76 258 CJ-7 Camshaft specifications
#21
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
Yup, just like the '64 Rambler engine. 270 degrees is the stock
grind for the TJ's 4.0 liter. Anything more than nine to one will not
run on today's pump gas. Thank God for leaded aviation fuel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'm in Florida. So, there's no inspection. I don't intend to rely on
> (0-throttle) idle to navigate obstacles since we don't have rocks in north
> FL:)
> Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure it
> will. My concern's that the Clifford site lists multiple
> requirements/preferences for that grind, i.e. aftermarket springs to prevent
> binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion, etc.
> All in all, a full race cam. I think I'm leaning toward the 272deg cam but
> what do you think about a 280deg cam with Rhoades lifters to retard it a bit
> at idle?
> Anybody have any experience with Rhoades lifters? How's this setup sound?
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |¯¯¯L --O|||||||O-
> ()_)¯()_) ¯¯¯¯¯ )_)
> EM60qk 30.447439N 086.628959W
> "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> news:1044r8q1getmrf5@corp.supernews.com...
grind for the TJ's 4.0 liter. Anything more than nine to one will not
run on today's pump gas. Thank God for leaded aviation fuel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'm in Florida. So, there's no inspection. I don't intend to rely on
> (0-throttle) idle to navigate obstacles since we don't have rocks in north
> FL:)
> Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure it
> will. My concern's that the Clifford site lists multiple
> requirements/preferences for that grind, i.e. aftermarket springs to prevent
> binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion, etc.
> All in all, a full race cam. I think I'm leaning toward the 272deg cam but
> what do you think about a 280deg cam with Rhoades lifters to retard it a bit
> at idle?
> Anybody have any experience with Rhoades lifters? How's this setup sound?
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |¯¯¯L --O|||||||O-
> ()_)¯()_) ¯¯¯¯¯ )_)
> EM60qk 30.447439N 086.628959W
> "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> news:1044r8q1getmrf5@corp.supernews.com...
#22
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
Yup, just like the '64 Rambler engine. 270 degrees is the stock
grind for the TJ's 4.0 liter. Anything more than nine to one will not
run on today's pump gas. Thank God for leaded aviation fuel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'm in Florida. So, there's no inspection. I don't intend to rely on
> (0-throttle) idle to navigate obstacles since we don't have rocks in north
> FL:)
> Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure it
> will. My concern's that the Clifford site lists multiple
> requirements/preferences for that grind, i.e. aftermarket springs to prevent
> binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion, etc.
> All in all, a full race cam. I think I'm leaning toward the 272deg cam but
> what do you think about a 280deg cam with Rhoades lifters to retard it a bit
> at idle?
> Anybody have any experience with Rhoades lifters? How's this setup sound?
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |¯¯¯L --O|||||||O-
> ()_)¯()_) ¯¯¯¯¯ )_)
> EM60qk 30.447439N 086.628959W
> "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> news:1044r8q1getmrf5@corp.supernews.com...
grind for the TJ's 4.0 liter. Anything more than nine to one will not
run on today's pump gas. Thank God for leaded aviation fuel.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'm in Florida. So, there's no inspection. I don't intend to rely on
> (0-throttle) idle to navigate obstacles since we don't have rocks in north
> FL:)
> Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure it
> will. My concern's that the Clifford site lists multiple
> requirements/preferences for that grind, i.e. aftermarket springs to prevent
> binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion, etc.
> All in all, a full race cam. I think I'm leaning toward the 272deg cam but
> what do you think about a 280deg cam with Rhoades lifters to retard it a bit
> at idle?
> Anybody have any experience with Rhoades lifters? How's this setup sound?
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |¯¯¯L --O|||||||O-
> ()_)¯()_) ¯¯¯¯¯ )_)
> EM60qk 30.447439N 086.628959W
> "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> news:1044r8q1getmrf5@corp.supernews.com...
#23
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
Very good, then. Thanks for your advice, Bill, as well as CRWLR and
anyone else I missed. I think I got a bead on it. You've probably watched
my threads go from BB Chevy to V-6 but I'm probably gonna stick with the 258
and do something "different". It all matters on what drops in my lap before
I get the cash:)
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
anyone else I missed. I think I got a bead on it. You've probably watched
my threads go from BB Chevy to V-6 but I'm probably gonna stick with the 258
and do something "different". It all matters on what drops in my lap before
I get the cash:)
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
#24
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
Very good, then. Thanks for your advice, Bill, as well as CRWLR and
anyone else I missed. I think I got a bead on it. You've probably watched
my threads go from BB Chevy to V-6 but I'm probably gonna stick with the 258
and do something "different". It all matters on what drops in my lap before
I get the cash:)
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
anyone else I missed. I think I got a bead on it. You've probably watched
my threads go from BB Chevy to V-6 but I'm probably gonna stick with the 258
and do something "different". It all matters on what drops in my lap before
I get the cash:)
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
#25
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
Very good, then. Thanks for your advice, Bill, as well as CRWLR and
anyone else I missed. I think I got a bead on it. You've probably watched
my threads go from BB Chevy to V-6 but I'm probably gonna stick with the 258
and do something "different". It all matters on what drops in my lap before
I get the cash:)
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
anyone else I missed. I think I got a bead on it. You've probably watched
my threads go from BB Chevy to V-6 but I'm probably gonna stick with the 258
and do something "different". It all matters on what drops in my lap before
I get the cash:)
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
#26
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
No 10:1 on pump gas? I run 10.5:1 on 93 octane
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
#27
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
No 10:1 on pump gas? I run 10.5:1 on 93 octane
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
#28
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
No 10:1 on pump gas? I run 10.5:1 on 93 octane
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40429740.7810EA14@***.net...
> Yup, just like the '64 Rambler engine. 270 degrees is the stock
> grind for the TJ's 4.0 liter. Anything more than nine to one will not
> run on today's pump gas. Thank God for leaded aviation fuel.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'm in Florida. So, there's no inspection. I don't intend to rely on
> > (0-throttle) idle to navigate obstacles since we don't have rocks in
north
> > FL:)
> > Bill, you say that a 290deg cam will idle at 600-700RPM and I'm sure
it
> > will. My concern's that the Clifford site lists multiple
> > requirements/preferences for that grind, i.e. aftermarket springs to
prevent
> > binding, 650cfm 4Bbl, 10:1 compression pistons, 4.0 head conversion,
etc.
> > All in all, a full race cam. I think I'm leaning toward the 272deg cam
but
> > what do you think about a 280deg cam with Rhoades lifters to retard it a
bit
> > at idle?
> > Anybody have any experience with Rhoades lifters? How's this setup
sound?
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |¯¯¯L --O|||||||O-
> > ()_)¯()_) ¯¯¯¯¯ )_)
> > EM60qk 30.447439N 086.628959W
> > "CRWLR" <CRWLRJEFF@YAHOO.COM> wrote in message
> > news:1044r8q1getmrf5@corp.supernews.com...
#29
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
Who made your pistons?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Timo wrote:
>
> No 10:1 on pump gas? I run 10.5:1 on 93 octane
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Timo wrote:
>
> No 10:1 on pump gas? I run 10.5:1 on 93 octane
#30
Guest
Posts: n/a
Re: 76 258 CJ-7 Camshaft specifications
Who made your pistons?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Timo wrote:
>
> No 10:1 on pump gas? I run 10.5:1 on 93 octane
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Timo wrote:
>
> No 10:1 on pump gas? I run 10.5:1 on 93 octane