8274 Solinoid Replacement
#11
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
Huh? I don't follow you bill.
Daren
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F34C94.AC5FD02F@***.net...
> If you are asking whether to replace solenoids that will not work
> connect your batter with your winch, with new ones, that look like
> Ford's, than I vote yes.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> City Jeep wrote:
> >
> > I just replaced the solenoids on my 8274 with new ones from Advanced. I
> > used a round Ford type. They match the ones that came off exactly.....I
> > thought. Now I'm questioning if they will stand up. If I take the cable
all
> > the way out and then pull it all in, it's fine until I stop and attempt
to
> > restart. When that happens the solenoids "click" but do not actually
"pull
> > in". By this I mean I hear an audible click, but measured with a fluke
> > meter no voltage passes. If I let the solenoids sit for about 30
seconds I
> > can then complete the cable take up.
> >
> > I've checked and thoroughly cleaned all connections from the solenoid
pack
> > to the battery.
> >
> > Any suggestions?
Daren
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F34C94.AC5FD02F@***.net...
> If you are asking whether to replace solenoids that will not work
> connect your batter with your winch, with new ones, that look like
> Ford's, than I vote yes.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> City Jeep wrote:
> >
> > I just replaced the solenoids on my 8274 with new ones from Advanced. I
> > used a round Ford type. They match the ones that came off exactly.....I
> > thought. Now I'm questioning if they will stand up. If I take the cable
all
> > the way out and then pull it all in, it's fine until I stop and attempt
to
> > restart. When that happens the solenoids "click" but do not actually
"pull
> > in". By this I mean I hear an audible click, but measured with a fluke
> > meter no voltage passes. If I let the solenoids sit for about 30
seconds I
> > can then complete the cable take up.
> >
> > I've checked and thoroughly cleaned all connections from the solenoid
pack
> > to the battery.
> >
> > Any suggestions?
#12
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
Huh? I don't follow you bill.
Daren
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F34C94.AC5FD02F@***.net...
> If you are asking whether to replace solenoids that will not work
> connect your batter with your winch, with new ones, that look like
> Ford's, than I vote yes.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> City Jeep wrote:
> >
> > I just replaced the solenoids on my 8274 with new ones from Advanced. I
> > used a round Ford type. They match the ones that came off exactly.....I
> > thought. Now I'm questioning if they will stand up. If I take the cable
all
> > the way out and then pull it all in, it's fine until I stop and attempt
to
> > restart. When that happens the solenoids "click" but do not actually
"pull
> > in". By this I mean I hear an audible click, but measured with a fluke
> > meter no voltage passes. If I let the solenoids sit for about 30
seconds I
> > can then complete the cable take up.
> >
> > I've checked and thoroughly cleaned all connections from the solenoid
pack
> > to the battery.
> >
> > Any suggestions?
Daren
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F34C94.AC5FD02F@***.net...
> If you are asking whether to replace solenoids that will not work
> connect your batter with your winch, with new ones, that look like
> Ford's, than I vote yes.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> City Jeep wrote:
> >
> > I just replaced the solenoids on my 8274 with new ones from Advanced. I
> > used a round Ford type. They match the ones that came off exactly.....I
> > thought. Now I'm questioning if they will stand up. If I take the cable
all
> > the way out and then pull it all in, it's fine until I stop and attempt
to
> > restart. When that happens the solenoids "click" but do not actually
"pull
> > in". By this I mean I hear an audible click, but measured with a fluke
> > meter no voltage passes. If I let the solenoids sit for about 30
seconds I
> > can then complete the cable take up.
> >
> > I've checked and thoroughly cleaned all connections from the solenoid
pack
> > to the battery.
> >
> > Any suggestions?
#13
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
Huh? I don't follow you bill.
Daren
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F34C94.AC5FD02F@***.net...
> If you are asking whether to replace solenoids that will not work
> connect your batter with your winch, with new ones, that look like
> Ford's, than I vote yes.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> City Jeep wrote:
> >
> > I just replaced the solenoids on my 8274 with new ones from Advanced. I
> > used a round Ford type. They match the ones that came off exactly.....I
> > thought. Now I'm questioning if they will stand up. If I take the cable
all
> > the way out and then pull it all in, it's fine until I stop and attempt
to
> > restart. When that happens the solenoids "click" but do not actually
"pull
> > in". By this I mean I hear an audible click, but measured with a fluke
> > meter no voltage passes. If I let the solenoids sit for about 30
seconds I
> > can then complete the cable take up.
> >
> > I've checked and thoroughly cleaned all connections from the solenoid
pack
> > to the battery.
> >
> > Any suggestions?
Daren
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F34C94.AC5FD02F@***.net...
> If you are asking whether to replace solenoids that will not work
> connect your batter with your winch, with new ones, that look like
> Ford's, than I vote yes.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> City Jeep wrote:
> >
> > I just replaced the solenoids on my 8274 with new ones from Advanced. I
> > used a round Ford type. They match the ones that came off exactly.....I
> > thought. Now I'm questioning if they will stand up. If I take the cable
all
> > the way out and then pull it all in, it's fine until I stop and attempt
to
> > restart. When that happens the solenoids "click" but do not actually
"pull
> > in". By this I mean I hear an audible click, but measured with a fluke
> > meter no voltage passes. If I let the solenoids sit for about 30
seconds I
> > can then complete the cable take up.
> >
> > I've checked and thoroughly cleaned all connections from the solenoid
pack
> > to the battery.
> >
> > Any suggestions?
#14
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
>I just replaced the solenoids on my 8274 with new ones from Advanced. I
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
#15
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
>I just replaced the solenoids on my 8274 with new ones from Advanced. I
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
#16
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
>I just replaced the solenoids on my 8274 with new ones from Advanced. I
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
#17
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
>I just replaced the solenoids on my 8274 with new ones from Advanced. I
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>used a round Ford type. They match the ones that came off exactly.....I
>thought. Now I'm questioning if they will stand up.
You need continuous duty "Ford type" solenoids rather than starter solenoids.
They look the same on the outside, but are not the same on the inside.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
#18
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
Thanks! Just talked to a guy at a starter shop and he told me the same
thing. I guess they were getting too hot and not working.
Daren
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040713121904.04229.00001457@mb-m15.aol.com...
> >I just replaced the solenoids on my 8274 with new ones from Advanced. I
> >used a round Ford type. They match the ones that came off exactly.....I
> >thought. Now I'm questioning if they will stand up.
>
> You need continuous duty "Ford type" solenoids rather than starter
solenoids.
> They look the same on the outside, but are not the same on the inside.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
thing. I guess they were getting too hot and not working.
Daren
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040713121904.04229.00001457@mb-m15.aol.com...
> >I just replaced the solenoids on my 8274 with new ones from Advanced. I
> >used a round Ford type. They match the ones that came off exactly.....I
> >thought. Now I'm questioning if they will stand up.
>
> You need continuous duty "Ford type" solenoids rather than starter
solenoids.
> They look the same on the outside, but are not the same on the inside.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
#19
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
Thanks! Just talked to a guy at a starter shop and he told me the same
thing. I guess they were getting too hot and not working.
Daren
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040713121904.04229.00001457@mb-m15.aol.com...
> >I just replaced the solenoids on my 8274 with new ones from Advanced. I
> >used a round Ford type. They match the ones that came off exactly.....I
> >thought. Now I'm questioning if they will stand up.
>
> You need continuous duty "Ford type" solenoids rather than starter
solenoids.
> They look the same on the outside, but are not the same on the inside.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
thing. I guess they were getting too hot and not working.
Daren
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040713121904.04229.00001457@mb-m15.aol.com...
> >I just replaced the solenoids on my 8274 with new ones from Advanced. I
> >used a round Ford type. They match the ones that came off exactly.....I
> >thought. Now I'm questioning if they will stand up.
>
> You need continuous duty "Ford type" solenoids rather than starter
solenoids.
> They look the same on the outside, but are not the same on the inside.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
#20
Guest
Posts: n/a
Re: 8274 Solinoid Replacement
Thanks! Just talked to a guy at a starter shop and he told me the same
thing. I guess they were getting too hot and not working.
Daren
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040713121904.04229.00001457@mb-m15.aol.com...
> >I just replaced the solenoids on my 8274 with new ones from Advanced. I
> >used a round Ford type. They match the ones that came off exactly.....I
> >thought. Now I'm questioning if they will stand up.
>
> You need continuous duty "Ford type" solenoids rather than starter
solenoids.
> They look the same on the outside, but are not the same on the inside.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
thing. I guess they were getting too hot and not working.
Daren
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040713121904.04229.00001457@mb-m15.aol.com...
> >I just replaced the solenoids on my 8274 with new ones from Advanced. I
> >used a round Ford type. They match the ones that came off exactly.....I
> >thought. Now I'm questioning if they will stand up.
>
> You need continuous duty "Ford type" solenoids rather than starter
solenoids.
> They look the same on the outside, but are not the same on the inside.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com