91 YJ JEEP SOFT TOP Help!!!!
Guest
Posts: n/a
91 YJ JEEP SOFT TOP Help!!!!
I have a bestop soft top with their hardware.The frame hardware that
folds up is in not good shape its held to gather with duck tape.The
top is in good shape.I need to know if I have to have bestop frame
work are can I use factory frame hardware.This is my first jeep and
any help would be great Thanks!!!
folds up is in not good shape its held to gather with duck tape.The
top is in good shape.I need to know if I have to have bestop frame
work are can I use factory frame hardware.This is my first jeep and
any help would be great Thanks!!!
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
"BRIAN" <BKF9865@AOL.COM> wrote in message
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
"BRIAN" <BKF9865@AOL.COM> wrote in message
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
"BRIAN" <BKF9865@AOL.COM> wrote in message
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
"BRIAN" <BKF9865@AOL.COM> wrote in message
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
> I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
There are several different things that you could actually have here. The
two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
hardware, if you actually have a Bestop soft top cover. The answers are
different for each one. Are the top rear corners of the doors angled, or
are they rounded with about a four inch radius?
Earle
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
On May 10, 11:49 am, "Earle Horton" <e...@angloburgues.usa> wrote:
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
On May 10, 11:49 am, "Earle Horton" <e...@angloburgues.usa> wrote:
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
On May 10, 11:49 am, "Earle Horton" <e...@angloburgues.usa> wrote:
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
On May 10, 11:49 am, "Earle Horton" <e...@angloburgues.usa> wrote:
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
> "BRIAN" <BKF9...@AOL.COM> wrote in message
>
> news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...> I have a bestop soft top with their hardware.The frame hardware that
> > folds up is in not good shape its held to gather with duck tape.The
> > top is in good shape.I need to know if I have to have bestop frame
> > work are can I use factory frame hardware.This is my first jeep and
> > any help would be great Thanks!!!
>
> There are several different things that you could actually have here. The
> two most likely are Bestop Supertop and Bestop Replace-a-Top on factory
> hardware, if you actually have a Bestop soft top cover. The answers are
> different for each one. Are the top rear corners of the doors angled, or
> are they rounded with about a four inch radius?
>
> Earle
They are rounded.From looking at bestop page i have there
hardware.thanks for the help!!
Guest
Posts: n/a
Re: 91 YJ JEEP SOFT TOP Help!!!!
Brian,
Here is a link to a page http://www.xtremeterrain.com/oemframes.htm that
shows the frames of the OEM soft tops which is the same as the Bestop
Replace-A-Top frames. If your frame looks like this then you have the
Replace-A-Top soft top from Bestop and you can use the hardware from a
factory soft top. If your frame doesn;t look like this then you more than
likely have a Bestop SuperTop and I do not belive that they sell the
hardware seperate. You'll need to find it on the used market or buy a whloe
new soft top with hardware.
If you need to get your hands on hardware for the factory/Replace-A-Top,
there are places on the web that sell the hardware only for the soft tops
now.
Nat Man
--
"BRIAN" <BKF9865@AOL.COM> wrote in message
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
>I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
Here is a link to a page http://www.xtremeterrain.com/oemframes.htm that
shows the frames of the OEM soft tops which is the same as the Bestop
Replace-A-Top frames. If your frame looks like this then you have the
Replace-A-Top soft top from Bestop and you can use the hardware from a
factory soft top. If your frame doesn;t look like this then you more than
likely have a Bestop SuperTop and I do not belive that they sell the
hardware seperate. You'll need to find it on the used market or buy a whloe
new soft top with hardware.
If you need to get your hands on hardware for the factory/Replace-A-Top,
there are places on the web that sell the hardware only for the soft tops
now.
Nat Man
--
"BRIAN" <BKF9865@AOL.COM> wrote in message
news:1178810721.910566.147200@y80g2000hsf.googlegr oups.com...
>I have a bestop soft top with their hardware.The frame hardware that
> folds up is in not good shape its held to gather with duck tape.The
> top is in good shape.I need to know if I have to have bestop frame
> work are can I use factory frame hardware.This is my first jeep and
> any help would be great Thanks!!!
>
