some kind of deal where they are allotted their
naptime, etc, and you can do whatever you want in their garage in between.
My neighbour did this because he has no use for his garage and the neighbour
beside him on the other side rents his garage for storage of his lawn tools
(in return for maintaining his yard). A guy by my buddy's frat house also
rents his garage to home-mechanics for exactly this purpose ...altho he
charges a bit more cuz he has all the tools in there already.
Good luck!
--
griffin
'85 Jeep CJ-7
'97 Toyota Corolla SD
"Chris" <chris-at-borngraphics.com> wrote in message
news:2004110910162316807%chrisatborngraphicscom@ca llhome.homeip.net...
> I have been looking at differnt parts options online. One thing I need
> to do is check the the frame did not buckle or deform at all. If it
> did, then I may not take on the challenge of fixing it. If it did not,
> then replcing bumpers, body panels, radiator, and roll bars may
> actually be doable. I have never done any of these things before, but I
> am up to the challenge and would make the comitment if it looks
> reasonable. The problem is this... Are there locations, storage
> garages/yards that allow you to place a vehical like this to work on
> and repair yourself. I have most the tools needed to do this, just no
> place to do it. The HOA would not allow the heep in my driveway, and my
> garage is out of the question for the couple of months it would take to
> do this work. I have been calling around, but no one seems to have any
> idea where I should turn. The shops want to park it so you will pay
> them to do the work. This would just cost to much. I am thinking of
> putting it in a PublicStorage unit for now just to get it out of the
> $25 a day tow yard location. This may be a fun challenge of rebuilding
> the thing. A big commitment, but it may provide a better apprication
> for the Jeep and the fact that we made it through the accident.
> Otherwise "1991 Jeep YJ For Sale. Will tow to So. Cal. location at no
> charge. Has been rolled 270 degrees, and needs body work. It ran great
> right up until it turned. Looking for best offer" :-)
>
> Damn I miss it already. I have been wanting one for a long time, and
> not even two months before this. On the way to work this morning I saw
> so many Jeeps on the road, bummer. :-(
>
>
>
>
> On 2004-11-09 08:20:31 -0800, Mike Romain <romainm@sympatico.ca> said:
>
> > Agreed!
> >
> > He can get a new 'glass body made right here in Ontario for under
> > $2K....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Greg wrote:
> >>
> >> Agreed, although I am not machanically inclined it would take a lot for
me
> >> to say my jeep was totaled, since insurance isn't going to pay, you are
> >> going to have to go by something else to drive for say $5,000.00, why
not
> >> just put that into repairing your jeep.
> >>
> >> "Snowboardripper" <snowboardripper@hotmail.com> wrote in message
> >> news:72ce17be.0411080638.55f4a32@posting.google.co m...
> >>> You are not the first to roll a jeep. Jeeps are rugged, if you are
> >>> just using it for offroading or a fun vehicle keep it. You can find
> >>> tons of parts from old jeeps to replace it. Take a look at some of
> >>> the other jeeps that people drive on the trail, most have been beaten
> >>> up badly. It does not take much to fix it up for the trail and
> >>> replace the parts. A hammer is really cheap! I really doubt that you
> >>> totaled it you just add some character to it.
>
>
