86 cherokee
#2
Guest
Posts: n/a
Re: 86 cherokee
hoop9 did pass the time by typing:
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW
#3
Guest
Posts: n/a
Re: 86 cherokee
hoop9 did pass the time by typing:
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW
#4
Guest
Posts: n/a
Re: 86 cherokee
hoop9 did pass the time by typing:
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW
#5
Guest
Posts: n/a
Re: 86 cherokee
hoop9 did pass the time by typing:
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW
> relaced ecm 4times.keeps burning in same spot on board.Runs lean/ruff
> idle.no code present!
> please help!
If the ecm is burning then there is a wiring fault in the harness.
Get a schematic for your jeep and start ohming out all the wires
till you find the one that is shorted out. Odds are it's a voltage
supply wire to one of the sensors.
--
DougW