'91' XJ: R&R rear bumper
Guest
Posts: n/a
Re: '91' XJ: R&R rear bumper
Yea. Its super easy unless you have the factory hitch. then it becomes just
kinda easy.
KH
"Steve" <steve@xjeep.dyndns.org> wrote in message
news:DCgre.46197$Ph4.1159219@ursa-nb00s0.nbnet.nb.ca...
> Very simple bolt on replacement. Be sure the donor is '84-'96. Should be
> plentiful in the junkyards, but may be cheaper or even free if you ask
> around your local Jeep club for someone who just upgraded.
>
> Steve
> http://xjeep.dyndns.org
>
> Bill L wrote:
>> Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
>> The bumper has a nice crease in it where I backed into a parking pole
>> that was in my blind spot AND below the window height of the rear
>> liftgate window. I'm hoping to hit up a junkyard and get a matching
>> bumper. Thanks in advance.
kinda easy.
KH
"Steve" <steve@xjeep.dyndns.org> wrote in message
news:DCgre.46197$Ph4.1159219@ursa-nb00s0.nbnet.nb.ca...
> Very simple bolt on replacement. Be sure the donor is '84-'96. Should be
> plentiful in the junkyards, but may be cheaper or even free if you ask
> around your local Jeep club for someone who just upgraded.
>
> Steve
> http://xjeep.dyndns.org
>
> Bill L wrote:
>> Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
>> The bumper has a nice crease in it where I backed into a parking pole
>> that was in my blind spot AND below the window height of the rear
>> liftgate window. I'm hoping to hit up a junkyard and get a matching
>> bumper. Thanks in advance.
Guest
Posts: n/a
Re: '91' XJ: R&R rear bumper
Yea. Its super easy unless you have the factory hitch. then it becomes just
kinda easy.
KH
"Steve" <steve@xjeep.dyndns.org> wrote in message
news:DCgre.46197$Ph4.1159219@ursa-nb00s0.nbnet.nb.ca...
> Very simple bolt on replacement. Be sure the donor is '84-'96. Should be
> plentiful in the junkyards, but may be cheaper or even free if you ask
> around your local Jeep club for someone who just upgraded.
>
> Steve
> http://xjeep.dyndns.org
>
> Bill L wrote:
>> Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
>> The bumper has a nice crease in it where I backed into a parking pole
>> that was in my blind spot AND below the window height of the rear
>> liftgate window. I'm hoping to hit up a junkyard and get a matching
>> bumper. Thanks in advance.
kinda easy.
KH
"Steve" <steve@xjeep.dyndns.org> wrote in message
news:DCgre.46197$Ph4.1159219@ursa-nb00s0.nbnet.nb.ca...
> Very simple bolt on replacement. Be sure the donor is '84-'96. Should be
> plentiful in the junkyards, but may be cheaper or even free if you ask
> around your local Jeep club for someone who just upgraded.
>
> Steve
> http://xjeep.dyndns.org
>
> Bill L wrote:
>> Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
>> The bumper has a nice crease in it where I backed into a parking pole
>> that was in my blind spot AND below the window height of the rear
>> liftgate window. I'm hoping to hit up a junkyard and get a matching
>> bumper. Thanks in advance.
Guest
Posts: n/a
Re: '91' XJ: R&R rear bumper
Yea. Its super easy unless you have the factory hitch. then it becomes just
kinda easy.
KH
"Steve" <steve@xjeep.dyndns.org> wrote in message
news:DCgre.46197$Ph4.1159219@ursa-nb00s0.nbnet.nb.ca...
> Very simple bolt on replacement. Be sure the donor is '84-'96. Should be
> plentiful in the junkyards, but may be cheaper or even free if you ask
> around your local Jeep club for someone who just upgraded.
>
> Steve
> http://xjeep.dyndns.org
>
> Bill L wrote:
>> Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
>> The bumper has a nice crease in it where I backed into a parking pole
>> that was in my blind spot AND below the window height of the rear
>> liftgate window. I'm hoping to hit up a junkyard and get a matching
>> bumper. Thanks in advance.
kinda easy.
KH
"Steve" <steve@xjeep.dyndns.org> wrote in message
news:DCgre.46197$Ph4.1159219@ursa-nb00s0.nbnet.nb.ca...
> Very simple bolt on replacement. Be sure the donor is '84-'96. Should be
> plentiful in the junkyards, but may be cheaper or even free if you ask
> around your local Jeep club for someone who just upgraded.
>
> Steve
> http://xjeep.dyndns.org
>
> Bill L wrote:
>> Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
>> The bumper has a nice crease in it where I backed into a parking pole
>> that was in my blind spot AND below the window height of the rear
>> liftgate window. I'm hoping to hit up a junkyard and get a matching
>> bumper. Thanks in advance.
Guest
Posts: n/a
Re: '91' XJ: R&R rear bumper
remove the end caps then there is 4 15mm bolts on each frame rail to bracket mount that has to be removed
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Guest
Posts: n/a
Re: '91' XJ: R&R rear bumper
remove the end caps then there is 4 15mm bolts on each frame rail to bracket mount that has to be removed
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Guest
Posts: n/a
Re: '91' XJ: R&R rear bumper
remove the end caps then there is 4 15mm bolts on each frame rail to bracket mount that has to be removed
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Guest
Posts: n/a
Re: '91' XJ: R&R rear bumper
remove the end caps then there is 4 15mm bolts on each frame rail to bracket mount that has to be removed
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Stephen Cowell wrote:
> "Bill L" <nowhere@anywhere.com> wrote in message news:GT0re.27277$J12.2934@newssvr14.news.prodigy.c om...
> > Anyone got any gotchas or advice on R&R'ing the rear bumper on a '91' XJ?
> > The bumper has a nice crease in it where I backed into a parking pole that
> > was in my blind spot AND below the window height of the rear liftgate
> > window. I'm hoping to hit up a junkyard and get a matching bumper. Thanks in
> > advance.
>
> I have both Haynes and Chilton's for your year... the
> Chilton's doesn't even mention it, and the Haynes
> glosses over it pretty quickly. Should be obvious.
> __
> Steve
> .
Thread
Thread Starter
Forum
Replies
Last Post
MUDEATER
Jeep & 4x4 Items For Sale
2
Aug 11, 2015 07:30 PM
Morris4x4Center
Morris 4x4 Center
0
Apr 21, 2015 08:57 AM
Harry Palmer
Jeep Mailing List
36
Feb 1, 2007 09:19 AM
Dave
Jeep Mailing List
0
May 26, 2006 08:51 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)