89 cherokee 4wd engage/disengage problem
10-15-2005, 11:55 PM
#1
Guest
Posts: n/a
89 cherokee 4wd engage/disengage problem
okay I am stuck. I have been told that there is supposed to be a vacuum
line running to the front axle differential to engage the front axle to
4wd. I am as green as they come when it comes to this vehicle. I cannot
find a vacuum line running to the unit. If there is a vacuum line running
to it, where does it originate from; maybe I could track it back that way,
line running to the front axle differential to engage the front axle to
4wd. I am as green as they come when it comes to this vehicle. I cannot
find a vacuum line running to the unit. If there is a vacuum line running
to it, where does it originate from; maybe I could track it back that way,
10-16-2005, 02:00 AM
#2
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
You may not have a vacuum disconnect on your axle. Mine doesnt. If there is
no box on the axle tube with lines two lines going to it then you are lucky
and have a non vacuum disconnect front axle.
If its not shifting, start with the simplest things, check your tire
pressure and make sure they are the same left and right sides, it is very
common for the shift linkage to slip a bit and need adjusting. the shift
linkage adjusts right underneath the jeep where the handle pulls on a rod
that connects to your transfer case.
KH
for tons of other cherokee owners opinions and more info than anyone could
ever want about the cherokee try.
www.naxja.org
"scmadhatter" <scmattern@***.net> wrote in message
news:f05c3123f832d046ad42be4faa1bdf78@localhost.ta lkaboutautos.com...
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
>
no box on the axle tube with lines two lines going to it then you are lucky
and have a non vacuum disconnect front axle.
If its not shifting, start with the simplest things, check your tire
pressure and make sure they are the same left and right sides, it is very
common for the shift linkage to slip a bit and need adjusting. the shift
linkage adjusts right underneath the jeep where the handle pulls on a rod
that connects to your transfer case.
KH
for tons of other cherokee owners opinions and more info than anyone could
ever want about the cherokee try.
www.naxja.org
"scmadhatter" <scmattern@***.net> wrote in message
news:f05c3123f832d046ad42be4faa1bdf78@localhost.ta lkaboutautos.com...
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
>
10-16-2005, 02:00 AM
#3
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
You may not have a vacuum disconnect on your axle. Mine doesnt. If there is
no box on the axle tube with lines two lines going to it then you are lucky
and have a non vacuum disconnect front axle.
If its not shifting, start with the simplest things, check your tire
pressure and make sure they are the same left and right sides, it is very
common for the shift linkage to slip a bit and need adjusting. the shift
linkage adjusts right underneath the jeep where the handle pulls on a rod
that connects to your transfer case.
KH
for tons of other cherokee owners opinions and more info than anyone could
ever want about the cherokee try.
www.naxja.org
"scmadhatter" <scmattern@***.net> wrote in message
news:f05c3123f832d046ad42be4faa1bdf78@localhost.ta lkaboutautos.com...
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
>
no box on the axle tube with lines two lines going to it then you are lucky
and have a non vacuum disconnect front axle.
If its not shifting, start with the simplest things, check your tire
pressure and make sure they are the same left and right sides, it is very
common for the shift linkage to slip a bit and need adjusting. the shift
linkage adjusts right underneath the jeep where the handle pulls on a rod
that connects to your transfer case.
KH
for tons of other cherokee owners opinions and more info than anyone could
ever want about the cherokee try.
www.naxja.org
"scmadhatter" <scmattern@***.net> wrote in message
news:f05c3123f832d046ad42be4faa1bdf78@localhost.ta lkaboutautos.com...
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
>
10-16-2005, 02:00 AM
#4
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
You may not have a vacuum disconnect on your axle. Mine doesnt. If there is
no box on the axle tube with lines two lines going to it then you are lucky
and have a non vacuum disconnect front axle.
If its not shifting, start with the simplest things, check your tire
pressure and make sure they are the same left and right sides, it is very
common for the shift linkage to slip a bit and need adjusting. the shift
linkage adjusts right underneath the jeep where the handle pulls on a rod
that connects to your transfer case.
KH
for tons of other cherokee owners opinions and more info than anyone could
ever want about the cherokee try.
www.naxja.org
"scmadhatter" <scmattern@***.net> wrote in message
news:f05c3123f832d046ad42be4faa1bdf78@localhost.ta lkaboutautos.com...
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
>
no box on the axle tube with lines two lines going to it then you are lucky
and have a non vacuum disconnect front axle.
If its not shifting, start with the simplest things, check your tire
pressure and make sure they are the same left and right sides, it is very
common for the shift linkage to slip a bit and need adjusting. the shift
linkage adjusts right underneath the jeep where the handle pulls on a rod
that connects to your transfer case.
KH
for tons of other cherokee owners opinions and more info than anyone could
ever want about the cherokee try.
www.naxja.org
"scmadhatter" <scmattern@***.net> wrote in message
news:f05c3123f832d046ad42be4faa1bdf78@localhost.ta lkaboutautos.com...
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
>
10-16-2005, 10:56 AM
#5
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
on the passenger side of the axle tube on the back side.
Are you having an issue shifting into 4x4?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
scmadhatter wrote:
>
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
on the passenger side of the axle tube on the back side.
Are you having an issue shifting into 4x4?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
scmadhatter wrote:
>
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
10-16-2005, 10:56 AM
#6
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
on the passenger side of the axle tube on the back side.
Are you having an issue shifting into 4x4?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
scmadhatter wrote:
>
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
on the passenger side of the axle tube on the back side.
Are you having an issue shifting into 4x4?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
scmadhatter wrote:
>
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
10-16-2005, 10:56 AM
#7
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
on the passenger side of the axle tube on the back side.
Are you having an issue shifting into 4x4?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
scmadhatter wrote:
>
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
on the passenger side of the axle tube on the back side.
Are you having an issue shifting into 4x4?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
scmadhatter wrote:
>
> okay I am stuck. I have been told that there is supposed to be a vacuum
> line running to the front axle differential to engage the front axle to
> 4wd. I am as green as they come when it comes to this vehicle. I cannot
> find a vacuum line running to the unit. If there is a vacuum line running
> to it, where does it originate from; maybe I could track it back that way,
10-16-2005, 04:02 PM
#8
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
Mike, not all 89's have a vacuum axle disconnect. My 88 is a non disconnect.
Hey Mike, how have you been, are you any better? I havent been around here
in a while.
KH
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43526A17.AE9F6BAA@sympatico.ca...
> An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
> on the passenger side of the axle tube on the back side.
>
> Are you having an issue shifting into 4x4?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> scmadhatter wrote:
>>
>> okay I am stuck. I have been told that there is supposed to be a vacuum
>> line running to the front axle differential to engage the front axle to
>> 4wd. I am as green as they come when it comes to this vehicle. I cannot
>> find a vacuum line running to the unit. If there is a vacuum line
>> running
>> to it, where does it originate from; maybe I could track it back that
>> way,
Hey Mike, how have you been, are you any better? I havent been around here
in a while.
KH
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43526A17.AE9F6BAA@sympatico.ca...
> An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
> on the passenger side of the axle tube on the back side.
>
> Are you having an issue shifting into 4x4?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> scmadhatter wrote:
>>
>> okay I am stuck. I have been told that there is supposed to be a vacuum
>> line running to the front axle differential to engage the front axle to
>> 4wd. I am as green as they come when it comes to this vehicle. I cannot
>> find a vacuum line running to the unit. If there is a vacuum line
>> running
>> to it, where does it originate from; maybe I could track it back that
>> way,
10-16-2005, 04:02 PM
#9
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
Mike, not all 89's have a vacuum axle disconnect. My 88 is a non disconnect.
Hey Mike, how have you been, are you any better? I havent been around here
in a while.
KH
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43526A17.AE9F6BAA@sympatico.ca...
> An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
> on the passenger side of the axle tube on the back side.
>
> Are you having an issue shifting into 4x4?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> scmadhatter wrote:
>>
>> okay I am stuck. I have been told that there is supposed to be a vacuum
>> line running to the front axle differential to engage the front axle to
>> 4wd. I am as green as they come when it comes to this vehicle. I cannot
>> find a vacuum line running to the unit. If there is a vacuum line
>> running
>> to it, where does it originate from; maybe I could track it back that
>> way,
Hey Mike, how have you been, are you any better? I havent been around here
in a while.
KH
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43526A17.AE9F6BAA@sympatico.ca...
> An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
> on the passenger side of the axle tube on the back side.
>
> Are you having an issue shifting into 4x4?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> scmadhatter wrote:
>>
>> okay I am stuck. I have been told that there is supposed to be a vacuum
>> line running to the front axle differential to engage the front axle to
>> 4wd. I am as green as they come when it comes to this vehicle. I cannot
>> find a vacuum line running to the unit. If there is a vacuum line
>> running
>> to it, where does it originate from; maybe I could track it back that
>> way,
10-16-2005, 04:02 PM
#10
Guest
Posts: n/a
Re: 89 cherokee 4wd engage/disengage problem
Mike, not all 89's have a vacuum axle disconnect. My 88 is a non disconnect.
Hey Mike, how have you been, are you any better? I havent been around here
in a while.
KH
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43526A17.AE9F6BAA@sympatico.ca...
> An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
> on the passenger side of the axle tube on the back side.
>
> Are you having an issue shifting into 4x4?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> scmadhatter wrote:
>>
>> okay I am stuck. I have been told that there is supposed to be a vacuum
>> line running to the front axle differential to engage the front axle to
>> 4wd. I am as green as they come when it comes to this vehicle. I cannot
>> find a vacuum line running to the unit. If there is a vacuum line
>> running
>> to it, where does it originate from; maybe I could track it back that
>> way,
Hey Mike, how have you been, are you any better? I havent been around here
in a while.
KH
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:43526A17.AE9F6BAA@sympatico.ca...
> An 89 is supposed to be a vacuum style axle lock. The vacuum switch is
> on the passenger side of the axle tube on the back side.
>
> Are you having an issue shifting into 4x4?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> scmadhatter wrote:
>>
>> okay I am stuck. I have been told that there is supposed to be a vacuum
>> line running to the front axle differential to engage the front axle to
>> 4wd. I am as green as they come when it comes to this vehicle. I cannot
>> find a vacuum line running to the unit. If there is a vacuum line
>> running
>> to it, where does it originate from; maybe I could track it back that
>> way,