'88 YJ sputtering question
#1
Guest
Posts: n/a
'88 YJ sputtering question
I have a '88 YJ with the 4.2 liter inline 6. The engine does have
quite a few miles on it but seems to do alright. The question I have
is why would it hesitate and sputter at low rpm's when I load the
engine? For example, when starting out from a stop? The Carter BBD I
rebuilt not long ago and now I just put a Motorcraft 2100 on and I
still have the same problem? Also, with both carburetors I can't seem
to get the idle rpms down from about 1000. What should I look at? I
have adjusted the idle screws and the mixture screws. In fact, the
idle screw isn't even touching now to get it down to 1000. Any help
would be appreciated.
quite a few miles on it but seems to do alright. The question I have
is why would it hesitate and sputter at low rpm's when I load the
engine? For example, when starting out from a stop? The Carter BBD I
rebuilt not long ago and now I just put a Motorcraft 2100 on and I
still have the same problem? Also, with both carburetors I can't seem
to get the idle rpms down from about 1000. What should I look at? I
have adjusted the idle screws and the mixture screws. In fact, the
idle screw isn't even touching now to get it down to 1000. Any help
would be appreciated.
#2
Guest
Posts: n/a
Re: '88 YJ sputtering question
Have you checked everywhere for air leaks or a missing/cracked/broken hose?
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
#3
Guest
Posts: n/a
Re: '88 YJ sputtering question
Have you checked everywhere for air leaks or a missing/cracked/broken hose?
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
#4
Guest
Posts: n/a
Re: '88 YJ sputtering question
Have you checked everywhere for air leaks or a missing/cracked/broken hose?
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
#5
Guest
Posts: n/a
Re: '88 YJ sputtering question
Have you checked everywhere for air leaks or a missing/cracked/broken hose?
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
--
..
Billy_Ray@SPAM.fuse.net (remove SPAM)
2002 Jeep WJ 4 Liter Automatic
Brilliant Black Crystal Pearl Coat
Sharing is why we are all here....... or should be.
..
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
#6
Guest
Posts: n/a
Re: '88 YJ sputtering question
Sounds like vaccuum leak
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
#7
Guest
Posts: n/a
Re: '88 YJ sputtering question
Sounds like vaccuum leak
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
#8
Guest
Posts: n/a
Re: '88 YJ sputtering question
Sounds like vaccuum leak
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
#9
Guest
Posts: n/a
Re: '88 YJ sputtering question
Sounds like vaccuum leak
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>
"rjmax" <rjmax_72@hotmail.com> wrote in message
news:1124977239.979754.67720@z14g2000cwz.googlegro ups.com...
>I have a '88 YJ with the 4.2 liter inline 6. The engine does have
> quite a few miles on it but seems to do alright. The question I have
> is why would it hesitate and sputter at low rpm's when I load the
> engine? For example, when starting out from a stop? The Carter BBD I
> rebuilt not long ago and now I just put a Motorcraft 2100 on and I
> still have the same problem? Also, with both carburetors I can't seem
> to get the idle rpms down from about 1000. What should I look at? I
> have adjusted the idle screws and the mixture screws. In fact, the
> idle screw isn't even touching now to get it down to 1000. Any help
> would be appreciated.
>